The incorporation of the carboxyl carbon from acetate into cholesterol by rat liver homogenates.

I. Frantz,N. Bucher

DOI: https://doi.org/10.1016/s0021-9258(18)71339-2

IF: 5.485

Journal of Biological Chemistry

Abstract:

What problem does this paper attempt to address?

An Electrochemical Aptasensor Based on Gold Nanoparticles Dotted Graphene Modified Glassy Carbon Electrode for Label-Free Detection of Bisphenol A in Milk Samples.

Ling Zhou,Jianping Wang,Dujuan Li,Yanbin Li

DOI: https://doi.org/10.1016/j.foodchem.2014.04.058

IF: 8.8

2014-01-01

Food Chemistry

Abstract:A simple and label-free electrochemical aptasensor for bisphenol A (BPA) determination was developed based on gold nanoparticles dotted graphene (GNPs/GR) nanocomposite film modified glassy carbon electrode (GCE). The electrochemical probe of ferricyanide was used to investigate the interactions between aptamer and BPA. The resulting GNPs/GR layer exhibited good current response for BPA detection. The highly conductive and biocompatible nanostructure of GNPs/GR nanocomposite was characterised by atomic force microscope (AFM), scanning electron microscopy (SEM) and cyclic voltammetry (CV). The peak current change (ΔI) of ferricyanide was linear with the concentration of BPA in the range from 0.01 μM to 10 μM with the detection limit of 5 nM. The proposed aptasensor is rapid, convenient and low-cost for effective sensing of BPA. Particularly, the aptasensor was applied successfully to determine BPA in milk products, and the average recovery was 105%.
A semi-covalent molecularly imprinted fluorescent sensor for highly specific recognition and optosensing of bisphenol A

Jinna Zhang,Haiyang Wang,Longhua Xu,Zhixiang Xu

DOI: https://doi.org/10.1039/d0ay01822h

2021-01-07

Abstract:A novel mesoporous fluorescent molecularly imprinted sensor for selective detection of bisphenol A (BPA) in food materials was fabricated via a semi-covalent imprinting method. The imprinting precursor that served as an alternative template molecule for BPA was prepared via thermally reversible isocyanate bonding, which effectively improved the imprinting efficiency for the molecularly imprinted sensor. Carbon dots (CDs) were embedded in mesoporous silica as signal recognition elements that exhibited quenching upon BPA binding. Subsequently, through the sol-gel process, the molecularly imprinted layer was coated on the CDs silica layer and provided specific recognition sites for BPA. The composite of CDs embedded in the mesoporous molecularly imprinted polymer (CDs@MIP) was characterized with scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller measurements and thermogravimetric analysis. The mechanism of carbon dots quenching and the high selectivity of CDs@MIP towards BPA were explored. The linear response range of the sensor was from 0.025 mg L-1 to 2 mg L-1 with a limit of detection of 0.016 mg L-1. The method was successfully applied for the determination of food samples and recoveries ranged from 92.5% to 101.1%. The BPA contents in actual samples were determined using high performance liquid chromatography and the proposed sensor, showing no significant difference between the two methods.
A novel fluorescent sensor based on a magnetic covalent organic framework-supported, carbon dot-embedded molecularly imprinted composite for the specific optosensing of bisphenol A in foods

Haiyang Wang,Shanshan Jiang,Zhixiang Xu,Shuang zhou,Longhua Xu

DOI: https://doi.org/10.1016/j.snb.2022.131729

2022-06-01

Abstract:An efficient one-pot strategy for the synthesis of a bisphenol A (BPA) fluorescent sensor based on a magnetic covalent organic framework-supported, carbon dot-embedded molecularly imprinted composite (named @MIP) is reported for the first time in this work. Herein, MCOFs were prepared via the simple in-situ growth of COF crystals on Fe3O4 nanoparticles and acted as supports to provide a large surface area for CD-embedded MIP layer deposition through a room temperature sol-gel molecular imprinting process. The fabricated @MIP integrated the useful magnetic properties of Fe3O4, the signal transduction function of CDs, the signal amplification effect derived from the COFs and MIP, and the specific recognition behavior of MIP toward template molecule BPA. Based on the fluorescence quenching behavior of BPA for the @MIP, a highly sensitive and selective fluorescent @MIP sensor was developed over the concentration range of 25-3000 μg L-1 with a low detection limit (12 μg L-1). Furthermore, the @MIP sensor was employed to detect BPA in canned goods and boxed drinks with satisfactory results, which agreed well with those obtained by the traditional high performance liquid chromatography (HPLC) method, demonstrating the good reliability, accuracy and practicality of our constructed sensor.
Molecularly imprinted photopolymers combined with smartphone-based optical sensing for selective detection of bisphenol A in foods

Dounia Elfadil,Aziz Amine

DOI: https://doi.org/10.1007/s00216-024-05212-0

2024-03-12

Analytical and Bioanalytical Chemistry

Abstract:Bisphenol A (BPA), known for its endocrine-disrupting properties and potential to leach into food products, has led to significant food safety concerns. Therefore, the development of sensitive and selective BPA rapid detection methods is crucial. In this study, molecularly imprinted solid-phase extraction coupled to a colorimetric method was adopted for the smartphone-based determination of BPA. The molecularly imprinted polymer (MIP) was prepared via photopolymerization and used as a selective adsorbent material for SPE columns. The solid-phase extraction (SPE) columns with multiple cycles significantly reduced the extraction time to only 30 min. The developed method demonstrates useful sensitivity for BPA (LOD = 30 ppb). Furthermore, BPA migration from plastic packaging was evaluated under different storage conditions, revealing that microwave treatment for 5 min led to BPA release from polycarbonate packaging in juice and basic solutions. The MIP selective extraction/clean-up and smartphone-based optical sensor were successfully applied to BPA standard solutions and complex food samples (e.g., juice and tap water), resulting in reproducible and selective BPA determination (RSD ≤ 6%, n = 3). This rapid and cost-effective method of producing MIPs for BPA offers a promising solution for fast and low-cost sensing for on-site fresh food analysis.

chemistry, analytical,biochemical research methods
Surface Molecular Imprinting on Hybrid SiO2-coated CdTe Nanocrystals for Selective Optosensing of Bisphenol A and Its Optimal Design

Chunxiao Qiu,Youhong Xing,Wenming Yang,Zhiping Zhou,Yingchun Wang,Hong Liu,Wanzhen Xu

DOI: https://doi.org/10.1016/j.apsusc.2015.03.150

IF: 6.7

2015-01-01

Applied Surface Science

Abstract:Twenty molecular dynamics (MD) simulations of molecular imprinting prepolymerization systems had been performed to optimize the imprinting shell of the fluorescent sensor. The results revealed that the system with a Bisphenol A (BPA): 3-aminopropyltriethoxysilane (APTES): tetraethylorthosilicate (TEOS) mole ratio of 10:15:60 had the most stable template (T)-functional monomer (FM) cluster. Correspondingly, five kinds of imprinted and non-imprinted polymers were synthesized to assess the reliability and validity of the simulation results. Hybrid SiO2-coated CdTe NCs (HS-QD) were synthesized by a simple reflux procedure including a sol-gel reaction that resulted in the formation of a hybrid SiO2 layer with CdS-like clusters on a CdTe core. Based on the optimal component ratio of the prepolymerization system, MIP shells were anchored on the surface of HS-QD to build a fluorescent MIP sensor. A linear relationship between relative fluorescence intensity and the concentration of BPA had been obtained covering the concentration range of 0.05-10 mu mol L-1 with a limit of detection of 6 nmol L-1. The feasibility of the fluorescent sensor was successfully evaluated through the analysis of BPA in river water and milk. The recoveries are above 96.31%, and the relative standard deviation (RSD) ranged from 1.55% to 2.78%. (C) 2015 Elsevier B.V. All rights reserved.
Socio-economic position, smoking, and plaque: a pathway to severe chronic periodontitis.

A. Zini,H. Sgan-Cohen,W. Marcenes

DOI: https://doi.org/10.1111/j.1600-051X.2010.01689.x

IF: 7.478

2011-03-01

Journal Of Clinical Periodontology

Abstract:AIM To report periodontal status and elucidate the relationship among socio-economic position (SEP), plaque accumulation, tobacco smoking, and periodontitis in a representative sample of adult Jewish people, aged 35-44 years, living in Jerusalem. METHODS This cross-sectional study was conducted using a stratified sample of two hundred and fifty-four 35-44-year-old adults in Jerusalem (limited to the Jewish population). A clinical examination (Community Periodontal Index and Plaque Index) and a self-administered questionnaire were applied. RESULTS Two hundred and fifty-four adults, mean age 38.6 (SD=3.3) years, participated. The response rate was 88%; intra-examiner κ values were above 0.87. The average number of healthy sextants was 1.18, while the average number of sextants with bleeding, calculus, shallow periodontal pockets, and deep periodontal pockets was 1.3, 2.6, 0.7, and 0.1, respectively. Lower level of education was associated with severe chronic periodontitis (SCP, p=0.012) and also with smoking (p=0.030) and higher level of plaque (p<0.001). Smoking was associated with higher level of plaque (p<0.001), which in turn was associated with SCP (p=0.020). CONCLUSION This study presented a potential explanatory pathway for the relationship between SEP and SCP. Low level of education was proposed as a distal determinant, leading to tobacco smoking and higher levels of plaque, and finally to SCP.
Molecularly imprinted curcumin nanoparticles decorated paper for electrochemical and fluorescence dual-mode sensing of bisphenol A

Abdelmoneim Mars,Alma Mejri,Ahmed Hichem Hamzaoui,Hamza Elfil

DOI: https://doi.org/10.1007/s00604-021-04753-w

2021-02-21

Abstract:A molecularly imprinted paper-based analytical device (MIP-μPAD) was developed for the sensing of bisphenol A (BPA). The platform was screen-printed onto a filter paper support, where the electrodes and the fluorescence μPADs were designed. Owing to its dual electrochemical and fluorescence responses, molecularly imprinted curcumin nanoparticles were used to sense BPA. The μPAD design was characterized by transmission electron microscopy, scanning electron microscopy, fluorescence spectroscopy, and electrochemical techniques. The sensor design comprised a wide linear range from 1 to 200 μg L-1 with limits of detection of 0.47 ± 0.2 and 0.62 ± 0.3 μg L-1 (LOD, S/N = 3) for electrochemical and fluorescence sensing, respectively. Furthermore, the system showed good analytical performance such as selectivity, stability, and reproducibility. The feasibility of the MIP-μPAD was demonstrated for the sensing of BPA in seawater, foods, and polycarbonate plastic packaged water with recovery values of 97.2 and 101.8%.
A fluorescent method for bisphenol A detection based on enzymatic oxidation-mediated emission quenching of silicon nanoparticles

Shi Gang Liu,Tiankang Wu,Zhixin Liang,Qian Zhao,Wenli Gao,Xingbo Shi

DOI: https://doi.org/10.1016/j.saa.2023.123123

2023-07-13

Abstract:As a common raw material of industrial products, bisphenol A (BPA) is widely used in the production of food contact materials, and there is a high risk of exposure in food. However, BPA is a well-known endocrine disruptor and poses a serious threat to human health. Herein, a fluorescent sensing platform of BPA based on enzymatic oxidation-mediated fluorescence quenching of silicon nanoparticles (SiNPs) is established and used to the detection of BPA in food species. The SiNPs are prepared with a facile one-step synthesis and emit bright green fluorescence. BPA can be oxidized by horseradish peroxidase (HRP) and hydrogen peroxide (H 2 O 2 ) to form a product which can quench the fluorescence of SiNPs through electron transfer. There is a good linear relationship between the fluorescence intensity and BPA concentration in the range of 1–100 μM. Therefore, a fluorometry of BPA is established with a low limit of detection (LOD) of 0.69 μM. This method has been applied to the determination of BPA in mineral drinking water, orange juice, and milk with satisfactory results. The fluorescent sensor of BPA based on SiNPs has favorable application foreground in the field of food safety analysis.

spectroscopy
Simultaneous fluorescence determination of bisphenol A and its halogenated analogs based on a molecularly imprinted paper-based analytical device and a segment detection strategy

Lingshuai Zeng,Xiu Zhang,Xiu Wang,Danqi Cheng,Ruifang Li,Bin Han,Minmin Wu,Zhijia Zhuang,Annan Ren,Yikai Zhou,Tao Jing

DOI: https://doi.org/10.1016/j.bios.2021.113106

IF: 12.545

2021-05-01

Biosensors and Bioelectronics

Abstract:Bisphenol A (BPA) and its halogenated analogs tetrabromobisphenol A (TBBPA) and tetrachlorobisphenol A (TCBPA) are common environmental contaminants and a method for their simultaneous determination is urgently needed. A paper-based analytical device (PAD) was prepared using a metal-organic framework of UiO-66-NH2 coated with molecularly imprinted polymers (MIPs) using TBBPA as a template. The maximum adsorption capacity was 120.94 mg g-1 and the imprinting factor was 4.07. The selective recognition ability of this PAD enabled the effective separation of TBBPA, TCBPA and BPA based on paper chromatography. Subsequently, the PAD cut into segments were used individually to determine the presence of target chemicals using a highly sensitive fluorescent method. Under ultraviolet light irradiation, UiO-66-NH2 acts as a photocatalyst to produce reactive oxygen species (ROS) that degrade TBBPA, TCBPA or BPA in the imprinted cavities and the fluorescent signal of 2',7'-dichlorodihydrofluorescein diacetate (H2DCFDA) added as a ROS probe enabled the indirect determination of target chemicals. This method could determine BPA and its halogenated analogs in dust samples simultaneously with detection limits ranging from 0.14 to 0.30 ng g-1. The intraday relative standard deviation (RSD) was ≤6.8% and interday RSD was ≤8.1%. The recoveries ranged from 91.0 to 105.6% with RSD values that were ≤7.5%. The results stemmed from this method were consistent with those obtained from LC-MS/MS. It is an environmentally-friendly approach due to the degradation of target pollutants and possesses many advantages such as high selectivity, low cost and easy-to-fabrication.

biotechnology & applied microbiology,biophysics,chemistry, analytical,electrochemistry,nanoscience & nanotechnology
Application of a Novel Au@ZIF-8 Composite in the Detection of Bisphenol A by Surface-Enhanced Raman Spectroscopy

Yunfei Xie,Xianghui Dong,Nifei Cai,Fangwei Yang,Weirong Yao,Lijun Huang

DOI: https://doi.org/10.3390/foods12040813

IF: 5.2

2023-02-16

Foods

Abstract:Bisphenol A (BPA) is an endocrine disruptor which is widely present in fish under the influence of environmental pollution. It is essential to establish a rapid detection method for BPA. Zeolitic imidazolate framework (ZIF-8) is a typical metal-organic framework material (MOFs) with a strong adsorption capacity, which can effectively adsorb harmful substances in food. Combining MOFs and surface-enhanced Raman spectroscopy (SERS) can achieve rapid and accurate screening of toxic substances. In this study, a rapid detection method for BPA was established by preparing a new reinforced substrate Au@ZIF-8. The SERS detection method was optimized by combining SERS technology with ZIF-8. The Raman peak at 1172 cm−1 was used as the characteristic quantitative peak, and the lowest detection concentration of BPA was as low as 0.1 mg/L. In the concentration range of 0.1~10 mg/L, the linear relationship between SERS peak intensity and the concentration of BPA was good, and R2 was 0.9954. This novel SERS substrate was proven to have great potential in rapidly detecting BPA in food.

food science & technology
Simple design of upconversion nanoparticles-based aptasensor integrated microfluidic chip for ultra-sensitive detection of bisphenol A in aquatic products

Jizhong Wu,Wenya Wei,Muhammad Zareef,Shuhua Li,Qin Ouyang,Quansheng Chen

DOI: https://doi.org/10.1016/j.snb.2023.134017

2023-05-31

Abstract:Bisphenol A (BPA) is an endocrine disrupting chemical having estrogenic properties that can enter the body through leaking from food containers or the food chain. An upconversion nanoparticle-based aptasensor integrated with microfluidic chip was simply designed to achieve the determination of BPA in foodstuff. Core-shell structured upconversion nanoparticles with 6.41-fold luminescence enhancement were used as fluorescence donors and gold nanoparticles as fluorescence acceptors to construct fluorescence resonance energy transfer (FRET) system. The BPA aptamer serves as a link between the building of the FRET system and the BPA-specific recognition component. The fishbone-structured microfluidic chip only needs 0.5 μL sample solution and 4 min to determine the presence of BPA. The proposed method has good linearity for BPA in the range of 0.02–100 ng/mL with calibration curve of y = 0.0918 x + 0.6477 and limit of detection of 0.014 ng/mL. It is tremendously competitive to perform on-chip analysis that enables microsampling and rapid determination.

chemistry, analytical,electrochemistry,instruments & instrumentation
Preparation of molecularly imprinted ratiometric fluorescence sensor for visual detection of tetrabromobisphenol A in water samples

Yanming Shao,Peng Wang,Rui Zheng,Zhizhen Zhao,Jun An,Caifeng Hao,Mengyi Kang

DOI: https://doi.org/10.1007/s00604-023-05745-8

2023-03-29

Mikrochimica Acta

Abstract:A sensitive molecularly imprinted ratiometric fluorescence sensor was constructed for the first time to visually detect tetrabromobisphenol A (TBBPA). The blue fluorescent carbon quantum dots (CQDs) were coated with SiO 2 through the reverse microemulsion method to obtain a stable internal reference signal CQDs@SiO 2 . The ratiometric fluorescence sensor was finally prepared using red fluorescent CdTe QDs as the response signal in the presence of CQDs@SiO 2 . When the molecularly imprinted polymers were combined with TBBPA, the fluorescence of CdTe QDs (Ex = 365 nm, Em = 665 nm) was rapidly quenched, while that of CQDs (Ex = 365 nm, Em = 441 nm) remained stable, resulting in a noticeable fluorescence color change. Moreover, the fluorescence intensity ratio (I 665 /I 441 ) 0 /(I 665 /I 441 ) of the sensor showed a linear response to TBBPA in the concentration range 0.1 to 10 μM with a low detection limit of 3.8 nM. The prepared sensor was successfully applied to detect TBBPA in water samples. The recoveries were in the range 98.2–103%, with relative standard deviations lower than 2.5%. Furthermore, a fluorescent test strip for visual monitoring of TBBPA was constructed to streamline the procedure. The excellent results demonstrate that the prepared test strip has a broad prospect for the offline detection of pollutants.
A novel ratiometric imprinted electrochemical sensing bisphenol A using MIP with alkenyl ferrocene as a functional monomer and COF-derived porous carbon as a sensitive element

Jian Zhang,Yanbo Zeng,Yiwen Yang,Haiqing Liu,Zhidong Chen,Longhua Guo,Lei Li

DOI: https://doi.org/10.1016/j.electacta.2023.143672

IF: 6.6

2023-12-25

Electrochimica Acta

Abstract:Free radical polymerization is widely used for preparing molecularly imprinted polymers (MIPs) by copolymerizing alkenyl functional monomers and cross-linkers with the template molecules. However, these monomers based electrochemical sensors can only construct single-signal electrochemical sensors, making them vulnerable to various interferences. Therefore, this work aims to construct a ratiometric molecularly imprinted (RMI) electrochemical sensor by free radical polymerization. First, 3-butenoic acid (ferrocenyl) methyl ester (BA-Fc) as an alkenyl ferrocene was synthesized using hydroxymethylferrocene as a reactant. A new ferrocene-based molecularly imprinted polymer (Fc-MIP) was then synthesized by free radical polymerization with BA-Fc as functional monomer. To enhance the electrical conductivity of the covalent organic framework (COF), COF-derived porous carbon (COF-PC) was synthesized through pyrolysis. A RMI electrochemical sensor was then constructed to detect bisphenol A (BPA). For this construction, COF-PC and Fc-MIP served as the sensitive and selective elements, respectively. The oxidation peaks of BPA and Fc were utilized for the response and internal reference signals, respectively. This sensor displayed a linear ratiometric signal (I BPA /I Fc ) in response to BPA concentrations from 0.1 to 10 μM with detection limit of 0.03 μM. The relative standard deviation of the non-ratiometric and ratiometric sensors was 6.71% and 3.10%, respectively, demonstrating the advantage of the RMI sensor. This proposed sensor, exhibiting satisfactory reproducibility, sensitivity, and selectivity, was successfully applied in detecting BPA in samples of industrial wastewater, soil, and plastic bottles.

electrochemistry
Hot Chips 26 [Guest editors' introduction]

S. Naffziger,G. Sohi

DOI: https://doi.org/10.1109/MM.2015.29

IF: 2.8212

2015-03-01

IEEE Micro

Abstract:
Selective determination of bisphenol A (BPA) in water by a reversible fluorescence sensor using pyrene/dimethyl β-cyclodextrin complex

Xu Wang,Hulie Zeng,Lixia Zhao,Jin-Ming Lin

DOI: https://doi.org/10.1016/j.aca.2005.09.060

IF: 6.911

2006-01-01

Analytica Chimica Acta

Abstract:A bifurcated optical fiber chemical sensor for continuous monitoring of bisphenol A (BPA) has been proposed based on the fluorescence quenching (λex/λem=286/390nm) of pyrene/dimethyl β-cyclodextrin (HDM-β-CD) supramolecular complex immobilized in a plasticized poly(vinyl chloride) (PVC) membrane, in which pyrene served as a sensitive fluorescence indicator probe. The decrease of the fluorescence intensity of pyrene/HDM-β-CD complex upon the addition of BPA was attributed to the displacement of pyrene by BPA, which has been utilized as the basis of the fabrication of a BPA-sensitive fluorescence sensor. The response mechanism of the sensor was discussed in detail. The sensor exhibited a dynamic detection range from 7.90×10−8 to 1.66×10−5molL−1 with a detection limit of 7.00×10−8molL−1, and showed excellent reproducibility, reversibility, selectivity, and lifetime. The proposed sensor was successfully used for the determination of BPA in water samples and landfill leachate.
Molecular Imprinted Photoelectrochemical Sensor for Bisphenol A Supported by Flower-Like AgBiS2/In2S3 Matrix

Rui Xu,Yu Du,Lei Liu,Dawei Fan,Liangguo Yan,Xuejing Liu,Huan Wang,Qin Wei,Huangxian Ju

DOI: https://doi.org/10.1016/j.snb.2020.129387

IF: 9.221

2020-01-01

Sensors and Actuators B Chemical

Abstract:As one of the fashionable ways for molecular recognition site display, molecular imprinting technology has attracted increasing attention as a means to design complementary parts of target molecules. Herein, a novel molecularly imprinted photoelectrochemical (PEC) sensor is designed for bisphenol A (BPA) analysis based on In2S3/Cd2+ sensitized flower-like AgBiS2. The bimetallic sulphide AgBiS2 possess a three-dimensional flower-like structure that is assembled by using nanosheets, the outstanding structure provides a favorable surface morphology for fixing other photoactive nanomaterials. Thus, photosensitizer In2S3 nanoparticles are used to sensitize AgBiS2, and an enhanced PEC response is achieved thanks to the matched band gap and the electron delivery synergy. In order to acquire a more stable and higher photocurrent, Cd2+ is dropped directly on the AgBiS2/In2S3 electrode to generate CdS in situ, the generated CdS coupled with In2S3 co-sensitize AgBiS2 and realized satisfactory PEC basic response. The molecularly imprinted membrane is prepared by electrodeposition of pyrrole solution in the presence of BPA. Under optimized detection conditions, the proposed PEC sensor displays a wide detection range between 0.0005 and 50 mu M for BPA, and with a low detection limit 0.18 nM. The skillful strategy also displays excellent stability and great reproducibility.
An Overview to Molecularly Imprinted Electrochemical Sensors for the Detection of Bisphenol A

Ying Pan,Mengfan Wu,Mingjiao Shi,Peizheng Shi,Ningbin Zhao,Yangguang Zhu,Hassan Karimi-Maleh,Chen Ye,Cheng-Te Lin,Li Fu

DOI: https://doi.org/10.3390/s23208656

IF: 3.9

2023-10-25

Sensors

Abstract:Bisphenol A (BPA) is an industrial chemical used extensively in plastics and resins. However, its endocrine-disrupting properties pose risks to human health and the environment. Thus, accurate and rapid detection of BPA is crucial for exposure monitoring and risk mitigation. Molecularly imprinted electrochemical sensors (MIES) have emerged as a promising tool for BPA detection due to their high selectivity, sensitivity, affordability, and portability. This review provides a comprehensive overview of recent advances in MIES for BPA detection. We discuss the operating principles, fabrication strategies, materials, and methods used in MIES. Key findings show that MIES demonstrate detection limits comparable or superior to conventional methods like HPLC and GC-MS. Selectivity studies reveal excellent discrimination between BPA and structural analogs. Recent innovations in nanomaterials, novel monomers, and fabrication techniques have enhanced sensitivity, selectivity, and stability. However, limitations exist in reproducibility, selectivity, and stability. While challenges remain, MIES provide a low-cost portable detection method suitable for on-site BPA monitoring in diverse sectors. Further optimization of sensor fabrication and characterization will enable the immense potential of MIES for field-based BPA detection.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
A portable optic fiber aptasensor for sensitive, specific and rapid detection of bisphenol-A in water samples.

Nimet Yildirim,Feng Long,Miao He,Han-Chang Shi,April Z Gu

DOI: https://doi.org/10.1039/c4em00046c

2014-01-01

Abstract:Bisphenol A (BPA) is a known endocrine disruptor and one of the most serious environmental contaminants, often present at low levels in various water sources. Therefore, it is very important and necessary to develop a fast, cost-effective, sensitive, and selective method for on-site detection of BPA. Herein, we developed a portable, evanescent, wave fiber-optic aptasensor for rapid, on-site detection of BPA with high sensitivity and selectivity. In this system, the probe DNA molecule, which is the complementary sequence of a small part of the BPA aptamer, was covalently immobilized onto the optical fiber sensor surface. Using an indirect competitive detection mode, samples containing different concentrations of bisphenol A were premixed with a given concentration of fluorescence-labeled BPA aptamer, which binds to bisphenol A with high specificity. Then, the sample mixture was pumped to the sensor surface, and a higher concentration of BPA led to less fluorescence-labeled BPA aptamer hybridized with surface immobilized probe DNA and thus to a lower fluorescence signal. The developed sensing system exhibits a sensitive response to BPA in the range of 2 nM to 100 nM with a low detection limit of 1.86 nM (0.45 ng ml(-1)) under the optimal conditions. The biosensors showed good reproducibility, stability, and selectivity for BPA detection. Finally, this proposed sensor was successfully employed to determine the presence of BPA in wastewater samples.
Highly Sensitive and Selective Optofluidics-Based Immunosensor for Rapid Assessment of Bisphenol A Leaching Risk

Feng Long,Anna Zhu,Xiaohong Zhou,Hongchen Wang,Zhen Zhao,Lanhua Liu,Hanchang Shi

DOI: https://doi.org/10.1016/j.bios.2013.11.069

IF: 12.545

2013-01-01

Biosensors and Bioelectronics

Abstract:Bisphenol A (BPA), a xenoestrogenic endocrine-disrupting chemical, is used in many consumer products worldwide and is widely detected in the environment and in food. Combining the advantages of evanescent wave fiber optic sensor and microfluidic technology, an all-fiber optofluidics-based bioassay platform (AFOB) was developed for the rapid immunoassay and assessment of BPA. The captured molecular BPA–bovine serum albumin was covalently immobilized on the surface of the fiber optic sensor. A mixture of different concentrations of BPA and a certain concentration of fluorescence-labeled anti-BPA monoclonal antibodies after pre-reaction was introduced to the optofluidic cell. A higher concentration of BPA reduced the fluorescence-labeled antibodies bound to the sensor surface and thus reduced fluorescence signals. Under optimal conditions, the BPA quantified as 0.5–100μg/L, with a detection limit of 0.06μg/L. The high selectivity of the sensor was evaluated in terms of its response to several potentially interfering chemicals. The potential interference of an environmental sample matrix was assessed by spiked samples, and the recovery of BPA ranged from 90% to 120% with relative standard deviation values of <9.1%. The AFOB and high-performance liquid chromatography had a desired correlation (R2=0.9958). The sensing platform was successfully used to assess BPA leaching from polycarbonate bottles at 45°C and 80°C, indicating that more BPA was substantially leached at elevated temperature and extend time. Thus, the developed sensing strategy can be an alternative method to rapidly analyze and assess the migration mechanism and fate of BPA or other pollutants.
Tracheal intubation without muscle relaxants for caesarean section in patients with spinal muscular atrophy.

A. Habib,H. Muir

DOI: https://doi.org/10.1016/J.IJOA.2004.12.012

IF: 3.282

2005-10-01

International Journal of Obstetric Anesthesia

Abstract:

The incorporation of the carboxyl carbon from acetate into cholesterol by rat liver homogenates.

An Electrochemical Aptasensor Based on Gold Nanoparticles Dotted Graphene Modified Glassy Carbon Electrode for Label-Free Detection of Bisphenol A in Milk Samples.

A semi-covalent molecularly imprinted fluorescent sensor for highly specific recognition and optosensing of bisphenol A

A novel fluorescent sensor based on a magnetic covalent organic framework-supported, carbon dot-embedded molecularly imprinted composite for the specific optosensing of bisphenol A in foods

Molecularly imprinted photopolymers combined with smartphone-based optical sensing for selective detection of bisphenol A in foods

Surface Molecular Imprinting on Hybrid SiO2-coated CdTe Nanocrystals for Selective Optosensing of Bisphenol A and Its Optimal Design

Socio-economic position, smoking, and plaque: a pathway to severe chronic periodontitis.

Molecularly imprinted curcumin nanoparticles decorated paper for electrochemical and fluorescence dual-mode sensing of bisphenol A

A fluorescent method for bisphenol A detection based on enzymatic oxidation-mediated emission quenching of silicon nanoparticles

Simultaneous fluorescence determination of bisphenol A and its halogenated analogs based on a molecularly imprinted paper-based analytical device and a segment detection strategy

Application of a Novel Au@ZIF-8 Composite in the Detection of Bisphenol A by Surface-Enhanced Raman Spectroscopy

Simple design of upconversion nanoparticles-based aptasensor integrated microfluidic chip for ultra-sensitive detection of bisphenol A in aquatic products

Preparation of molecularly imprinted ratiometric fluorescence sensor for visual detection of tetrabromobisphenol A in water samples

A novel ratiometric imprinted electrochemical sensing bisphenol A using MIP with alkenyl ferrocene as a functional monomer and COF-derived porous carbon as a sensitive element

Hot Chips 26 [Guest editors' introduction]

Selective determination of bisphenol A (BPA) in water by a reversible fluorescence sensor using pyrene/dimethyl β-cyclodextrin complex

Molecular Imprinted Photoelectrochemical Sensor for Bisphenol A Supported by Flower-Like AgBiS2/In2S3 Matrix

An Overview to Molecularly Imprinted Electrochemical Sensors for the Detection of Bisphenol A

A portable optic fiber aptasensor for sensitive, specific and rapid detection of bisphenol-A in water samples.

Highly Sensitive and Selective Optofluidics-Based Immunosensor for Rapid Assessment of Bisphenol A Leaching Risk

Tracheal intubation without muscle relaxants for caesarean section in patients with spinal muscular atrophy.