Abstract:A physically based material model for metals, with elastic–plastic and damage/failure orthotropy is proposed in this paper. The model is defined within the frameworks of irreversible thermodynamics and configurational continuum mechanics and integrated in the isoclinic configuration. The use of the multiplicative decomposition of deformation gradient makes the model applicable to arbitrary plastic and damage deformations. To account for the physical mechanisms of failure, the concept of thermally activated damage initially proposed by Klepaczko (1990) was adopted as the basis for the new damage evolution model. This makes the proposed damage/failure model compatible with the Mechanical Threshold Strength (MTS) model (Follansbee and Kocks, 1988; Chen and Gray, 1996; Goto et al., 2000; Gray et al., 1999; Chen et al., 1998) which was used to control evolution of flow stress during plastic deformation. In addition the constitutive model is coupled with a shock equation of state which allows for modelling of shock wave propagation in the material. The new model was implemented in DYNA3D and our in-house non-linear transient SPH code, MCM (Meshless Continuum Mechanics).Parameters for the new constitutive model for AA7010 (a polycrystalline aluminium alloy, whose orthotropy is a consequence of grain morphology), were derived on the basis of the tensile tests and Taylor anvil tests. The tensile tests were performed for the range of temperatures between 223.15K and 413.15K, and strain rates between 6.4×10-4s-1 and 6.4×101s-1.The new model was validated in two stages. The first stage comprised a series of single element tests design to separately validate elasticity, plasticity and damage related parts of the model. The second stage comprised a series of numerical simulations of Taylor anvil and plate impact tests for AA7010 and comparison of the numerical results with the experimental data. The numerical results illustrate the ability of the new model to predict experimentally observed behaviour.

Characterization of damage and toughness of 5052 aluminum alloy based on continuum damage mechanics

Investigation on tensile deformation and failure for 5052 aluminum alloy based on continuum damage model

A New Approach for Studying Fatigue Damage

Study on Mechanical Properties and Constitutive Model of 5052 Aluminium Alloy

Experimental and numerical investigation on plasticity and fracture behaviors of aluminum alloy 6061-T6 extrusions

A damage sequence interaction model for predicting the mechanical property of in-service aluminium alloy 6005A-T6

Damage analysis of aluminum alloy gusset joints under cyclic loading based on continuum damage mechanics

Development of an Improved MMC-based Fracture Criterion Characterizing the Anisotropic and Strain Rate-Dependent Behavior of 6061-T5 Aluminum Alloy

Experimental Study on Constitutive Model of High-Strength Aluminum Alloy 6082-T6

A strain-dependent ductile damage model and its application in the derivation of fracture toughness by micro-indentation

Enhanced CDM model accounting of stress triaxiality and Lode angle for ductile damage prediction in metal forming

A Damage-Effect-involved Phenomenological Crystal Plasticity Model and Computational Methods for Mechanical Responses of FeCrAl Alloys

Simulation of Ductile Fracture in an Aluminum Alloy Using Various Criteria

A Model of Continuum Damage Mechanics for High Cycle Fatigue of Metallic Materials

A continuum damage model for Mg/Al composite sheets rolling: Theoretical development and application

Analysis of ductile damage and fracture under reverse loading

Development of a Modified Gurson–Tvergaard–Needleman Damage Model Characterizing the Strain-Rate-Dependent Behavior of 6061-T5 Aluminum Alloy

Modeling the anisotropic plasticity and damage of AA7075 alloy in hot forming

Modelling of dynamic behaviour of orthotropic metals including damage and failure

Characterization and modelling of evolving plasticity behaviour up to fracture for FCC and BCC metals

Modeling of Ductile Damage and Fracture Behavior Based on Different Micromechanisms