Abstract:This work focused on the novel symmetrical left-handed split ring resonator metamaterial for terahertz frequency applications. A compact substrate material known as Silicon with a dimension of 5 μm was adopted in this research investigation. Moreover, several parameter studies were investigated, such as clockwise rotation, array and layer structure designs, larger-scale metamaterials, novel design structure comparisons and electric field distribution analysis. Meanwhile, two types of square-shaped metamaterial designs were proposed in this work. The proposed designs exhibit double and single resonance frequencies respectively, likely at 3.32 and 9.24 THz with magnitude values of − 16.43 and − 17.33 for the first design, while the second design exhibits a response at 3.03 THz with a magnitude value of − 19.90. Moreover, the verification of these results by adopting High-frequency Structure Simulator software indicates only slight discrepancies which are less than 5%. Furthermore, the initial response of the proposed designs was successfully altered by simply rotating the design clockwise or even increasing the dimension of the design. For instance, the first resonance frequency is shifted to the lower band when the first proposed design was rotated 90°. On the other hand, by increasing the size of the metamaterial, more than nine resonance frequencies were gained in each symmetric design. Furthermore, the symmetric metamaterial with a similar width and length of 10 μm dimension was adopted for both design structures to construct an equivalent circuit model by utilising Advanced Design System software. Finally, both unit cell designs were utilised to explore the absorption performances which exhibit four and five peak points. Overall, the altering behaviour by changing physical properties and compact design with acceptable responses become one of the novelties of this research investigation. In a nutshell, the proposed designs can be utilised in terahertz frequency which gives optimistic or advantageous feedback and is relatively suitable for the adopted frequency range.

An Asymmetric Split Ring Resonator For Refractive-Based-Sensor Applications At Terahertz Frequencies

Stretchable and tunable quartered split-ring resonator (QSRR) using terahertz metamaterial

Design of Tunable Terahertz Metamaterial Sensor with Single- and Dual-Resonance Characteristic

Near-Field Spectroscopy of Individual Asymmetric Split-Ring Terahertz Resonators

Symmetric left-handed split ring resonator metamaterial design for terahertz frequency applications

Asymmetric planar terahertz metamaterials

Dual-band terahertz metamaterials with electromagnetically induced transparency-like enabling high-performance sensing

Tunable Terahertz Metamaterial with Electromagnetically Induced Transparency Characteristic for Sensing Application

Characterization of Metamaterials in the Ambient Environment Using Continuous Wave Terahertz Frequency-Domain Spectroscopy

Terahertz metamaterial absorber using asymmetric resonator

A Hybrid Terahertz Metamaterial Sensor Using a Hexagonal Ring Resonator with Bio-medical Applications

Dual-Resonance Split Ring Resonator Metasurface for Terahertz Biosensing

Novel High Performance Fano Resonance Sensor with Circular Split Ring Resonance

Tunable Fano Resonance and Enhanced Sensing in Terahertz Metamaterial

A High-Performance Refractive Index Sensor Based on Fano Resonance in Si Split-Ring Metasurface

Investigation of electromagnetic response of terahertz metamaterial by using split-disk resonator

Solid materials characterization using split ring resonators enclosed by power divider

Terahertz Electromagnetic Signal Enhancement in Split Ring Resonators Featuring Waveguide Modes.

Fano resonance and sensing application based on terahertz asymmetric split-ring metasurfaces

Dual-band detection based on metamaterial sensor at terahertz frequency

High-Q factor terahertz metamaterial sensor based on quasi-BIC