Abstract:<h3 class="a-plus-plus">Abstract</h3> <p class="a-plus-plus">For the first time, it was experimented with high voltage electrostatic field (HVEF) for the optimization of the bonding process of urea formaldehyde (UF) resin to wood. Varying HVEF treatment times (0–8 min) and intensities (5–20 kV) were applied. Wood surface characteristics, polymerization extent of UF, and bonding interphase of UF to wood were examined by electron spin resonance (ESR) spectroscopy, dynamic contact angle goniometers, Fourier transform infrared spectroscopy (FTIR), X-ray densitometer, fluorescence microscope and bonding strength measurement. The results indicated that HVEF treatments applied to wood veneer induced a decrease in contact angles and an increase in the free radicals of wood, and surface energy varied with treatment times and intensities. These varieties were because triggered free electrons, broken chemical bonds and new ions appeared on the wood surface with HVEF treatment. An aggregated performance was obviously obtained in micrographs and vertical density profiles (VPDs). It was explained that resin penetration into wood structure was significantly shallow, and resin concentration and density at bonding interphase were more enhanced than the control. This is due to the increment of surface energy and lower contact angles providing more chances for possible reactions of wood surface with the UF resin. Resin penetration depth and density varied with different treatment times and intensities. Increased cross-linking extent of UF was obtained under varied conditions of HVEF treatment. The bonding strength was measured as a function of treatment times and intensities respectively; it increased by 85% and the wood failure ratio significantly increased by 70% under HVEF treatment (20 kV, 8 min) due to the aggregation performance and more cross-linked UF resin. It was manifested that both treatment time and intensity play a significant role in HVEF treatment, and HVEF treatment has a significant influence on the characteristics of the wood surface and the bonding properties of wood composites.</p>

An innovative approach to manufacturing flexible decorative wood veneer using EVA film as adhesive and reinforcing materials

Mechanical and Water Soaking Properties of Medium Density Fiberboard with Wood Fiber and Soybean Protein Adhesive.

Modified high-density polyethylene film as the adhesive for veneer overlaying of wood-based panel

Influence of micron-sized oligomeric semisiloxane modification on surface properties of veneer and interfacial adhesion of EVA film/poplar plywood

The use of wood veneer to beautify wood plastic composites

Warpage control method during surface forming process of plastic film‐reinforced flexible decorative veneer

Investigating the influence of fabrication parameters, flax fibre reinforcement, and ageing on interlaminar shear strength in thermoplastic-bonded wood veneers

Characteristic Properties of a Bamboo-Based Board Combined with Bamboo Veneers and Vacuum Heat-Treated Round Bamboo Sticks

Plant cell wall reconstruction towards enhancing moisture stability and toughness by assembling delignified wood with alkali lignin

Fabrication of an Ultrastrong Formaldehyde-Free Wood Adhesive with an Organic-Inorganic Cross-Linking Network

Development of Veneer – Bamboo Mat Flexi Ply

Influence of high voltage electrostatic field (HVEF) on bonding characteristics of Masson (Pinus massoniana Lamb.) veneer composites

An Eco-Friendly Wood Adhesive Consisting of Soybean Protein and Cardanol-Based Epoxy for Wood Based Composites

A Study on the Bonding Technology in Sliced Bamboo Veneer Manufacturing

STRUCTURAL ASSESSMENT OF LAMINATED WOOD VENEER/PLASTIC SHEET COMPOSITES USED AS BUILDING MATERIAL

Preparation and Performance of Leather-Finished Plywood

Combustion behavior, mechanical performance and application for vinyl acetate–ethylene copolymer emulsion containing melamine amino trimethyl phosphate and sodium lignosulfonate

Study on Dimensional Stability of Veneer Rice Straw Particleboard

Analyzing the impact of veneer layup direction and heat treatment on plywood strain distribution during bending load by digital image correlation (DIC) technique

Performance Evaluation of Carbon Fiber Fabric-Reinforced Formaldehyde-Free High-Strength Plywood

Investigation of adhesive bond strength when facing furniture boards with flexible stone veneer