Abstract:To avoid interference from unexpected background noises and obtain high fidelity voice signal, acoustic sensors with high sensitivity, flat frequency response, and high signal-to-noise ratio (SNR) are urgently needed for voice recognition. Graphene-oxide (GO) has received extensive attention due to its advantages of controllable thickness and high fracture strength. However, low mechanical sensitivity (S M ) introduced by undesirable initial stress limits the performance of GO material in the field of voice recognition. To alleviate the aforementioned issue, GO diaphragm with annular corrugations is proposed. By means of the reusable copper mold machined by picosecond laser, the fabrication and transfer of corrugated GO diaphragm are realized, thus achieving a Fabry–Perot (F–P) acoustic sensor. Benefitting from the structural advantage of the corrugated GO diaphragm, our F–P acoustic sensor exhibits high S M (43.70 nm/Pa@17 kHz), flat frequency response (−3.2 to 3.7 dB within 300–3500 Hz), and high SNR (76.66 dB@1 kHz). In addition, further acoustic measurements also demonstrate other merits, including an excellent frequency detection resolution (0.01 Hz) and high time stability (output relative variation less than 6.7% for 90 min). Given the merits presented before, the fabricated F–P acoustic sensor with corrugated GO diaphragm can serve as a high-fidelity platform for acoustic detection and voice recognition. In conjunction with the deep residual learning framework, high recognition accuracy of 98.4% is achieved by training and testing the data recorded by the fabricated F–P acoustic sensor.

Miniature Fiber Laser Microphones with Graphene Diaphragms

Graphene-clad Microfibre Saturable Absorber for Ultrafast Fibre Lasers.

Fabrication of high-Q microresonators in dielectric materials using a femtosecond laser: Principle and applications

Low-threshold Whispering-Gallery-mode Microlasers Fabricated in a Nd:glass Substrate by Three-Dimensional Femtosecond Laser Micromachining.

A Highly Sensitive Fiber-Optic Microphone Based on Graphene Oxide Membrane

Graphene Q-switched Distributed Feedback Fiber Lasers with Narrow Linewidth Approaching the Transform Limit

Super-sensitive Graphene Nano-Fabric Drum at the Macroscale

High-fidelity optical fiber microphone based on graphene oxide and Au nanocoating

Ultra-high sensitivity fiber optic microphone with corrugated graphene-oxide diaphragm for voice recognition

Noise Canceled Graphene-Microcavity Fiber Laser Sensor for Ultrasensitive Gas Detection

A Fiber Laser Using Graphene-Integrated 3-D Microfiber Coil

Fusion Spliced Microfiber Closed-Loop Resonators

Flexible Graphene Sound Device Based On Laser Reduced Graphene

A Miniature Fiber-Optic Microphone Based on an Annular Corrugated MEMS Diaphragm

Laser Direct Writing of Graphene Nanostructures Beyond the Diffraction Limit by Graphene Oxidation

Miniature Fabry-Perot Cavity Based on Fiber Bragg Gratings Fabricated by Fs Laser Micromachining Technique

Fiber-Optic Acoustic Sensor Based on Multi-Layered Graphene Material

Mini-review: Novel Graphene-based Acoustic Devices

A Monolithic Graphene Functionalized Microlaser for Multispecies Gas Detection

Optically Assisted FM Demodulation of a Graphene Resonator

A miniature fiber-optic microphone based on plano-concave micro-interferometer