Abstract:Laser hardening is an important branch of laser surface hardening technology, which is widely used in metallurgy, transportation, machinery manufacturing, aerospace and other fields. At present, relying entirely on experience or process trial-and-error method, it can not effectively reveal the transient mechanism of laser quenching of disk laser, which is not conducive to shortening the research and development cycle and saving costs. The numerical simulation provides an effective way to obtain the dynamic evolution law of multi-field coupling in laser quenching process. In this paper, a thermo-mechanical coupling model of ASTM 1045 laser quenching process by disk laser is established. In the model, the temperature-dependent physical parameters were calculated by CALPHAD method. The transient law of temperature and microstructural transformation during quenching was obtained by solving the model. The formation and transformation degree of martensite were characterized by the dynamic changes of the depth and width of quenched transformation layer. The quenching structure and transformation hardening law were observed by Axioskop 2 SEM and Zeiss-IGMA HD FE-SEM to verify the accuracy of the simulation results. On this basis, the process parameters of laser quenching were sampled by Monte-Carlo method based on response surface methodology. The sensitivity effects of different process parameters on the temperature field and phase change field of laser quenching were analyzed, which laid a theoretical foundation for the optimization of process parameters.Graphical (1) Establish a thermo-mechanical coupling model for quenching process of ASTM 1045, and the sensitivity of the system is calculated. (2) The model can accurately reproduce the transient process of temperature and phase transformation field during laser quenching. (3) The laser power and laser incident angle are positively correlated with the response value. (4) The spot diameter and scanning speed are negatively correlated with response value. (5) The model can effectively calculate the sensitivity of laser quenching, predict the width and depth of quenching layer, and optimize process parameters.

The effect of the laser spots overlap on the structure during square parts quenching of 1.7225 steel

Numerical simulation and correlation research of multi-track overlapping laser quenching process for 40Cr steel

Effects of Overlapping Distances on Steel Microstructure and Properties After Multi-track Laser Quenching

The influence of oxide layer pattern size created on the surface of C45 steel on laser light absorption during laser quenching procedure

Research on 40Cr Laser Quenching Process for Guide Rail

Laser Quenching of Ionic Nitrided Steel: Effect of Process Parameters on Microstructure and Optimization

Microstructure refinement and properties of 1.0C-1.5Cr steel in a duplex treatment combining double quenching and laser surface quenching

Effect of various quenching treatments on microstructure and mechanical behavior of a laser additively manufactured 12CrNi2 alloy steel

Influence of the initial structure on the efficiency of laser processing of steel

Study on Multi-Field Coupled Evolution Mechanism of Laser Irradiated 40Cr Steel Quenching Process Based on Phase Change Induced Plasticity

Numerical research on effect of overlap ratio on thermal-stress behaviors of the high-speed laser cladding coating*

Effects of Scanning Strategies on the Distortion and Properties of Laser-Repaired Thin-Plate 2Cr13 Steel

Effect of laser quenching and subsequent heat treatment on the structure and wear resistance of a cemented steel 20KhN3A

Temperature Field Simulation and Experimental Analysis of Laser Cladding 45 Steel.

Surface properties of low alloy steel treated by plasma nitrocarburizing prior to laser quenching process

Aspects of Structure and Properties Formation in Steels During Laser-Acoustic Processing

Study on the quenching depth and surface hardness of metal materials by laser quenching variable parameters

Sensitivity Analysis of Laser Quenching Parameters of ASTM 1045 of Disk Laser Based on Response Surface Method

Surface characteristic and wear resistance of QT-700-2 nodular cast iron after laser quenching combing with shot peening treatment

Optimization of laser irradiation process parameters for 40Cr steel based on back propagation neural network and genetic algorithm

Phase-field simulation and high-temperature confocal laser scanning microscope experimental study of Martensite transformation during the disk laser quenching process