Abstract:With the continuous upgrading of hypersonic vehicles, a new design requirement for imaging window is put forward, that is, conformal window to improve aerodynamic characteristics, which requires the supersonic cooling film and optical window to maintain the same curvature shape as the aircraft body.This paper investigates the mixed-layer flow evolution on a convex wall (CV). The flow field structure of the mixed layer is captured using a nanoparticle-based planar laser scattering technique in a Ma =6 hypersonic static wind tunnel, combined with fractal dimension to investigate the location of mixed-layer instability. Results of pressure, and impulse of compression ( Ip ) evolution along the flow direction were obtained using numerical simulation techniques. The results show that the total incoming pressure ( P 0 ) has a significant effect on the flow evolution of the mixed layer, and as P 0 increases, the ratio of static pressure (RSP) decreases, the position of the mixed layer instability is delayed, and the flow velocity of the typical vortex structure increases. The presence of favorable gradients at the CV wall allows the pressure to drop along the flow direction, and the pressure is boosted when the supersonic air film along the tangential direction of the wall is in operating condition. However, as P 0 increases, RSP decreases with it, and the lifting effect of the pressure on the CV decreases. The flow field is affected by the expansion effect of the CV, and Ip decreases along the flow direction. The supersonic air film can weaken the expansion effect on the CV and thus suppress the decrease of Ip . The change rate of Ip ( ΔIp ) is significantly affected by P 0 , in the range of bending impulse | I Φ |=0.191~3.62, ΔIp decreases from 178.67% to 12.02% when P 0 =0.5Mpa and ΔIp decreases from 40.38% to 5.64% when P 0 =1.0MPa. ΔIp decreases as | I Φ | increases, but the decrease weakens as P 0 increases. The results reveal the flow evolution law of hypersonic mixed layer under the influence of convex curvature, and provide a certain reference for the shape design of hypersonic vehicle to achieve aerodynamic drag reduction and thermal protection characteristics.

Flow-induced vibration analysis of a vehicle's front side window glass

Comparison of hydrodynamic and acoustic pressure on automotive front side window

Curved tempered vacuum glazing: Mechanical model, preparation and wind load performance

Vibration characteristics of outer windshield structures of high-speed trains based on fluid–structure interactions

Design and Optical Performance Analysis of Large-Aperture Optical Windows for Structural Vibration Reduction

Study For Windshield Against Bird-Impact By Simulation And Experiment

A damage model for the simulation of crack initiation and propagation in automotive windshield laminated glass structures

Impact Fracture Simulation of Laminated Glass Based on Thick Shell Elements and a Cohesive Zone Model

Experimental Study of an Active Window for Silent and Comfortable Vehicle Cabins

Characteristics of Windshield Cracking Upon Low-Speed Impact: Numerical Simulation Based on the Extended Finite Element Method

Modeling And Experimental Studies Of Crack Propagation In Laminated Glass Sheets

Modal Analysis and Flow Control on a Reduced Scale SUV

Experimental study on mechanical behavior of PVB laminated glass under quasi-static and dynamic loadings

Vibration identification and sound insulation of triple glazing

Numerical and experimental-based framework for vibro-acoustic coupling investigation on a vehicle door in the slamming event

Aeroelastic Modeling of Wind Loading on A Cable-Net Supported Glass Wall

Study on The Flow Evolution of Mixed Layer with Convex Curvature Wall Under Hypersonic Conditions

Numerical study on flow-induced vibrations of elastically mounted rectangular cylinders without and with barrier walls

Test and analysis of window vibration for anti-laser-eavesdropping

CFD Analysis on Effect of Front Windshield Angle on Aerodynamic Drag

Dynamic three-dimensional stress prediction of window glass under thermal loading