Abstract:This work focused on the novel symmetrical left-handed split ring resonator metamaterial for terahertz frequency applications. A compact substrate material known as Silicon with a dimension of 5 μm was adopted in this research investigation. Moreover, several parameter studies were investigated, such as clockwise rotation, array and layer structure designs, larger-scale metamaterials, novel design structure comparisons and electric field distribution analysis. Meanwhile, two types of square-shaped metamaterial designs were proposed in this work. The proposed designs exhibit double and single resonance frequencies respectively, likely at 3.32 and 9.24 THz with magnitude values of − 16.43 and − 17.33 for the first design, while the second design exhibits a response at 3.03 THz with a magnitude value of − 19.90. Moreover, the verification of these results by adopting High-frequency Structure Simulator software indicates only slight discrepancies which are less than 5%. Furthermore, the initial response of the proposed designs was successfully altered by simply rotating the design clockwise or even increasing the dimension of the design. For instance, the first resonance frequency is shifted to the lower band when the first proposed design was rotated 90°. On the other hand, by increasing the size of the metamaterial, more than nine resonance frequencies were gained in each symmetric design. Furthermore, the symmetric metamaterial with a similar width and length of 10 μm dimension was adopted for both design structures to construct an equivalent circuit model by utilising Advanced Design System software. Finally, both unit cell designs were utilised to explore the absorption performances which exhibit four and five peak points. Overall, the altering behaviour by changing physical properties and compact design with acceptable responses become one of the novelties of this research investigation. In a nutshell, the proposed designs can be utilised in terahertz frequency which gives optimistic or advantageous feedback and is relatively suitable for the adopted frequency range.

Design and Analysis of Metamaterial Absorber using Split Ring Resonator for Dual Band Terahertz Applications

Dual-band terahertz absorber based on square ring metamaterial structure

Terahertz metamaterial absorber using asymmetric resonator

Asymmetric Three-Dimensional Metamaterial Absorber for Microwave Application

A metamaterial absorber for the terahertz regime: design, fabrication and characterization

Symmetric left-handed split ring resonator metamaterial design for terahertz frequency applications

Theoretical simulation of a dual-band and dual-broadband terahertz metamaterial absorber using two asymmetric rectangular rings

Design Of A Polarization-Insensitive Wideband Tunable Metamaterial Absorber Based On Split Semi-Circle Ring Resonators

Dual‐Band Terahertz Metamaterial Absorber Based on LC Resonance and Dipolar Response and Its Applications

Broadband Terahertz Metamaterial Absorber Based on Simple Multi-Ring Structures

Broadband Terahertz Metamaterial Absorber Based on Asymmetric Resonators with Perfect Absorption

A wideband, thin, dual-negative, and polarization-independent square-tooth circular ring resonator-based metamaterial absorber for Ku-band applications

Triple band terahertz metamaterial absorber within (0.4-0.46thz) frequency range

A Broadband Metamaterial Absorber Design Using Characteristic Modes Analysis

Planar Broadband and High Absorption Metamaterial Using Single Nested Resonator at Terahertz Frequencies.

New Type Design of the Triple-Band and Five-Band Metamaterial Absorbers at Terahertz Frequency

Comment on Lu et al. Ultrathin Terahertz Dual-Band Perfect Metamaterial Absorber Using Asymmetric Double-Split Rings Resonator. Symmetry 2018, 10, 293

Extending the bandwidth of electric ring resonator metamaterial absorber

Dualband and Tripleband Metamaterial absorber in WR1 band and Lower TeraHertz frequencies

Bandwidth Enhanced Metamaterial Absorber at Terahertz Frequency

Design and development of high-performance metamaterial absorber for moisture-sensing application