Abstract:Photonic crystal (PhC) cavities have drawn plenty of attentions during the past several decades for the advantages of ultra-high Q factor and small mode volume. PhC cavities have various applications such as quantum information processing, low threshold lasers, optomechanics, and nonlinear optics. PhC cavities based on silicon material have been heavily investigated due to their compatibility with complementary metal-oxide-semiconductor (CMOS) technology, small feature size and low cost. However, apart from the advantage of high Q factor, silicon based PhC cavities suffer from the drawbacks of high insertion loss because of the mode mismatch with fiber and relatively low sensitivity especially for the sensing application. On the other hand, silicon dioxide (silica) waveguide experience relatively smaller loss and owns a similar refractive index to numerous liquid materials to be detected, which will leads to high sensitivity for a silica based PhC cavity sensor. In this paper, we propose a high Q factor (Q = 15500) silica based PhC nanobeam cavity with high sensitivity (the wavelength shift per refractive index unit (RIU) is S = 338 nm/RIU) at the telecommunication wavelength (1550 nm). Since the refractive index contrast for silica waveguide is low for the realization of the photonic bandgaps, it is essential to utilize a silica waveguide suspended in free space. The PhC nanobeam cavity is then formed by etching a series of elliptical holes, whose dimensions linearly decrease from the center to both ends, directly into the silica waveguide. For the sake of high transmission on-resonance wavelength while maintaining high Q factor, it's important to etch partly into the waveguide, which results in a low-refractive-index perturbation structure. The calculated on-resonance transmission is about 0.26. The novel proposed PhC nanobeam cavity shows a sensitivity 3 times larger than the one based on silicon counterparts and outperforms other low index-contrast PhC cavities by a higher on-resonance transmission. Such a structure can also be used in spectrally filtering system and nonlinear optics.

High-Q-factor nanobeam photonic crystal cavities in bulk silicon carbide

High-Q and High-Order Side-Coupled Air-Mode Nanobeam Photonic Crystal Cavities in Silicon

Fabrication of Optical Cavities with Femtosecond Laser Pulses

High-Q Photonic Crystal Nanobeam Cavities on Silicon

Photonic crystal cavities in silicon dioxide

High- Q Photonic Crystal Cavity in a Single-Mode Silicon Ridge Waveguide

High-Q nanocavities in semiconductor-based three-dimensional photonic crystals

Photonic crystal nanobeam cavity strongly coupled to the feeding waveguide

An Improved Surface-Plasmonic Nanobeam Cavity for Higher Q and Smaller V

High-Q Antisymmetric Multimode Nanobeam Photonic Crystal Cavities in Silicon Waveguides

High-Q Weakly Modulated Nanobeam Cavity Based On A Suspended Silicon Dioxide Waveguide

High-Q photonic nanocavity in a two-dimensional photonic crystal

Encapsulated silicon nitride nanobeam cavity for nanophotonics using layered materials

Photoluminescence from silicon dioxide photonic crystal cavities with embedded silicon nanocrystals

High-Q Photonic Crystal Microcavities

Photonic Crystal Cavities in Cubic (3C) Polytype Silicon Carbide Films

High quality factor nanophotonic resonators in bulk rare-earth doped crystals

Ultrasmall-V High-Q Photonic Crystal Nanobeam Microcavities Based on Slot and Hollow-Core Waveguides

Glass-embedded two-dimensional silicon photonic crystal devices with a broad bandwidth waveguide and a high quality nanocavity

Free-standing silicon nitride nanobeams with efficient fiber-chip interface for cavity QED

Rectangular Photonic Crystal Nanobeam Cavities in Bulk Diamond