Abstract:Electrospinning as a cost-effective process to synthesize nanofiber with controlled morphology and structure has regained attention in the last decade as result of rapid advancements in nanoscale science and engineering and their applications. Although there are a few works demonstrated the ability to fabricate nano gas sensor using electrospun nanofibers as sensing materials, there are limited works to show the optimization of the sensing performance by understanding the electron transport properties and their sensing mechanism. The overall objective of this work is to electrospun conducting polymer/insulating polymer composite nanofibers (i.e., (+)- camphor-10-sulfonic acid (HCSA) doped polyanline PANI (conductive) blended with PEO (non-conductive)) with different compositions (i.e., 12 to 68 wt.%) and apply them as chemiresistive sensing material to detect ammonia at room temperature. The diameter, defects, and morphology of nanofibers were adjusted by controlling solution composition, processing parameters and their effect toward the sensing performance were also investigated. Viscosity of electrospinning solutions was found to have a pronounced impact on fiber diameter and morphology of PANI/PEO nanofibers. Diameters around 350nm of different compositions of PANI/PEO nanofibers were achieved, where decreasing solution viscosity by increasing the PANI content resulted in a morphology changing from individual fibers to junctions. Although all the compositions of PANI/PEO nanofibers show semiconducting behavior and fit a three dimensional variable hopping range model, the activation energy and hopping distance increased as the PANI content decreased. The PANI/PEO nanofibers exhibited excellent sensitivity towards NH3 with fast response and recovery times where a low detection limit of 0.5 ppm with the sensitivity of 5.6 %/ppm of NH3 was achieved from 26 wt.% PANI/PEO nanofibers. Additionally, the PANI/PEO nanofibers response toward water vapor changed from positive to negative indicating the humidity independent ammonia gas sensor can be fabricated by controlling the composition of PANI/PEO nanofibers.

Facile Synthesis of Polyaniline/Carbon-Coated Hollow Indium Oxide Nanofiber Composite with Highly Sensitive Ammonia Gas Sensor at the Room Temperature

The Research and Application of Polyaniline/Multi-Walled Carbon Nanotubes Composite Sensitive Membrane for Ammonia Gas Detection

The Room Temperature Highly Sensitive Ammonia Gas Sensor Based on Polyaniline and Nitrogen-Doped Graphene Quantum Dot-Coated Hollow Indium Oxide Nanofiber Composite

Composites of Fe2O3 Nanosheets with Polyaniline: Preparation, Gas Sensing Properties and Sensing Mechanism

High Performance Gas Sensors Based on In-Situ Fabricated ZnO/polyaniline Nanocomposite: the Effect of Morphology on the Sensing Properties

One Step Synthesis of PANI/Fe2O3 Nanocomposites and Flexible Film for Enhanced NH3 Sensing Performance at Room Temperature.

Room Temperature Ammonia Gas Sensor Based on Polyaniline/copper Ferrite Binary Nanocomposites

Room-Temperature NH<sub>3</sub> Sensors Based on Polyaniline-Assembled Graphitic Carbon Nitride Nanosheets

Electrospun Polyaniline/Poly(ethylene oxide) Composite Nanofibers Based Gas Sensor

In-Situ Self-Assembled Polyaniline/Carbon Nanotubes Nanofiber Thin Films For Ammonia Gas Sensors

Design and preparation of hollow NiO sphere- polyaniline composite for NH3 gas sensing at room temperature

PANI/Ti3C2Tx composite nanofiber-based flexible conductometric sensor for the detection of NH3 at room temperature

Highly sensitive Cu-ethylenediamine/PANI composite sensor for NH3 detection at room temperature

PSS-doped PANI Nanoparticle/ti3c2tx Composites for Conductometric Flexible Ammonia Gas Sensors Operated at Room Temperature

Enhanced Room Temperature Gas Sensor Based on Au-loaded Mesoporous In2O3 Nanospheres@polyaniline Core-Shell Nanohybrid Assembled on Flexible PET Substrate for NH3 Detection

Room-temperature NH3-sensor: SnO2@PANI Core-Shell Hollow Spheres

The Gas Sensor Utilizing Polyaniline/ MoS2 Nanosheets/ SnO2 Nanotubes for the Room Temperature Detection of Ammonia

Nanostructured NiO-polyaniline fibers composite smart material as a room temperature ammonia sensor

Porous Flexible Polyaniline/polyvinylidene Fluoride Composite Film for Trace-Level NH3 Detection at Room Temperature

Room-temperature NH 3 Sensor Based on CoFe 2 O 4 /PANI Composite with Porous Structure

Room Temperature Flexible NH3 Sensor Based on Polyaniline Coated Rh-doped SnO2 Hollow Nanotubes