Abstract:SummaryA three‐dimensional (3D) soil–structure interface model is proposed within the two‐mechanism constitutive theory and bounding surface theory originally established for soils. The proposed model has two main characteristics: first, the model is formulated based on two different and superposed deformation mechanisms. The first mechanism is due to the stress ratio increment, and the second is due to the normal stress increment. Each mechanism induces a shear strain component and a normal strain component. The proposed model can be reduced to the conventional single‐mechanism interface model. Second, the plastic modulus and stress dilatancy are defined using the bounding surface theory. The plastic flow rule under cyclic loading is modified and assumed to be dependent on both the stress state of the mapping point and the stress reversal loading direction. The proposed model was validated against the available 3D interface tests and was found to satisfactorily reflect the salient features of the interfaces under monotonic and cyclic loading paths with different normal boundaries. The problem in which the elastic normal stiffness in conventional single‐mechanism interface models is often underestimated to enhance the simulation performance under varying normal stress conditions is solved by incorporating the second mechanism. And the effect of the second mechanism on the modeling behavior is discussed. The modified plastic flow direction accurately simulates the 3D cyclic shear response, and the difference between the model simulation and test result increases with the number of cycles by use of the plastic flow direction defined in conventional bounding surface theory.

Three-dimensional Model of Interface Between Structure and Coarse Grained Soil

A critical state three-dimensional multi-shear model for soil-structure interfaces under monotonic and cyclic loading

Unified Modeling of Soil-Structure Interface and Its Test Confirmation

Three-dimensional elasto-plastic damage model for gravelly soil-structure interface considering the shear coupling effect

Testing and Modeling of Soil-Structure Interface

Shear characteristics of interface based on subloading-friction model

Shear Characteristics of Structure Interface and Its Strain-Softening and Hardening Damage Model

A three-dimensional state-dependent model of soil–structure interface for monotonic and cyclic loadings

Soil-structure Interface Modeling of Pile-Soil Interaction with an Elasto-Plasticity Damage Model

Interfacial Cohesive Zone Model and Progressive Failure of Soil-Structure Interface

Constitutive modeling of soil-structure interface through the concept of critical state soil mechanics

Numerical Simulation of Interface Failure During Direct Shear Tests

SOFTENING/HARDENING CONSTITUTIVE MODEL FOR SOIL-STRUCTURE INTERFACE AND NUMERICAL IMPLEMENTATION

Unified Modeling of Monotonic and Cyclic Behavior of Interface Between Structure and Gravelly Soil

A Three-Dimensional Multishear Bounding Surface Model of Granular Soil–Structure Interfaces under Monotonic and Cyclic Loading

A Two‐mechanism Soil–structure Interface Model for Three‐dimensional Cyclic Loading

Discrete Element Modeling of Soil-Structure Interface Behavior under Cyclic Loading

ELASTOPLASTIC DAMAGE MODEL OF SOIL-STRUCTURE INTERFACE IN SINGLE PILE-SOIL INTERACTION ANALYSIS

Simple Shear Test And Numerical Simulation Of Interfaces Between Granular Materials

Study on Shear Damage Model for Soil-structure Interface Based on Weibull Distribution

Test Study on Behavior of Interface Between Structure and Coarse Grained