Abstract:Polylactic acid (PLA) composites parts obtained by fused deposition modeling (FDM) three-dimensional (3D) printing have obvious fusion interfaces. The printed parts have low strength and poor plastic toughness, limiting their application in clinical degradable load-bearing implants. In this article, first, the nano-hydroxyapatite (n-HA) was modified by PLA to obtain a core-shell structure with PLA coating. The micron chopped carbon fiber (CF) was modified by nitric acid to obtain a rich oxygen-containing functional group structure. Second, the above two modified materials of n-HA and CF were coated on the surface of the PLA filament by ultrasonic impregnation to obtain the PLA/n-HA/CF composite filament. Finally, tensile samples were manufactured by FDM 3D printing with the PLA/n-HA/CF composite filament, and the tensile test was conducted. The results show that the surface-modified n-HA particles form a regular spherical core-shell structure with good dispersibility. It can be combined with a matrix of PLA filament by the PLA coating layer, while a silane coupling agent combines the PLA coating layer and the core of n-HA. The modified chopped CF treated with 68% nitric acid for 6 h has an ideal etch pits with moderate depth and distribution producing firm combination with the PLA matrix. The surface of modified chopped CF has abundant -COOH and -OH functional groups. It can be combined with a matrix of PLA filament through an esterification reaction. Among all the tensile samples, PLA_5% n-HA_6% CF, with 5% modified n-HA and 6% modified chopped CF, respectively, improves the bonding strength between the fused interfaces with the two reinforcement materials well-distributed in the fuse interface area.

Modification of halloysite filler with phosphonium based deep eutectic solvents for PLA/HNTs composites

Surface modification of bamboo-char and its reinforcement in PLA biocomposites

Preparation and characterization of organic modified montmorillonite/polylactic acid nanocomposites

Surface Modification Of Halloysite Nanotubes With L-Lactic Acid: An Effective Route To High-Performance Poly(L-Lactide) Composites

Halloysite nanotubes (HNT) as reinforcement for compatibilized blends of polypropylene (PP) and polylactic acid (PLA)

An experimental study on the microstructural, tensile, and fracture properties of biodegradable polylactic acid blended with thermoplastic corn starch filled with halloysite nanotubes

The Effect of Silanized Halloysite Nanotubes on the Structure of Polyethylene-Based Composite

Physical and Barrier Properties of Polylactic Acid/Halloysite Nanotubes-Titanium Dioxide Nanocomposites

Tailoring the mechanical and thermal properties of polylactic acid-based bionanocomposite films using halloysite nanotubes and polyethylene glycol by solvent casting process

Comparison of Precipitated Calcium Carbonate/Polylactic Acid and Halloysite/Polylactic Acid Nanocomposites

Investigation of γ-Aminopropyltriethoxysilane (APTES)-Modified Halloysite Nanotubes on the Reinforcement of Halloysite/Polypropylene (PP) Nanocomposites

The synergistic reinforcing effects of halloysite nanotube particles and polyolefin elastomer-grafted-maleic anhydride compatibilizer on melt and solid viscoelastic properties of polylactic acid/ polyolefin elastomer blends

Recent advance in research on halloysite nanotubes-polymer nanocomposite

Fabrication and characterization of organically modified layered double hydroxide/poly (lactic acid) nanocomposite by sonication-assisted solution compounding method

Synergic Effect of HNT/oMMT Bi-filler System for the Mechanical Enhancement of PLA/PBAT Film

Preparation and characterization of poly (lactic acid) (PLA)/polyamide 6 (PA6)/graphene nanoplatelet (GNP) blends bio-based nanocomposites

A Surface Modification of Polylactic Acid Composites for Additive Manufacturing with Modified Chopped Carbon Fiber and Modified Nano‐hydroxyapatite

Contribution of silane modification of halloysite nanotube to its poly (butylene terephthalate)-based nanocomposites: structural, mechanical and thermal properties

Enhanced Mechanical, Thermal and Electrical Properties of Additively Manufactured Polylactic Acid/Carbon Nanotube Polymer Nanocomposites

Morphology, Rheology and Crystallization Behavior of Polylactide Composites Prepared Through Addition of Five-Armed Star Polylactide Grafted Multiwalled Carbon Nanotubes

Enhanced properties of poly(lactic acid) by concurrent addition of organo-modified Mg-Al layered double hydroxide (LDH) and triethyl citrate