Abstract:The commutation torque ripple of a brushless dc motor (BLDCM) in a six-step driving mode generates vibration noise. To minimize the commutation torque ripple of the BLDCM, this article analyzes the cause of torque ripple and establishes the model of torque ripple suppression by using the phase current predictive method based on the trapezoidal back electromotive force (EMF). In addition, based on the prediction model of the non-commutation phase current, the pulsewidth modulation model predictive control (PWM-MPC) algorithm is proposed. By changing the duty cycle with prior evaluation, the predictive control avoids commutation current hopping, thereby reducing torque ripple during commutation. This control approach is more accessible to be implemented, because it does not require changing the topology of the motor driving circuit. Simulation models of the proposed control scheme constructed in the MATLAB/Simulink environment are given, compared with the conventional square-wave driving method. Moreover, experiments are performed to verify the feasibility. The output torque during experiments is transmitted to the computer software through the torque transducer. Compared with the traditional driving methods, the simulation and experimental results show that the proposed novel algorithm in this article could suppress the torque ripple efficiently.

Optimal Duty Cycle Method to Suppress the Commutation Torque Ripple of Brushless DC Motor in Braking Mode

Research on PWM Method in Brushless DC Motor

Reduction of Commutation Torque Ripple in Brushless DC Motors

Steady Performance Analysis on Single-Phase Brushless DC Motor

Research on Suppressing Commutation Torque Ripple of BLDCM Based on Zeta Converter

A Novel Strategy to Suppress Commutation Torque Ripple in Brushless DC Motor Based on Unitive Formula

Research on BLDC Motor Torque Ripple with Specific Modulation Duty Cycle Control During Commutation

Commutation Torque Ripple Restraint in BLDC Motor over Whole Speed Range

Model Predictive Control Method of Torque Ripple Reduction for BLDC Motor

Torque Ripple Reduction of Brushless Dc Motor on Current Prediction and Overlapping Commutation

Torque Ripple Reduction Strategy for Brushless DC Motor Based on Output Mode Reconstruction of Cuk Converter

Suppression of torque ripple due to phase commutation in brushless DC motor drives considering the stator resistance

A Novel PWM Scheme to Eliminate the Diode Freewheeling in the Inactive Phase in BLDC Motor

A New Method of Torque Ripple Minimization for Brushless DC Motors

A Practical Method to Eliminate the Conduction Torque Ripple in BLDCM Using Cascade Topology

Commutation Torque Ripple Reduction Strategy of Brushless DC Motor Drives Based on Boosting Voltage of DC-Link Small Capacitor

Suppressing Control of Rising Bus Voltage for Switched Reluctance Motor in Braking Operation

Torque ripple reduction of BLDC motor based on DC bus voltage automatic selection circuit and neutral point clamped three-level inverter control

A New Torque Control Method for Torque Ripple Minimization of BLDC Motors with Un-Ideal Back EMF

Effective Torque Ripple Reduction of Permanent Magnet Brushless DC Motor

A Novel Commutation Torque Ripple Suppression Scheme in BLDCM by Sensing the DC Current