Abstract:According to California's 2016 Building Energy Efficiency Standards, the percentage flicker of light-emitting diode (LED) lighting fixtures should be below 30%. However, the percentage flicker of commercially available linear power supplies is generally between 25% and 99.9%; thus, some LED lighting fixtures that use linear power supplies have been unable to enter the European or American markets. The traditional method of effectively reducing flicker involves increasing the capacitance of the electrolytic capacitor of the power supply, which causes an increase in the height of the lamp board components as well as shadowing and dark band phenomena. This paper presents a power supply circuit that uses only electrolytic capacitors with low capacitance and exhibits constant power, constant light output, and a lamp board thickness of only 8 mm; it can achieve a percentage flicker of less than 10%, which exceeds international standards. Power efficiency is a crucial performance indicator of linear power supplies. Because linear power supplies are mostly integrated circuits (ICs) with extremely small package volumes, higher power efficiency results in lower heat loss. The international standard for the power efficiency of linear power supplies is approximately 75%. A multistage switching mechanism is used in the proposed power supply to achieve an overall efficiency of > 88%. Under an input power of 12 W, a 10% increase in efficiency reduces the heat by 1.2 W, which can considerably reduce the difficulty and cost of heat dissipation in IC packages. By combining the aforementioned technologies, the proposed power supply can achieve high efficiency and low percentage flicker, thereby improving the shortcomings of traditional linear power supplies. Currently, the driver-on-board (DO- ) module of the proposed power supply is in the trial production phase, and its market entry will be accelerated to expand the market share of linear power supplies.

LED Driver Achieves Electrolytic Capacitor-Less and Flicker-Free Operation With an Energy Buffer Unit

An Electrolytic-Capacitorless And Inductorless Ac Direct Led Driver With Power Compensation

Single-Stage LED Driver Achieves Electrolytic Capacitor-Less and Flicker-Free Operation With Unidirectional Current Compensator

A Capacitorless and Low‐Optical‐Flicker AC Direct LED Driving IC and System Applied to Street Lighting

A linear constant current LED driver without off-chip inductor and capacitor

A Linear Constant Current LED Driver with No Off-Chip Inductor or Capacitor

A Single-Stage Primary Side Controlled Flyback LED Driver

Electrolytic-capacitor-less high-power LED driver

A Primary Side Feedback Control for Flyback LED Driver with No Output Voltage Feedback Resistors

Analysis and design considerations of two-stage AC-DC LED driver without electrolytic capacitor

A Staby and Design of the High Effideney and Nigh Voltage Driver of the White Light LED

A Method of Reducing the Peak-to-Average Ratio of LED Current for Electrolytic Capacitor-Less AC–DC Drivers

A primary side controlled single-stage flyback LED driver with high power factor and high accuracy

Adaptive Voltage Control for Bidirectional Converter in Flicker-Free Electrolytic Capacitor-Less AC–DC LED Driver

A New Electrolytic Capacitor-less LED Driver with Coupled-Inductor

Bipolar Ripple Cancellation Method to Achieve Single-Stage Electrolytic-Capacitor-Less High-Power LED Driver

Ultra-Low Percentage Flicker High-Efficiency Direct AC LED Driver Using Constant Power Technology

A More Efficient PFC Single-Coupled-Inductor Multiple-Output Electrolytic Capacitor-Less LED Driver With Energy-Flow-Path Optimization

A Dimmable and Power-Compensated AC Direct LED Driver with High Efficiency

A Flexible Mode Electrolytic Capacitor-Free LED Driver With High Efficiency Over a Wide Range of Input Voltage

A Single-Switch AC–DC LED Driver Based on a Boost-Flyback PFC Converter With Lossless Snubber