Abstract:The mechanical behaviors of the interface between coarse-grained soil and concrete were investigated by simple shear tests under condition of mixed soil slurry (bentonite mixed with cement grout). For comparison, the interfaces both without slurry and with bentonite slurry were analyzed. The experimental results show that different slurries exert much influence on the strength and deformation of soil/structure interface. Under mixed soil slurry, strain softening and shear dilatation are observed, while shear dilatation appears under the small normal stress of the interface without slurry, and shear contraction is significant under the condition of the bentonite slurry. The thickness of the interface was determined by analyzing the disturbed height of the sample with both simple shear test and particle flow code (PFC). An elasto-plastic constitutive model incorporating strain softening and dilatancy for thin layer element of interface was formulated in the framework of generalized potential theory. The relation curves of shear stress and shear strain, as well as the relation curves of normal strain and shear strain, were fitted by a piecewise function composed by hyperbolic functions and resembling normal functions. The entire model parameters can be identified by tests. The new model is verified by comparing the measured data of indoor cut-off wall model tests with the predictions from finite element method (FEM). The FEM results indicate that the stress of wall calculated by using Goodman element is too large, and the maximum deviation between the test data and prediction is about 45%. While the prediction from the proposed model is close to the measured data, and the error is generally less than 10%.

Novel approach to apply existing constitutive soil models to the modelling of interfaces

J2-deformation-type Soil Model Coupled with State-Dependent Dilatancy and Fabric Evolution: Multiaxial Formulation and FEM Implementation

A Hypoplastic Model for Granular Soils Incorporating Anisotropic Critical State Theory

Constitutive modeling of soil-structure interface through the concept of critical state soil mechanics

SOFTENING/HARDENING CONSTITUTIVE MODEL FOR SOIL-STRUCTURE INTERFACE AND NUMERICAL IMPLEMENTATION

Shear characteristics of interface based on subloading-friction model

Simulation of Soil‐Concrete Interfaces with Nonlocal Constitutive Models

A poroelastic model for the effective behavior of granular materials with interface effect

An Elasto-Plastic Constitutive Model Incorporating Strain Softening and Dilatancy for Interface Thin-Layer Element and Its Verification

A critical state three-dimensional multi-shear model for soil-structure interfaces under monotonic and cyclic loading

An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations

A thermo-mechanical model for saturated and unsaturated soil-structure interfaces

A Two‐mechanism Soil–structure Interface Model for Three‐dimensional Cyclic Loading

A three-dimensional state-dependent model of soil–structure interface for monotonic and cyclic loadings

Testing and Modeling of Soil-Structure Interface

Interfacial Cohesive Zone Model and Progressive Failure of Soil-Structure Interface

Numerical Simulation of Interface Failure During Direct Shear Tests

A bounding surface model for saturated and unsaturated soil‐structure interfaces

Three-dimensional Model of Interface Between Structure and Coarse Grained Soil

A Three-Dimensional Multishear Bounding Surface Model of Granular Soil–Structure Interfaces under Monotonic and Cyclic Loading

Numerical modelling of expansive geomaterials: Finite element formulation and constitutive models