Abstract:A series of nitrogen-doped carbons were prepared by using biomass waste sawdust as carbon source for supercapacitors. A new nitrogen-doping strategy was proposed to introduce nitrogen element into carbons by using ethylenediamine and carbon as nitrogen source through the polymerization reaction on sawdust under moderate conditions. The raw carbons were further activated with KOH to improve the surface area to increase the electric double layer capacitance while the heteroatoms can improve the pseudocapacitance. The prepared carbons were characterized with different techniques and the electrochemical performances were tested. It was found that the nitrogen-doped carbons activated with a KOH to carbon mass ratio of 5 (NC600-800-5) has the largest specific surface area (1674 m(2)g(-1)) and moderate nitrogen content (2.88 wt%). Compared with the carbon without introduction of nitrogen element (C600-800-5), the capacitive performances of nitrogen-doped carbons were greatly improved, which may be due to the increase of pseudocapacitance and the improvement of wettability introduced by nitrogen element. The largest specific capacitance, 367 F g(-1), was reached at 0.5 A g(-1 )in 6 M KOH solution while the specific capacitance of C600-800-5 is only 279 F g(-1). After 10,000 cycles at 3 A g(-1), the specific capacitance can keep 96.7% of the initial value, suggesting the excellent cycling performance. The energy density can reach 8.7 Wh Kg(-1) at a power density of 251.6 W kg(-1). Thus, it is proved that the nitrogendoping strategy is effective and the introduction of nitrogen element to carbons is particularly important to the improvement of the electrochemical performances.

Porous nitrogen and oxygen co-doped carbon microtubes derived from plane tree fruit fluff for high-performance supercapacitors

Highly N/O co-doped ultramicroporous carbons derived from nonporous metal-organic framework for high performance supercapacitors

Hydrangea-like N/O codoped porous carbons for high-energy supercapacitors

Green Fabrication of Hierarchically Porous Carbon Microtubes from Biomass Waste Via Self-Activation for High-Energy-density Supercapacitor

Green synthesis of porous carbon for supercapacitors from pine cone/phoenix tree fruit fluff by hydrothermal pre-activation method

Porous carbons derived from potato for high-performancesupercapacitors

Biobased Nano Porous Active Carbon Fibers for High-Performance Supercapacitors

Sulfur-doped carbon nanotubes with hierarchical micro/mesopores for high performance pseudocapacitive supercapacitors

N-Doped Porous Carbons with High Surface Areas Prepared Through One-Step Chemical Activation and Their Application for Supercapacitors

Heteroatoms co-doped multi-level porous carbon as electrode material for supercapacitors with ultra-long cycle life and high energy density

Nitrogen-doped porous carbon derived from biomass waste for high-performance supercapacitor

Synergistic effect of porous structure and heteroatoms in carbon materials to boost high‐performance supercapacitor

Polyatomic self-doping millet-derived porous carbon for supercapacitor

Biomass derived N/O self-doped porous carbon for advanced supercapacitor electrodes

Biomass-derived nitrogen and sulfur co-doped sheet-like porous carbon for high-performance supercapacitors

Porous Carbon with Willow-Leaf-Shaped Pores for High-Performance Supercapacitors.

Nitrogen and Phosphorus Co-doped Porous Carbon for High-Performance Supercapacitors

Porous bamboo‐like CNTs prepared by a simple and low‐cost steam activation for supercapacitors

N-doped Carbons with Hierarchically Micro- and Mesoporous Structure Derived from Sawdust for High Performance Supercapacitors

Nitrogen-Doped Hierarchical Porous Carbon Nanowhisker Ensembles on Carbon Nanofiber for High-Performance Supercapacitors

High-performance supercapacitors prepared on the base of nitrogen-doped tubular porous carbon from polypyrrole coated Juncus effusus