Abstract:The performance of large reciprocating compressors is strongly dependent on the geometry of gas chambers and valve pockets, both directly influencing the pressure losses along the flow path. Reliable and accurate numerical models are necessary for a proper prediction of the thermodynamic cycle of the compressor, hence of both the efficiency and the absorbed power. In order to account for the effect of the geometrical features, the detail level of the modeling technique needs to be suitable for capturing the most significant phenomena related to the physics involved. To this end, CFD simulations can represent a viable tool for the analysis of the working cycle. Due to the complexity of the geometry and the large extent of the fluid domain, unsteady three-dimensional CFD simulations are very demanding in terms of computational resources, resulting in unreasonably lengthy simulations and specialized hardware requirements.The present paper describes a two-dimensional CFD modelling strategy aimed at reducing the computational effort by ensuring a compromise between the accuracy of the results and the simulation costs. A simplified geometry is used to allow the reduction of the three-dimensional fluid domain to an equivalent two-dimensional representation. The suitability of using two-dimensional models for the numerical simulation of the thermodynamic cycle of large reciprocating compressors is analyzed and discussed. In the paper, the simulation results of a double-acting large bore cast iron cylinder are compared to experimental measurements. A satisfactory agreement was obtained when comparing the numerical data to the measurements of dynamic pressure sensors placed in the cylinder head, clearance volume adjustment plugs and suction and discharge nozzles. A comparison with the simulation results of low-order numerical models is also shown to highlight the enhancement in the performance predictability.The matching between experimental and simulated results, together with the short calculation time, confirms the high potential of the proposed solution in predicting the expected performance of the machine, in terms of indicated power and specific work. Moreover, additional benefits are related to the possibility of investigating the pressure oscillations and distributions in the cylinder chambers, and the mass flow rates for the analysis of the suction and discharge pipelines.

Performance Assessment of A Two-Stage Reciprocating Air Compressor

Dynamic Performance of Reciprocating Compressor with Capacity Regulation System

Analysis of Rod Reversal in Reciprocating Compressor with Capacity Regulating System

Performance analysis for a rotary compressor at high speed: experimental study and mathematical modeling

Performance testing with RC load approach in linear compressors

Performance Testing of Linear Compressors with Rc Approach

Energy-saving Technology and Experimental Research of Reciprocating Compressor

Performance evaluation of 2-C-470 compressor of gas recycle process at PT. Lotte Chemical Titan Nusantara

Modeling of a Two-Stage Rotary Compressor

Resistance Torque Based Variable Duty-Cycle Control Method for A Stage Ii Compressor

Theoretical assessment of the effectiveness of application single-stage long-stroke piston compressors in refrigeration and hydrocarbon gas liquefaction systems

Investigating a hermetic reciprocating compressor performance under variable lift limiter height using FSI method

Experimental Investigation on Off-Design Characteristics of R290 Rolling Piston Compressor

Comparative Evaluation of Methods for Calculating the Dynamics of Self-Acting Valves in Reciprocating Compressor Units

The analysis of the main directions for reducing the intensity of mass flows of the working fluid through leaks in the working chamber of a piston long-stroke low-speed compressor stage

Two-dimensional approach for the numerical simulation of large bore reciprocating compressors thermodynamic cycle

Performance Simulation Analysis of a Novel Dual-piston Two-Stage Carbon Dioxide Linear Compressor

A novel analytical solution for the system performance evaluation of advanced adiabatic compressed air energy storage suitable for variable process configuration and parameter

Investigation on in-cylinder and in-intercooler thermodynamic properties of miniature multi-stage reciprocating compressor with insufficient inter-stage volumes

Prediction of performance parameters of a hermetic reciprocating compressor under different discharge lift limiter heights by machine learning

Industrial Gas Turbine Performance: Compressor Fouling and On-Line Washing