The influence of oxide layer pattern size created on the surface of C45 steel on laser light absorption during laser quenching procedure

M Hruška,M Vostřák,J Tesař

DOI: https://doi.org/10.1088/1757-899x/461/1/012027

2018-12-10

IOP Conference Series: Materials Science and Engineering

Abstract:An increase in surface absorptivity can be helpful with a number of laser heat treatment processes. This study examines the relationship between the surface condition and its influence on interaction with a laser beam. The aim of this paper is to examine the effect of the oxide layer pattern size on the absorption of IR radiation and the influence of the ambient atmosphere. The process was carried with inert gas shielding. The oxide layers are created by the controlled heating method. The controlled heating method uses a scanning laser system to create oxide layers of different thickness on steel EN 10083-2: C45. Subsequently, the absorbency of the formed oxide layer was measured, depending on the irradiation energy emitted into the surface. According to recent experiments has been found that the higher the thickness of the oxide layer increases absorption. These results have shown that the use of surface oxidation increases the coupling of laser energy to material surface in the order of tens of percent. The thickness and hardness of the laser hardened layer were considered. That paper describes possibilities of precise laser quenching of the oxidized C45 material surface.

English Else