Abstract:This study presents the alloy development of a new class of L12-strengthened Co-Al-Nb-based alloys with high γ′-solvus temperatures together with superb strengths at both ambient and elevated temperatures. The L12-Co3(Al, Nb) phase was found to be in equilibrium with the γ-Co matrix and the B2-CoAl phase in the ternary Co-10Al-3Nb alloy after an isothermal aging at 700 °C; however, it transformed into the Laves phase as the aging temperature increased to 800 °C. Alloying additions of Ni helped to suppress the B2 phase formation, resulting in a clean γ-γ′ dual-phase microstructure. Ti and Ta elements further stabilized the L12 structure and increased the γ′-solvus temperature to 1150 °C without inducing the formation of any other deleterious intermetallic phases. The newly developed Co-Al-Nb-Ni-Ti-Ta multicomponent Co-rich alloy has demonstrated outstanding yield strengths at both ambient and elevated temperatures, reaching 1023 ± 27 MPa at 25 °C and 897 ± 53 MPa at 700 °C, respectively. Furthermore, electron microscopy analyses uncovered unique deformation substructures, in which plasticity is predominantly carried out via nanoscale matrix-channel-confined stacking faults. As determined by the first-principle calculations, the absence of particle shearing upon deformation at ambient temperature is ascribed to the ultrahigh planar fault energies of the multicomponent γ′ precipitates. High-density superlattice-stacking-fault shearing and their interactions are responsible for the yield anomaly at 700 °C. These findings not only provide the fundamental understanding of the deformation behavior of the L12-strengthened alloys, but also demonstrate the great potential for developing next-generation high-temperature structural materials based on the multicomponent Co-rich alloy systems.

Microstructure and strength of a novel heat-resistant aluminum alloy strengthened by T-Al6Mg11Zn11 phase at elevated temperatures

Microstructure and strength of a novel heat-resistant aluminum alloy strengthened by T-Al6Mg11Zn11 phase at elevated temperatures

Tensile Properties of a Heat-Resistant Aluminium Alloy Strengthened by T-Al6Mg11Zn11 Intermetallic Phase

Microstructure characteristics of an ultra-high strength extruded Al-4.7Cu–1Li-0.5Mg-0.1Zr–1Zn alloy during heat treatment

The Mechanical Properties of Intermetallic Ni50−xTi50Alx Alloys (X=6,7,8,9)

High Temperature Tensile Deformation Behavior of New Heat Resistant Aluminum Alloy

High-Temperature Tensile Strength of Al10Co25Cr8Fe15Ni36Ti6 Compositionally Complex Alloy (High-Entropy Alloy)

A Quantitative Phase Analysis by Neutron Diffraction of Conventional and Advanced Aluminum Alloys Thermally Conditioned for Elevated-Temperature Applications

High-Temperature Mechanical Behavior of an As-Extruded Al-5Zn-2Mg-0.3Cu (in wt.%) Alloy

Microstructure Evolution and Mechanical Properties of High Performance Mg–10Gd–2Y–0·5Zn–0·3Zr Alloy During Heat Treatments

Microstructure and Mechanical Properties of a Highly Alloyed Al–Zn–Mg–Cu–Zr Alloy Under T6I4 and T6R6I4 Agings

Microstructure and Mechanical Properties of Novel Ti-Al- Mn- W Alloy

Enhanced High Temperature Mechanical Properties and Heat Resistance of an Al–Cu–Mg–Fe–Ni Matrix Composite Reinforced with In-Situ TiB 2 Particles

Microstructure and properties of a new Al–Cu–Mg–Zn–Zr–Ti heat resistant aluminum alloy

Mechanical Properties of a Novel High-Strength Aluminum-Lithium Alloy

L12-strengthened Multicomponent Co-Al-Nb-based Alloys with High Strength and Matrix-Confined Stacking-Fault-mediated Plasticity

The Study of Microstructure and Mechanical Properties of High Strength and Toughness Casting Al-Cu Alloy

Towards Superior High Temperature Properties in Low Density AlCrFeNiTi Compositionally Complex Alloys

Microstructural Evolution and Mechanical Properties of Cast Al-3li-1.5cu-0.2zr Alloy During Heat Treatment

Enhanced high temperature mechanical properties and heat resistance of an Al–Cu–Mg–Fe–Ni matrix composite reinforced with in-situ TiB2 particles

Microstructure and High-Temperature Mechanical Properties of New-Type Heat-Resisting Aluminum Alloy Al6.5Cu2Ni0.5Zr0.3Ti0.25V under the T7 Condition