Abstract:Amassive number of lithium ion (Li-ion) batteries are used in electric vehicles and the number is still growing rapidly. Li-ion batteries are sensitive to temperature—they likely degrade in an over-cold or an over-hot environment. Battery thermal management systems (BTMSs) are designed to control the battery temperature within the optimal range between 20 and 55°C. Thermal management is one important part of battery management systems. A good BTMS allows researchers to improve the performance, extend the life, and enhance the safety of a battery. We launch this Research Topic to collect the latest technologies and design methodology on BTMSs. Three papers have been published in this issue. Yang et al. designed a semiconductor refrigeration system for a 48 V Li-ion battery pack which often operates at high discharge/charge rates, as shown in Figure 1A. A thermal model of the BTMS was also developed for this semiconductor-based BTMS. This BTMS is integrated with air cooling, limiting the maximum temperature to less than 40°C, as long as the temperature difference is less than 1.6°C. The semiconductor-based BTMS is effective when the battery temperature and discharge rate are high. Wang et al. applied a flat heat pipe (FHP) to a BTMS, utilizing the extremely high thermal dissipation ability of the FHP to remove the heat from the battery, as well as to improve the temperature homogeneity among battery cells. The BTMS structure is presented in Figure 1B. A thermal network model was also developed for this BTMS and the simulation agreed with the experiment data. The thickness, porosity, and particle diameter of a sintered wick on the thermal performance of the battery was investigated and the FHP was optimized. An FHP allows a radiator to be placed aside the battery pack as a condensation sector, making the battery pack compact. Luo et al. designed a novel direct liquid cooling BTMS. With a unique structure shown in Figure 1C, the BTMS can be used for cylindrical battery cells with water as the thermal fluid, without worrying about the potential risks of the electric conductivities of water. A numerical model was developed and validated with the system. They investigated the effects of the coolant flowrate and suggested a high flowrate (>500 mL/min) is needed for the discharge at a rate above 3C of a 20-cell module. Multiple inlets were also suggested to improve the temperature uniformity. These studies have shown new prototypes of battery cooling with semiconductors, heat pipes, and direct liquid cooling, which could provide alternatives for thermal management in commercial battery modules. Edited and reviewed by: Sheng S. Zhang, United States Army Research Laboratory, United States

Investigation on performance of battery thermal management system using spray cooling

Experimental Investigation into the Use of Emergency Spray on Suppression of Battery Thermal Runaway

Theoretical and Experimental Investigations on Liquid Immersion Cooling Battery Packs for Electric Vehicles Based on Analysis of Battery Heat Generation Characteristics

Research on spray cooling performance based on battery thermal management

Parametric Investigation on the Performance of a Battery Thermal Management System with Immersion Cooling

The Experimental Study on a Novel Integrated System with Thermal Management and Rapid Cooling for Battery Pack Based on C6F12O Spray Cooling in a Closed-Loop

Experimental study on 18650 lithium-ion battery-pack cooling system composed of heat pipe and reciprocating air flow with water mist

Editorial: Advanced Battery Thermal Management Systems

A Review of Thermal Management and Heat Transfer of Lithium-Ion Batteries

Numerical and Experimental Investigation on the Performance of Battery Thermal Management System Based on Micro Heat Pipe Array

Investigation on forced air-cooling strategy of battery thermal management system considering the inconsistency of battery cells

A comparative investigation of two-phase immersion thermal management system for lithium-ion battery pack

Parametric investigation on the performance of a direct evaporation cooling battery thermal management system

Investigation into the effects of emergency spray on thermal runaway propagation within lithium-ion batteries

Comparative study on the performance of different thermal management for energy storage lithium battery

Analytical modeling and simulation of liquid cooling thermal management of a lithium-ion battery module

Battery thermal management system based on the forced-air convection: A review

Experimental investigation on intermittent spray cooling and toxic hazards of lithium-ion battery thermal runaway

Numerical investigation on thermal performance of battery module with LCP‐AFC cooling system applied in electric vehicle

Structural optimization of lithium-ion battery for improving thermal performance based on a liquid cooling system

Experimental and computational analysis on lithium-ion battery thermal management system utilizing air cooling with radial fins