Abstract:In this article, a bridgeless universal voltage‐range AC‐fed LED driver is proposed. It operates in discontinuous mode (DCM) to achieve inherent PFC at low input current THD and incorporates a ripple diversion circuit (RDC), which eliminates ECs to extend the lifespan with flicker‐free operation. Summary In the state of the art of AC‐fed light‐emitting diode (LED) drivers, power factor correction (PFC), second harmonic LED current ripple elimination, low current total harmonic distortion (iTHD), removal of electrolytic capacitors (EC) and flicker‐free operation are the major challenging issues. This paper proposes a bridgeless universal voltagerange AC‐fed LED driver that overcome the major issues of LED driver. The bridgeless buck–boost PFC configuration minimizes the losses relative to the front‐end bridge rectifier‐based configurations. Operating in discontinuous conduction mode (DCM), the source current tracks the input voltage shape for a wide operating range, achieves inherent PFC and maintains low input current THD. Also, this provides significant reduction in the output current ripple with the ripple diversion circuit (RDC) connected in shunt across the LED load, which relatively reduces and utilizes low value of output capacitance. Hence, a flicker‐free operation is achieved without the use of electrolytic capacitors. In addition, the elimination of ECs improves the operating lifespan of the proposed LED driver. A detailed theoretical analysis and results of the proposed LED driver are validated on DSP and analog controller platforms with a 62 W/62 V experimental laboratory prototype. The experimental results confirm that the proposed LED driver achieves a power factor of 0.94–0.997, input current THD of maximum 6.8%, output current ripple of 5%, and a peak efficiency of 91.25% for the wide range of input voltage variation. These indices also satisfy IEC‐61000‐3‐2 and IEEE 1789‐2015 standard limits.

A Single-Switch AC–DC LED Driver Based on a Boost-Flyback PFC Converter With Lossless Snubber

An Electrolytic-Capacitorless And Inductorless Ac Direct Led Driver With Power Compensation

A Single-Stage Primary Side Controlled Flyback LED Driver

A primary side controlled single-stage flyback LED driver with high power factor and high accuracy

Research about primary side regulation flyback LED driver

Soft-Switching Single Stage Isolated Ac-Dc Converter for Single-Phase High Power Pfc Applications

A Dimmable and Power-Compensated AC Direct LED Driver with High Efficiency

High input voltage single-stage flyback AC/DC LED driver using series-connected MOSFETs

A Capacitorless and Low‐Optical‐Flicker AC Direct LED Driving IC and System Applied to Street Lighting

A Novel Integrated Electronic Lighting Driver Circuit for Supplying an LED Projection Lamp with High Power Factor and Soft Switching Characteristics

Two-lower-switch PFC converter with active snubber

Single-Stage LED Driver Achieves Electrolytic Capacitor-Less and Flicker-Free Operation With Unidirectional Current Compensator

An Electrolytic Capacitor-Less High Power Factor LED Driver Based on a “One-and-a-Half Stage” Forward-Flyback Topology

A High Power Buck Derived Non-Isolated Ac/Dc Led Driver

A More Efficient PFC Single-Coupled-Inductor Multiple-Output Electrolytic Capacitor-Less LED Driver With Energy-Flow-Path Optimization

An AC-DC LED Integrated Streetlight Driver with Power Factor Correction and Soft-Switching Functions

One Stage Flyback-Type Power Factor Correction Converter for LED Driver

A Capacitor-Isolated Led Driver with Inherent Current Balance Capability

A PFC Single-Coupled-Inductor Multiple-Output LED Driver Without Electrolytic Capacitor

Performance analysis of a bridgeless power factor correction (PFC) buck–boost LED driver with ripple diversion scheme for extended lifespan

A Hybrid LED Driver With Improved Efficiency