ANALYSIS OF BISPHENOL A IN INDONESIAN CANNED FOOD BY GAS CHROMATOGRAPHY

Herman Suryadi,Amiratul Haq Rasyid,Harmita .
DOI: https://doi.org/10.22159/ijap.2018.v10s1.05
2018-12-20
International Journal of Applied Pharmaceutics
Abstract:Objective: This study aimed to design and optimize a gas chromatography-flame ionization detection (GC-FID) method to determine the bisphenol A (BPA)content in Indonesian canned food samples.Methods: GC with Hewlett-Packard-1 capillary columns (length, 30 m; inside diameter, 0.25 mm; and film thickness, 0.25 μm) was used with a columntemperature of 150°C that was programmed to increase by 10°C/min to 260°C. Injector and detector temperatures were 280 and 300°C, respectively,the gas flow rate was 1.0 mL/min, and injection volume was 3.0 μL. Three types of canned food samples were prepared by ethyl acetate extraction andstored under four different conditions (4–8°C, 25–30°C, 40°C for 30 min, and 40°C for 60 min) to determine BPA migration levels.Results: Method validation (system compatibility, selectivity, calibration curve linearity, accuracy, and precision) was acceptable for BPAconcentrations ranging from 2 to 15 μg/mL, with a coefficient of correlation of 0.99983. The limits of detection and quantitation were 0.287 and0.956 μg/mL, respectively. Only one canned food sample type (Group A) showed BPA contamination under all storage conditions and exceeded therecommended guidelines for daily ingestion.Conclusion: The optimized GC-FID method was selective and relatively sensitive in the detection and quantitation of BPA. Furthermore, higherstorage temperatures and durations increased the level of BPA migration into food.
What problem does this paper attempt to address?