Abstract:Bamboo-concrete composite (BCC) beams are newly-innovated products used for floor system which synergistically utilizes bamboo and concrete components. These composite beams at cur-rent technology belong to the beam characterized with partial composite action due to the ex-istence of relative slip between bamboo segment and concrete slab. Existing investigations have demonstrated that the load bearing capacity of BCC beams depends on their bending stiffness; however, very limited prediction models are available to accurately estimate the bending stiffness of BCC beams. At present, the bending stiffness of BCC beams is predicted with the help of gamma-method in Eurocode 5-Part 1-1, and available studies have demonstrated that this method overestimates the bending stiffness of BCC beams. To this end, this paper presents a novel explicit model characterized with mechanism and data mining to predict the bending stiffness of BCC beams under short-term loads. Three steps were performed to achieve the aforementioned research objective. The first step was to introduce the axial force transfer coefficient into the equilibrium equations of internal force for bamboo segment and concrete slab. Secondly, the bending stiffness of BCC beams was established by taking into account the effect of relative slip with the help of existing experimental results from the interfacial shear test and flexural test. Finally, the proposed model was validated by comparing with flexural performance results of BCC beams collected from available literature as well as those obtained from gamma-method. The comparative results show that: i) the predicted bending stiffness of BCC beams is much closer to tested ones compared with gamma-method; ii) the errors of proposed model predicting the bending stiffness for most BCC beams are within 10% of test results; however, nearly half of the predicted ones using gamma-method have errors exceeding 10% of test results, both of which verify that the mechanism and data mining-dual driven model receives a better prediction for short-term bending stiffness of BCC beams.

Time-Dependent Flexural Deformations in Composite Prestressed Concrete and Steel Bridge Beams. II: Comparison of Predictions

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Bending Stiffness of Bamboo-Concrete Composite (BCC) Beams under Short-Term Loads

Calculation of Long-Term Slippage for Externally Prestressing Steel-Concrete Composite Beam

Predicting deflection of retrofitted reinforced concrete beams

Fatigue Performance of Prefabricated Composite T‐beams under Cyclic Overloading: an Experimental Study

Prediction of Structural Behavior of Continuous Reinforced Concrete Beams with Hybrid CFRP-Steel Bars

Strength of Multi-Span Composite Beams Subjected to Combined Flexure and Torsion

Time-dependent Behaviour of Concrete-Filled Steel Tubular Columns: Analytical and Comparative Study

Time-dependent response of continuous steel-concrete composite beams under sustained loading

Steel-Concrete Composite Beams Considering Shear Slip Effects

Calculation of Deflection and Stress of Assembled Concrete Composite Beams under Shrinkage and Creep and Its Application in Member Design Optimization

Flexural Capacity Prediction Model for Steel Fibre-Reinforced Concrete Beams

Time-dependant effects on curved precast segmentally constructed balanced cantilever bridges

Long-Term Deflection of Prestressed Concrete Bridge Considering Nonuniform Shrinkage and Crack Propagation by Equivalent Load Approach

Time-dependent creep and shrinkage analysis of curved steel–concrete composite box beams

Long-Term Behavior of Composite Beams under Positive and Negative Bending. Ii: Analytical Study

Flexural performance investigation of steel-concrete composite beams strengthened with prestressed CFRP tendons in the negative bending moment region

Creep and shrinkage in prestressed concrete beams: An experimental study

Numerical Simulation of Engineering Cementitious Composite Beams Strengthened with Fiber-Reinforced Polymer and Steel Bars

Evaluating the Effect of the Compressive Strength Development Factor on Concrete Creep Deformation in Bridge Construction