Abstract:Drop tests of dangerous goods packagings are used to evaluate resistance against damage. Testing requires reaching a defined gross mass, often achieved with additives. Yet, undesired properties or design constraints may lead to mass deviations. Adjusting drop heights is crucial but often overlooked. We developed a test stand for measuring the change in kinetic energy in drop tests to validate FEM models, aiding in adjusting drop heights accurately for varied packaging designs and contents. In the approval process of dangerous goods packagings, drop tests onto a flat, essentially unyielding surface are used to assess resistance against mechanical damage. International adopted regulations like ADR and RID define filling good dependent drop heights and filling degrees whilst the user needs to define the maximum gross mass to be tested and approved. Maximum packaging gross mass is defined conservatively and not reached in practice. To meet the defined gross mass in testing, using additives is permitted. However, in some cases, additives are not desirable due to packaging design or filling substance properties. This leads to deviations from the initial gross mass definition. Hence, a certain drop height adjustment is necessary to achieve the required impact loading. Laboratories frequently adjust drop height assuming a perfectly elastic collision that is inaccurate. Appropriate adjustment is not trivial due to energy conversion processes, for example, plastic deformation. In this work, a test stand is developed for measuring the change in kinetic energy of different packaging designs and filling substances in regulative drop tests. The experimental results are used to validate finite‐element (FE) models so that packaging properties can be varied in simulated drop test scenarios. The findings intend to describe the appropriate drop height adjustment of the respective packaging with same design but deviating gross mass to produce comparable mechanical response. The results are highly beneficial for testing laboratories, approval issuing authorities and packaging institutes confronted with the problem of testing packages with gross masses other than those to be approved.

Simulation and Experiment of Hand-held Vacuum Cleaner Host Drop

Finite Element Analysis of Mechanical Characteristics of Dropped Eggs Based on Fluid-Solid Coupling Theory

Dynamic Substructure Method for Prediction of Solder Joint Reliability of IC Package under Drop Test

Study on Impact Energy Absorption and Adhesion of Biomimetic Buffer System for Space Robots

Cumulative Damage Study of Air-Dropped Vehicles with Multiple Drops Impact

Finite Element Simulation and Analysis of Drop Tests to Improve the Mechanical Design of a Handheld QSTM Medical Device

Simulation of Hard-Soft Material Interaction under Impact Loading Employing the Material Point Method

The Transmission Characteristics and Influence Prediction of Impulsive Vibration Caused by a Solid Metal Ball Impact in Buildings

Failure Analysis of a Drop Tested Wall-Mounted Air Conditioner Indoor Unit: Simulation and Experimental Analysis

Simulation Analysis of Packaging Box for Free Fall Airdrop

Drop damage analysis of automotive high-pressure composite hydrogen storage cylinders

A mini desktop impact test system using multistage electromagnetic launch

Drop Test Simulation of Packaging for Dangerous Goods: An Investigation of Appropriate Drop Height Adjustment in Case of Deviating Packaging Gross Mass

A Novel Impact Tester for in Situ Evaluating the Shock Reliability of Micro-Structures

High-power Impact Experimental Generation Analysis Using Hydraulic Impact Simulation Tester

Research on Landing Dynamics of Foot-High Projectile Body for High-Precision Microgravity Simulation System

Research on impact reduction of flexible boundary particle damping honeycomb plate based on discrete element multi body dynamics coupling

A novel multi-direction high shock reliability test on MEMS devices

Drop Impact Analysis of Cushioning System with an Elastic Critical Component of Cantilever Beam Type

Modeling and experimental study on dynamics of a gas-driven split nut device

Mechanical property and sealing performance analysis of the diaphragm compressor cylinder head for the hydrogen refueling station under the mutation impact load