Abstract:Amassive number of lithium ion (Li-ion) batteries are used in electric vehicles and the number is still growing rapidly. Li-ion batteries are sensitive to temperature—they likely degrade in an over-cold or an over-hot environment. Battery thermal management systems (BTMSs) are designed to control the battery temperature within the optimal range between 20 and 55°C. Thermal management is one important part of battery management systems. A good BTMS allows researchers to improve the performance, extend the life, and enhance the safety of a battery. We launch this Research Topic to collect the latest technologies and design methodology on BTMSs. Three papers have been published in this issue. Yang et al. designed a semiconductor refrigeration system for a 48 V Li-ion battery pack which often operates at high discharge/charge rates, as shown in Figure 1A. A thermal model of the BTMS was also developed for this semiconductor-based BTMS. This BTMS is integrated with air cooling, limiting the maximum temperature to less than 40°C, as long as the temperature difference is less than 1.6°C. The semiconductor-based BTMS is effective when the battery temperature and discharge rate are high. Wang et al. applied a flat heat pipe (FHP) to a BTMS, utilizing the extremely high thermal dissipation ability of the FHP to remove the heat from the battery, as well as to improve the temperature homogeneity among battery cells. The BTMS structure is presented in Figure 1B. A thermal network model was also developed for this BTMS and the simulation agreed with the experiment data. The thickness, porosity, and particle diameter of a sintered wick on the thermal performance of the battery was investigated and the FHP was optimized. An FHP allows a radiator to be placed aside the battery pack as a condensation sector, making the battery pack compact. Luo et al. designed a novel direct liquid cooling BTMS. With a unique structure shown in Figure 1C, the BTMS can be used for cylindrical battery cells with water as the thermal fluid, without worrying about the potential risks of the electric conductivities of water. A numerical model was developed and validated with the system. They investigated the effects of the coolant flowrate and suggested a high flowrate (>500 mL/min) is needed for the discharge at a rate above 3C of a 20-cell module. Multiple inlets were also suggested to improve the temperature uniformity. These studies have shown new prototypes of battery cooling with semiconductors, heat pipes, and direct liquid cooling, which could provide alternatives for thermal management in commercial battery modules. Edited and reviewed by: Sheng S. Zhang, United States Army Research Laboratory, United States

Comparative study on the performance of different thermal management for energy storage lithium battery

Analytical modeling and simulation of liquid cooling thermal management of a lithium-ion battery module

A manifold channel liquid cooling system with low-cost and high temperature uniformity for lithium-ion battery pack thermal management

A comparative study between air cooling and liquid cooling thermal management systems for a high-energy lithium-ion battery module

Thermal management scheme and optimization of cylindrical lithium-ion battery pack based on air cooling and liquid cooling

Cooling capacity of a novel modular liquid-cooled battery thermal management system for cylindrical lithium ion batteries

Performance characteristics of a novel heat pipe-assisted liquid cooling system for the thermal management of lithium-ion batteries

Performance analysis and comparison study of liquid cooling-based shell-and-tube battery thermal management systems

Thermal Performance Analysis of a Lithium-Ion Battery Thermal Management System with a Vapor Chamber and Minichannel Cold Plate

A review on the liquid cooling thermal management system of lithium-ion batteries

Experimental and numerical study of lithium-ion battery thermal management system using composite phase change material and liquid cooling

Cooling performance optimization of air-cooled battery thermal management system

Design and Optimization of a Liquid Cooling Thermal Management System with Flow Distributors and Spiral Channel Cooling Plates for Lithium-Ion Batteries

Numerical and Experimental Investigation on the Performance of Battery Thermal Management System Based on Micro Heat Pipe Array

Innovative liquid cooling channel enhanced battery thermal management (BTM) structure based on stepwise optimization method

Research on Air-Cooled Thermal Management of Energy Storage Lithium Battery

Thermal performance of a liquid-immersed battery thermal management system for lithium-ion pouch batteries

Cooling Efficiency Improvement of Air-Cooled Battery Thermal Management System Through Designing the Flow Pattern

A comparative investigation of two-phase immersion thermal management system for lithium-ion battery pack

Editorial: Advanced Battery Thermal Management Systems

Numerical Study on Cross-Linked Cold Plate Design for Thermal Management of High-Power Lithium-Ion Battery