Abstract:The user demands for Lithium ion batteries in mobile applications and electric vehicles request steady improvement in terms of capacity and cycle life. State-of-the-art lithium ion batteries irreversibly loose about 10 % of the capacity during the first cycles due to SEI formation. Therefore, 10 % of the cathode material is not used during the rest of the cells life which results in a waste of cathode material and leads to a lowered range of battery electric vehicles. Therefore, these losses must be compensated to ensure efficient resource utilization and to further increase the capacity of the lithium ion battery. We have developed a method to compensate these capacity losses by pre-lithiation: A fast and simple approach of electrolyte-free direct contact pre-lithiation leads to targeted degrees of pre-lithiation in a range of 7-50 % for state-of-the-art graphite electrodes. The parameters pressure (0-40 MPa), temperature (20-150°C) and time (0-60 min) are used to transfer lithium from a temporary substrate to the graphite anode. This process uses 1-5 μm thin lithium films made by the Fraunhofer IWS lithium melt deposition process as a lithium source. [1] The degree of pre-lithiation can be controlled by the lithium loading of the temporary substrate. NCM full cells built with pre-lithiated graphite electrodes where electrochemically evaluated in comparison to unlithiated electrodes. They show 6.5 % capacity increase after the first cycles using the additional lithium to form the SEI during the first cycles. The parameter influence of the pre-lithiation process on the initial coulomb efficiency of cells with pre-lithiated graphite electrodes is examined in half cells showing an ICE of 99.91 % for the best parameters. This method of electrolyte-free direct contact pre-lithiation shows an efficient way to further increase the capacity of state-of-the-art LIBs with graphite electrodes by increasing the cathode material utilization. It can potentially be scaled up to a roll-to-roll process using a heated calender nip. The temporary substrates with tailored lithium loading can be processed by lithium melt deposition in an efficient way with high lithium yield and high precision. [1] K. Schönherr, B. Schumm, F. Hippauf, R. Lissy, H. Althues, C. Leyens, S. Kaskel, Chemical Engineering Journal Advances 2022 , 9 , 100218. Figure 1

Study on Prelithiation Technology of Hard Carbon Electrode Using Stable Metal Lithium Powder

Surface Coating Engineering of Prelithiation Cathode Additives for Lithium-Ion Batteries

Molecularly chemical prelithiation of soft carbon towards high-performance lithium-ion capacitors

Elucidating the Chemical Pre‐Lithiation Mechanism of Hard Carbon Anodes for Ultra‐high Stability Lithium‐Ion Batteries

Non-destructive Chemical Prelithiation of VO2(B) Anodes Constructing a Multifunctional Interphase Layer for Advanced Li-Ion Batteries

High-capacity battery cathode prelithiation to offset initial lithium loss

Activated nanolithia as an effective prelithiation additive for lithium-ion batteries

A Scalable and Controllable Li‐powder‐coating Pre‐lithiation Method toward Ultra‐long‐life and High‐energy‐density LiFePO4 Battery

Feasibility of Prelithiation in LiFePO4

Practical Prelithiation of 4.5 V LiCoO 2 ||Graphite Batteries by a Passivated Lithium‐Carbon Composite

Chemically Prelithiated Hard-Carbon Anode for High Power and High Capacity Li-Ion Batteries.

Study on Li Metal Deposition, SEI Formation on Anodes and Cathode Potential Change during the Pre-Lithiation Process in a Cell Prepared with Laminated Porous Anodes and Cathodes

Hard carbon/graphite composite anode for durable lithium-ion capacitor

LiF/Fe composite for Ni-rich cathode prelithiation: Synthesis, bilayer structured electrode and lithium loss compensation

Lithiophilic Chemistry Facilitated Ultrathin Lithium for Scalable Prelithiation

Tailored Pre-Lithiation Using Melt-Deposited Lithium Thin Films

Tailored Pre-Lithiation of Carbon Anodes Using Melt Deposited Thin Lithium

Prelithiation of silicon-carbon nanotube anodes for lithium ion batteries by stabilized lithium metal powder (SLMP)

A Novel Efficient Three-stage Electrochemical Pre-lithiation method for the Amorphous Carbon Negative Electrodes of Lithium-ion Capacitors

Boosting the capability of Li2C2O4 as cathode pre-lithiation additive for lithium-ion batteries

Hard Carbon/lithium Composite Anode Materials for Li-ion Batteries