Abstract:Polyurethane incorporated with nanofillers such as carbon nanotubes, basalt fibers, and clay nanoparticles has presented remarkable potential for improving the performance of the polymeric composites. In this study, the halloysite nanofiller-reinforced polyurethane elastomer composites were prepared via the semi-prepolymer method. The impact of different halloysites (halloysite nanotubes and halloysite nanoplates) in polyurethane composites was investigated. Scanning electron microscopy, X-ray diffraction, infrared spectroscopy, electronic universal tensile testing, and acoustic impedance tube testing were employed to characterize the morphology, composition, phase separation, mechanical properties, and sound insulation of the samples. The composite fabricated with 0.5 wt% of halloysite nanotubes introduced during quasi-prepolymer preparation exhibited the highest tensile strength (22.92 ± 0.84 MPa) and elongation at break (576.67 ± 17.99%) among all the prepared samples. Also, the incorporation of 2 wt% halloysite nanotubes into the polyurethane matrix resulted in the most significant overall improvements, particularly in terms of tensile strength (~44%), elongation at break (~40%), and sound insulation (~25%) within the low-frequency range of 50 to 1600 Hz. The attainment of these impressive mechanical and acoustic characteristics could be attributed to the unique lumen structure of the halloysite nanotubes, good dispersion of the halloysites in the polyurethane, and the interfacial bonding between the matrix and halloysite fillers.

Investigation of γ-Aminopropyltriethoxysilane (APTES)-Modified Halloysite Nanotubes on the Reinforcement of Halloysite/Polypropylene (PP) Nanocomposites

Surface Modification of Halloysite/Sericite

The Effect of Silanized Halloysite Nanotubes on the Structure of Polyethylene-Based Composite

Morphology And Properties Of Halloysite Nanotubes Reinforced Polypropylene Nanocomposites

The Role of Halloy Site on Crystallinity, Ion Conductivity, Thermal and Mechanical Properties of Poly(ethylene-Oxide)/halloysite Nanocomposites

Study on Strengthening Recycled Polyethylene by Halloysite Nanotubes/Silica

Modification of Poly(propylene carbonate) by Halloysite Nanotubes

Effect of Silica on Structure and Property of PP/Halloysite Nano-tube Composite

Influence of APTES Modified HNTs on Properties of NR/EPDM Nanocomposites

Improvement of Mechanical and Acoustic Characteristics of Halloysite Nanotube-Reinforced Polyurethane Elastomer Composites and Their Applications

Preparation of Viscoelastic Gel‐like Halloysite Hybrids and Their Application in Halloysite/polystyrene Composites

Polymer-modified halloysite composite nanotubes

Surface Modification of Shell Waste and Its Application in Polypropylene Composites

Contribution of silane modification of halloysite nanotube to its poly (butylene terephthalate)-based nanocomposites: structural, mechanical and thermal properties

Effects of halloysite nanotubes modified by organic phosphate on the performance improvement for polypropylene

Modification of halloysite filler with phosphonium based deep eutectic solvents for PLA/HNTs composites

Tailoring the Wettability of Polypropylene Surfaces with Halloysite Nanotubes

Effects of Unfolded and Intercalated Halloysites on Mechanical Properties of Halloysite–epoxy Nanocomposites

Preparation and Enhanced Properties of Poly(propylene)/ Silica‐grafted‐hyperbranched Polyester Nanocomposites

Chemical modification of carbon fiber with diethylenetriaminepentaacetic acid/halloysite nanotube as a multifunctional interfacial reinforcement for silicone resin composites

Surface Modification Of Halloysite Nanotubes With L-Lactic Acid: An Effective Route To High-Performance Poly(L-Lactide) Composites