Abstract:Carbon fiber reinforced hydroxyapatite (CF/HA) composites have been considered as a promising candidate for load-bearing bone replacement. However, high-temperature sintering decomposes HA in CF/HA composites, thereby causing oxidation damage in carbon fibers and decreasing the mechanical properties of the composites. In this study, CF/HA composites with excellent mechanical properties and biological activities were fabricated by spark plasma sintering (SPS). The mechanical properties and microstructures of the composites under different sintering temperatures and fiber contents were systematically investigated. Oxidative damage in CF and interfacial problem between fibers and the matrices in the composites were prevented in contrast to that in CF/HA composites prepared through pressureless or hot-pressing sintering. The reinforcing effect of CF was greatly enhanced owing to the absence of oxidative damage. FTIR and XRD results indicates that the HA phases in the composites did not decompose. HA particles size prepared by SPS was smaller than the one prepared by the traditional sintering method. The addition of CF with excellent electrical and thermal conductivities reduced thermal and electrical gradients in the composites during SPS. Accordingly, CF/HA composites with a refined microstructures and improved mechanical properties were obtained. The hardness and bending strength of 0.5 wt% CF-reinforced HA composites (0.5 C F/HA) were 574.0 H V and 110.4 MPa, respectively. The fracture toughness and brittleness index of 0.5 C F/HA were 2.41 MPa m1/2 and 2.59 μm−1/2, respectively. Importantly, the fracture toughness and bending strength of 0.5 C F/HA were can match the properties of compact bones. The in vitro behaviour of the CF/HA composites for cell morphology and proliferation were evaluated using MC3T3-E1. MC3T3-E1 cultured on the composites fabricated SPS showed significantly higher attachment and proliferation rates than those cultured on composites prepared through pressureless sintering. The CF/HA prepared by SPS showed potential as load-bearing bone substitutes owing to their excellent properties.

Fabrication of Al2O3–SiCw protective coatings on carbon fiber by the sol-spraying method

Effect of Submicron SiC Particles on the Properties of Alcocrfeni High Entropy Alloy Coatings

Preparation of silicon coated-carbon fiber reinforced HA bio-ceramics for application of load-bearing bone

Effect of Al2O3 coating thickness on microstructural characterization and mechanical properties of continuous carbon fiber reinforced aluminum matrix composites

Carbon fiber reinforced hydroxyapatite composites with excellent mechanical properties and biological activities prepared by spark plasma sintering

Fabrication and properties of supersonic plasma sprayed Al2O3 coating on porous Si3N4 substrate

In-situ SiC nanowires reinforced SiC-based multicomponent ceramic coating for protecting SiOC/CF composites

Design and fabrication of carbon fibers with needle-like nano-HA coating to reinforce granular nano-HA composites

Plasma-Sprayed Hydroxyapatite Coating on Carbon/Carbon Composite Scaffolds for Bone Tissue Engineering and Related Tests in Vivo

Study on the corrosion resistance of SiC particle-reinforced hydroxyapatite‐silver gradient bioactive ceramic coatings prepared by laser cladding

Critical Role of C/SiO2 Composite Coating in Enhancing the Mechanical and Antioxidation Properties of 3D Needled Carbon Fibers

Improvement of interface between Al and short carbon fibers by α-Al2O3 coatings deposited by sol–gel technology

Improving the Interfacial Strength of Silicone Resin Composites by Chemically Grafting Silica Nanoparticles on Carbon Fiber

Effect of Al2O3 addition on the microstructure and oxidation behavior of SiC coating prepared by pack cementation on C/C composites

Oxidation resistance improvement of carbon fiber nonwoven fabrics through SiC coating technology

High-quality SiC-HfC coating with interpenetrating structure based on a two-step low temperature molten salt method

[Hydroxyapatite bioactive coating on carbon/carbon composites]

Preparation of in-situ synthesized TiC/AlSi30Cu5 coating by high velocity oxy-fuel (HVOF) spraying: Microstructure evolution, mechanical properties, and tribological behavior

Ablation mechanism and morphology evolution of the HfC-SiC coating for C/C composites deposited by supersonic atmospheric plasma spraying

Facile Preparation of a SiC@SiO2 Nanowire-Toughened ZrB2–SiC/SiC Bilayer Coating with Good Interfacial Bonding, High Toughness, and Excellent Cyclic Ablation Resistance on C/CA Composites

Toughening by SiC Nanowires in a Dense SiC–Si Ceramic Coating for Oxidation Protection of C/C Composites