Abstract:The toughening effect of styrene–butadiene rubber (SBR) rubber and the reinforcing effect of silicon carbide (SiC) nanoparticles on mechanical properties and microstructure of PP/SBR/SIC composites was investigated. Polypropylene is a useful and widely consumed thermoplastic with very good properties that can be mixed with a combination of rubber and nanoparticles in order to eliminate its shortcomings. In this paper, the simultaneous combination of both the toughening effect of styrene–butadiene rubber (SBR) and the reinforcing effect of silicon carbide (SiC) nanoparticles were investigated in polypropylene matrix. Mechanical properties (tensile and impact strength [TS and IS]) of compounds were analyzed using the central composite design approach in Design‐Expert software. With two factors for input variables of SBR and SiC weight percentages, and their five levels (5, 10, 15, 20, and 25) and (0, 1.5, 3, 4.5, and 6), respectively, the central composite design approach employs 11 experiments for creation of models and the analysis of variance investigations with two output responses of TS and IS. Statistical results revealed that SBR and SiC contents had a significant effect on TS, IS, and the microstructure of compounds, as confirmed by scanning electron microscopy and energy‐dispersive spectroscopy images. To maximize all mechanical properties simultaneously with desirability functions, TS and IS of the optimum sample were computed to be 21.98 MPa and 8.66 kJ/m2 in amounts of 13.45 and 2.80 weight percentage (wt%) of SBR and SiC, respectively. Highlights By increasing silicon carbide (SiC) in polypropylene/styrene–butadiene rubber (SBR), tensile strength decreases after a peak due to agglomeration effect. By increasing SiC in polypropylene/SBR, impact strength decreases after a peak due to agglomeration effect. By increasing SiC, the rubber particles' dimensions decrease according to scanning electron microscopy analysis. Simultaneous maximum of tensile strength and impact strength are 21.98 MPa and 8.66 KJ/m2, respectively. Optimum value of SBR and SiC in above maximums are 13.45 and 2.8 wt%, respectively.

Research and development of a composite with transparent polypropylene fiber part II: multi-quality optimization parameter design for high impact resistance of polypropylene/enhanced by rubber segment-styrene ethylene/butylene styrene composites

Enhanced Multiphase Interfacial Interaction of Impact Polypropylene Copolymer by In-Situ Introducing Polyethylene

Optimization of Reaction Conditions for Polyurethane Foam Synthesis with Liquefied Corn Stalk by Response Surface Methodology

Optimization of Fused Deposition Modeling Process Parameters and Dynamic Mechanical Analysis of 3D Printed Polycarbonate/Acrylonitrile-Butadiene-Styrene Composite Loaded with Tetrabromobiphenol-A and Microcrystalline Cellulose

Optimization of impact strength and elastic modulus of polyamide-based nanocomposites: Using particle swarm optimization method

Fabrication Of Polypropylene Blends With Excellent Low-Temperature Toughness And Balanced Toughness-Rigidity By A Combination Of Epr And Seeps

Evaluating Processing Parameter Effects on Polymer Grades and Plastic Coloring: Insights from Experimental Design and Characterization Studies

Balanced toughening and strengthening of ethylene–propylene rubber toughened isotactic polypropylene using a poly(styrene-b-ethylene–propylene) diblock copolymer

Enhancing the foaming properties of polypropylene/basalt fiber composites by altering their rheological and crystallization behavior via polyethylene–octene blending modification

Carbon Fiber Reinforced Recycled Polypropylene/Polyolefin Elastomer Composites with High Mechanical Properties

Mechanical properties and structural characteristics of PP/PP-g-SBR nanocomposites prepared by dynamical photografting

Versatile Polypropylene Copolymers from a Pilot-Scale Spheripol II Process

The Optimization of Process Parameters and Characterization of High-Performance CF/PEEK Composites Prepared by Flexible CF/PEEK Plain Weave Fabrics

Low-Density and High-Performance Fiber-Reinforced PP/POE Composite Foam via Irradiation Crosslinking

Properties Optimization of Polypropylene/Montmorillonite Nanocomposite Drawn Fibers

Machine learning assisted optimization of blending process of polyphenylene sulfide with elastomer using high speed twin screw extruder

Optimization on the thermal and tensile influencing factors of polyurethane-based polyester fabric composites

The combined effect of impregnated rollers configuration and glass fibers surface modification on the properties of continuous glass fibers reinforced polypropylene prepreg composites

Optimization of polypropylene high-strength injection molding welding and interface structure analysis

The optimization of mechanical properties of polypropylene/styrene butadiene rubber/silicon carbide nanocomposites using response surface methodology

The One/Multi-objective Optimization for Tensile Yield and Impact Strength Responses of Optical PC/PMMA Blends