Abstract:It was experimentally found that silica and gold particles can modify the combustion properties of nanothermites but the exact role of the thermal properties of these additives on the propagating combustion front relative to other potential contributions remains unknown. Gold and silica particles of different sizes and volume loadings were added into aluminum/copper oxide thermites. Their effects on the flame front dynamics were investigated experimentally using microscopic dynamic imaging techniques and theoretically via a reaction model coupling mass and heat diffusion processes. A detailed theoretical analysis of the local temperature and thermal gradients at the vicinity of these two additives shows that highly conductive inclusions do not accelerate the combustion front while poor conductive inclusions result in the distortion of the flame front (corrugation), and therefore produce high thermal gradients (up to 1010K.m-1) at the inclusion/host material interface. This results in an overall slowing down of the combustion front. These theoretical findings contradict the experimental observations in which a net increase of the flame front velocity was found when Au and SiO2particles are added into the thermite. This leads to the conclusion that the faster burn rate observed experimentally cannot be fully associated with thermal effects only, but rather on chemical (catalytic) and/or mechanical mechanisms: formation of highly-stressed zones around the inclusion promoting the reactant mixing. One additional experiment in which physical SiO2particles were replaced by voids (filled with Ar during experiment) to cancel the potential mechanical effects while preserving the thermal inhomogeneity in the thermite structure confirms the hypothesis that instead of pure thermal conduction, it is the mechanical mechanisms that dominate the propagation velocity in our specific Al/CuO multilayered films.

Self-propagating high-temperature synthesis in a thin-layer CuO–B–glass system

Self-Propagating High-Temperature Synthesis of a Thin-Layer CuO–B–Glass System

Self-Propagating High Temperature Synthesis in Two-Layer (Ni + Al)/(PbO2 + B + Al2O3 + Glass) Powder Mixtures

Simulation of an Electrothermal Explosion of a Gas-Free System. Effect of Conductive Heat Exchange and Joule Heating Power

Synthesis of high-oxidation Y-Ba-Cu-O phases in superoxygenated thin films

Elucidation of the crystallization behavior and the thermodynamics property of CuO/Bi12SiO20@ SiO2-B2O3-Bi2O3-CuO glass-ceramics

Self-Propagating High-Temperature Synthesis of the Heterophase Materials in the Zr–Mo–Si–B System: Kinetics and Mechanisms of Combustion and Structure Formation

Self-propagating waves of crystallization in metallic glasses

Self-Propagating High-Temperature Synthesis of Layered Composite Ti/Hf/Ta/Ni/Ceramics Materials

Thermodynamical calculation of metal heating in nanosecond exploding wire and foil experiments

Self‐Propagating High‐Temperature Synthesis Flammable Range and Dominant Parameters for Synthesizing Several Ceramics and Intermetallic Compounds under Heat‐Loss Condition

Compositionally graded multi-principal-element alloy coating with hybrid amorphous-nanocrystalline structure by directional electrical explosion

Breakdown dynamics and instability of underwater metallic aerosol bubble atomized by electrical explosion

MULTILAYER TUNGSTEN/QUASI-CRYSTAL Ti-Zr-Ni SYSTEMS AS PROMISING MATERIALS OF PROTECTIVE ELEMENTS A FUSION REACTOR

Molecular dynamics simulation of explosive boiling of the H2O-Cu nanofluid

Enhanced Capillary‐Fed Boiling in Copper Inverse Opals via Template Sintering

Visualization Analysis of the Results of Continuum-Atomistic Modeling of a Coulomb Explosion in Metals Under the Influence of Ultrashort (fs, ps) Laser Action

Elucidating the dominant mechanisms in burn rate increase of thermite nanolaminates incorporating nanoparticle inclusions

Physicochemical Fundamentals of the Synthesis of a Cu@BN Composite Consisting of Nanosized Copper Enclosed in a Boron Nitride Matrix

Kinetics and numerical simulation of self-propagating high-temperature synthesis in Ti–Cr–Al–C systems

Understanding High-Temperature Chemical Reactions on Metal Surfaces: A Case Study on Equilibrium Concentration and Diffusivity of CxHy on a Cu(111) Surface