Octave Bandwidth Doherty Power Amplifier Using Multiple Resonance Circuit for the Peaking Amplifier

Hyunuk Kang,Hwiseob Lee,Wooseok Lee,Hansik Oh,Wonseob Lim,Hyungmo Koo,Cheon-seok Park,Keum Cheol Hwang,Kang-Yoon Lee,Youngoo Yang

DOI: https://doi.org/10.1109/tcsi.2018.2869905

2019-02-01

Abstract:This paper presents a broadband Doherty power amplifier (DPA) design with an octave bandwidth based on a new load network consisting of a quasi-lumped impedance transformer for the carrier amplifier, a multiple resonance circuit for the peaking amplifier, and a broadband post-matching network. The quasi-lumped impedance transformer and the multiple resonance circuit were designed based on accurate equivalent circuits for internal components inside the packaged transistor. Based on power bandwidth analysis, optimum susceptance provided by the multiple resonance circuit at the peaking amplifier, was obtained. The proposed broadband DPA was designed using 45 W gallium–nitride high electron mobility transistor for both carrier and peaking amplifiers. For continuous-wave signals in frequency range of 0.9 to 1.8 GHz, the implemented broadband DPA exhibited a drain efficiency of 54.2% to 73.4% at peak output power of 49.7 to 51.4 dBm and a drain efficiency of 41.7% to 58.0% at output back-off of 6 dB. For the down-link long-term evolution signal with a channel bandwidth of 10 MHz and a peak-to-average power ratio of 6.5 dB, a drain efficiency of 41.3% to 57.4% and an adjacent channel leakage power ratio of −22.5 to −30.2 dBc at an average output power of 43.2 to 449 dBm were achieved at an octave bandwidth.