Abstract:As a key component of a pure electric vehicle, the battery in an overheated state will have a direct impact on battery life and vehicle safety. To promote battery heat dissipation, a novel cobweb-like type (C-type) channel cooling plate with asymmetric inlet and outlet is designed. The C-type channel cooling plate is numerically simulated in two coolant flow directions ( I fd and II fd ), using the computational fluid dynamics software STAR-CCM+, and compared to the conventional serpentine type (S-type) channel. Meanwhile, the effects of three structural parameters (channel diameter, spacing, and cooling plate thickness) on maximum temperature and temperature difference of the C-type cooling plate, and pressure drop are investigated. Based on this, the C-type channel is optimized by orthogonal test. The results show that the C-type with II fd coolant flow direction has a better heat dissipation effect on the battery module than the C-type with I fd and S-type under the same conditions, and the maximum temperature and temperature difference are respectively reduced by 0.2% and 17.8%, while the pressure drop is increased by 17.3%. In addition, increasing channel diameter can obtain good battery temperature distribution and smaller pressure drop, while the increase of cooling plate thickness and channel spacing has a greater effect on the battery temperature difference compared to the change of maximum temperature. Finally, the results of the orthogonal tests show that the cooling effect is best when the diameter of the cobweb-like channel cooling plate is 7 mm, the thickness of the cooling plate is 12 mm, and the channel spacing is 16 mm, and the maximum temperature and temperature difference are reduced by 0.7% and 6.8%, respectively, and the pressure drop is reduced by 37.6% compared to the initial cobweb-like channel scheme. This offers a fresh perspective on cooling plate channel design in liquid-cooled battery thermal management.

Numerical investigation on thermal performance of battery module with LCP‐AFC cooling system applied in electric vehicle

Numerical Investigation on Optimal Design of Battery Cooling Plate for Uneven Heat Generation Conditions in Electric Vehicles

A parametric study on thermal management of an air-cooled lithium-ion battery module for plug-in hybrid electric vehicles

Theoretical and Experimental Investigations on Liquid Immersion Cooling Battery Packs for Electric Vehicles Based on Analysis of Battery Heat Generation Characteristics

Numerical investigation on a lithium-ion battery thermal management system utilizing a double-layered I-shaped channel liquid cooling plate exchanger

Numerical Study on a Water Cooling System for Prismatic LiFePO4 Batteries at Abused Operating Conditions

Thermal performance of a lithium-ion battery thermal management system with vapor chamber and minichannel cold plate

Investigation on liquid cold plate thermal management system with heat pipes for LiFePO4 battery pack in electric vehicles

Optimization of the Heat Dissipation Performance of a Lithium-Ion Battery Thermal Management System with CPCM/Liquid Cooling

Numerical research on lithium-ion battery thermal management utilizing a novel cobweb-like channel cooling plate exchanger

Numerical study on heat dissipation performance of a lithium-ion battery module based on immersion cooling

Numerical Analysis on Thermal Management Performance of Lithium-Ion Battery Pack with Liquid Cooling

Experiments and Simulation on the Performance of a Liquid-Cooling Thermal Management System including Composite Silica Gel and Mini-Channel Cold Plates for a Battery Module

Thermal behavior study of discharging/charging cylindrical lithium-ion battery module cooled by channeled liquid flow

Thermal Management of a Li-Ion Battery for Electric Vehicles Using PCM and Water-Cooling Board

Simulation and Analysis of Lithium-Ion Battery Thermal Management System Based on Wavy Liquid Cooling Channel

A Novel Modular Liquid-cooled Battery Thermal Management for Cylindrical Lithium-ion Battery Module

Research on the heat dissipation performances of lithium-ion battery pack with liquid cooling system

Numerical Simulation of Immersed Liquid Cooling System for Lithium-Ion Battery Thermal Management System of New Energy Vehicles

A numerical study of a novel centrally bifurcated mini-channel liquid cooling plate for enhanced heat transfer characteristics

Thermal performance of liquid cooling based thermal management system for cylindrical lithium-ion battery module with variable contact surface