Abstract:A double-layer coating composed of MoSi2-SiO2-SiC/ZrB2-MoSi2-SiC was designed and successfully constructed by a novel combination of precursor pyrolysis assisted sintering and rapid sintering to improve the ablation resistance of SiOC ceramic modified carbon fiber needled felt preform composites (CSs). The ZrB2-MoSi2-SiC inner layer coating was in relatively uniform distribution in the zone of 0-3 mm from the surface of CSs through the slurry/precursor infiltration in vacuum and SiOC precursor pyrolysis assisted sintering, which played a predominant role in improving oxidation and ablation resistance and maintaining the morphology of CSs. The MoSi2-SiO2-SiC outer layer coating was prepared by the spray and rapid sintering to further protect CSs from high-temperature oxidation. The ablation resistance of CSs coated with double-layer coating was evaluated by an oxygen-acetylene ablation test under the temperature of 1600-1800 degrees C with different ablation time of 1000 and 1500 s. The results revealed that the mass recession rates increased with the rise of ablation temperature and extension of ablation time, ranging from 0.47 g/(m(2).s) to 0.98 g/(m(2).s) at 1600-1800 degrees C for 1000 s and from 0.72 g/(m(2).s) to 0.86 g/(m(2).s) for 1000-1500 s at 1700 degrees C, while the linear recession rates showed negative values at 1700 degrees C due to the formation of oxides, such as SiO2 and ZrO2. The ablation mechanism of the double-layer coating was analyzed and found that a SiO2-ZrO2-Mo4.8Si3C0.6 oxidation protection barrier would be formed during the ablation process to prevent the oxygen diffusion into the interior CSs, and this study provided a novel and effective way to fabricate high-temperature oxidation protective and ablation resistant coating.

Critical Role of C/SiO2 Composite Coating in Enhancing the Mechanical and Antioxidation Properties of 3D Needled Carbon Fibers

Oxidation resistance improvement of carbon fiber nonwoven fabrics through SiC coating technology

Influence of SiC Coating on Antioxidation Property of Carbon Fibers

Enhanced Interfacial, Mechanical, and Anti-Hygrothermal Properties of Carbon Fiber/cyanate Ester Composites with the Catalytic Sizing Agents of Titanium Epoxy

Preparation and oxidation behavious of SiO2 and SiC coating 3-D braided carbon fiber

Microstructure And Oxidation Resistance Of Carbon/Carbon Composites Coated With Si3n4-Si/Mosi2-Sic Multi-Layers By Slurry Coating And Post Heat-Treatment Process

Oxidation Properties of Three Dimensional (3-D) Carbon Fiber Preform Coated by SiC-SiO2

Oxidation protection of carbon fibers by a reaction sintered nanostructured SiC coating

Oxidation Properties of Three Dimensional (3-D) Carbon Fiber Preform Coated by SiC-SiO<sub>2</sub>

Ti X O Y -Tic X -Ti 5 Si 3 /Glass-Ceramics Oxidation Protection Coating for C F /sic Composites

Achieving the synergy of superior damage tolerance and oxidation resistance of 2D Cf/ZrB2-SiC composites via fiber heat treatment

A Novel Combination of Precursor Pyrolysis Assisted Sintering and Rapid Sintering for Construction of Multi-Composition Coatings to Improve Ablation Resistance of SiOC Ceramic Modified Carbon Fiber Needled Felt Preform Composites

Improvement of Strength and Oxidation Resistance for SiC/graphite Composites by SiC Coating

Preparation and Oxidation Behavior of Three-Dimensional Braided Carbon Fiber Coated by Sic

Effect of SiC Nanowires on the Mechanical and Oxidation Protective Ability of SiC Coating for C/C Composites

Oxidation Properties of Three-Dimensional (3-D) Braided Carbon Fibers Coated with SiC

Study on Oxidation Kinetics of SiO_2-Al_2O_3 Composite Coating/3-D Carbon Fiber Braid

In-situ SiC nanowires reinforced SiC-based multicomponent ceramic coating for protecting SiOC/CF composites

High-quality SiC-HfC coating with interpenetrating structure based on a two-step low temperature molten salt method

STUDY OF MICRO-OXIDATION PROPERTIES AND MECHANISM OF SIO2 COATING / 3-D CARBON FIBER BRAID THROUGH MULTI-HEATING RATES

Preparation and anti-oxidation properties of Si(O)C coated carbon-bonded carbon fibre composites