Abstract:This work focused on the novel symmetrical left-handed split ring resonator metamaterial for terahertz frequency applications. A compact substrate material known as Silicon with a dimension of 5 μm was adopted in this research investigation. Moreover, several parameter studies were investigated, such as clockwise rotation, array and layer structure designs, larger-scale metamaterials, novel design structure comparisons and electric field distribution analysis. Meanwhile, two types of square-shaped metamaterial designs were proposed in this work. The proposed designs exhibit double and single resonance frequencies respectively, likely at 3.32 and 9.24 THz with magnitude values of − 16.43 and − 17.33 for the first design, while the second design exhibits a response at 3.03 THz with a magnitude value of − 19.90. Moreover, the verification of these results by adopting High-frequency Structure Simulator software indicates only slight discrepancies which are less than 5%. Furthermore, the initial response of the proposed designs was successfully altered by simply rotating the design clockwise or even increasing the dimension of the design. For instance, the first resonance frequency is shifted to the lower band when the first proposed design was rotated 90°. On the other hand, by increasing the size of the metamaterial, more than nine resonance frequencies were gained in each symmetric design. Furthermore, the symmetric metamaterial with a similar width and length of 10 μm dimension was adopted for both design structures to construct an equivalent circuit model by utilising Advanced Design System software. Finally, both unit cell designs were utilised to explore the absorption performances which exhibit four and five peak points. Overall, the altering behaviour by changing physical properties and compact design with acceptable responses become one of the novelties of this research investigation. In a nutshell, the proposed designs can be utilised in terahertz frequency which gives optimistic or advantageous feedback and is relatively suitable for the adopted frequency range.

Investigation of electromagnetic response of terahertz metamaterial by using split-disk resonator

The Properties Of Electromagnetic Responses And Optical Modulation In Terahertz Metamaterials

Symmetric left-handed split ring resonator metamaterial design for terahertz frequency applications

Tunable Terahertz Metamaterial with Electromagnetically Induced Transparency Characteristic for Sensing Application

All-Dielectric Terahertz Metamaterial with Polarization Switching Characteristic

Near-Field Spectroscopy of Individual Asymmetric Split-Ring Terahertz Resonators

An Asymmetric Split Ring Resonator For Refractive-Based-Sensor Applications At Terahertz Frequencies

Design of Tunable Terahertz Metamaterial Sensor with Single- and Dual-Resonance Characteristic

THz Near-field spectroscopy of metamaterial resonators

Revealing Near-Field Mode Distribution in Terahertz Asymmetric Split-Ring-resonators

Multiband Terahertz Metamaterials with Double Split-Ring Resonators on Flexible Substrates

Studies on the Resonant Properties in the Asymmetric Dipole-Array Terahertz Metamaterials

THz Polarization Conversion Metamaterial Based on Bianisotropic Response of Split-Ring Resonators

Modulating the Fundamental Inductive-Capacitive Resonance in Asymmetric Double-Split Ring Terahertz Metamaterials

A Three-Dimensional Metamaterial Resonator in Low Terahertz Frequency

Characterization of Metamaterials in the Ambient Environment Using Continuous Wave Terahertz Frequency-Domain Spectroscopy

Assembling Terahertz Metamaterials by Using a Split Ring Resonator with a Metal Mesh

Polarization Conversion in Terahertz Planar Metamaterial Composed of Split-Ring Resonators

Tunable Split Ring Resonators in Terahertz Band?

Hybrid Terahertz Metamaterial Structure Formed by Assembling a Split Ring Resonator with a Metal Mesh

Design and Analysis of Metamaterial Absorber using Split Ring Resonator for Dual Band Terahertz Applications