Abstract:The decreasing feature sizes in complementary metal-oxide semiconductor (CMOS) transistor technology will require the replacement of SiO2 with gate dielectrics that have a high dielectric constant (high-k) because as the SiO2 gate thickness is reduced below 1.4 nm, electron tunnelling effects and high leakage currents occur in SiO2, which present serious obstacles to future device reliability. In recent years significant progress has been made on the screening and selection of high-k gate dielectrics, understanding their physical properties, and their integration into CMOS technology. Now the family of hafnium oxide-based materials has emerged as the leading candidate for high-k gate dielectrics due to their excellent physical properties. It is also realized that the high-k oxides must be implemented in conjunction with metal gate electrodes to get sufficient potential for CMOS continue scaling. In the advanced nanoscale Si-based CMOS devices, the composition and thickness of interfacial layers in the gate stacks determine the critical performance of devices. Therefore, detailed atomicscale understandings of the microstructures and interfacial structures built in the advanced CMOS gate stacks, are highly required. In this paper, several high-resolution electron, ion, and photon-based techniques currently used to characterize the high-k gate dielectrics and interfaces at atomic-scale, are reviewed. Particularly, we critically review the research progress on the characterization of interface behavior and structural evolution in the high-k gate dielectrics by high-resolution transmission electron microscopy (HRTEM) and the related techniques based on scanning transmission electron microscopy (STEM), including high-angle annular darkfield (HAADF) imaging (also known as Z-contrast imaging), electron energy-loss spectroscopy (EELS), and energy dispersive X-ray spectroscopy (EDS), due to that HRTEM and STEM have become essential metrology tools for characterizing the dielectric gate stacks in the present and future generations of CMOS devices. In Section 1 of this review, the working principles of each technique are briefly introduced and their key features are outlined. In Section 2, microstructural characterizations of high-k gate dielectrics at atomic-scale by electron microscopy are critically reviewed by citing some recent results reported on high-k gate dielectrics. In Section 3, metal gate electrodes and the interfacial structures between high-k dielectrics and metal gates are discussed. The electron beam damage effects in high-k gate stacks are also evaluated, and their origins and prevention are described in Section 4. Finally, we end this review with personal perspectives towards the future challenges of atomic-scale material characterization in advanced CMOS gate stacks.

Advanced measurement and diagnosis of the effect on the underlayer roughness for industrial standard metrology

Fabrication and Nanoroughness Characterization of Specific Nanostructures and Nanodevice

Measurement of Sub-Surface Microstructures Based on a Developed Ultrasonic Atomic Force Microscopy

AFM Tip-Based Fabrication of Silicon Nanostructures with Reduced Subsurface Amorphous Layers

Evaluating Interface Effect On Stresses In Thin Films By A Local Curvature Metrology With High Accuracy And Resolution

A strategy to fabricate nanostructures with sub-nanometer line edge roughness

In-situ quantification of the surface roughness for facile fabrications of atomically smooth thin films

An Investigation into the $HfO_2/Si$ Interface: Materials Science Challenges and their Effects on MOSFET Device Performance

Challenges in Atomic-Scale Characterization of High-k Dielectrics and Metal Gate Electrodes for Advanced CMOS Gate Stacks

Study of Roughness Evolution and Layer Stacking Faults in Short-Period Atomic Layer Deposited Hfo2/Al2o3 Multilayers

Challenges in the areal measurement of surface roughness and shape at the micro and nanoscale

Precise Quantification of the Adhesion Between Metallic Thin Films and Silicon Wafer

Wafer-scale characterization for two-dimensional material layers

Achievement of a near-perfect smooth silicon surface

Fundamental Origin of Si Surface Defects Caused by Laser Irradiation and Prevention of Suboxide Formation through High Density Ultrathin SiO 2

Micro 3D Measurement Applied to Interfacial Deformation of Bilayer Thin Film/substrate Structure under Thermal Cycling Loads

A high-resolution non-contact thickness test method of ultra-thin silicon diaphragm

48.1: Inline Low Temperature Polycrystalline Silicon Roughness and Grain Size Metrology Enabled by Electron Beam Review for a Better Process Control of Excimer Laser Annealing

Advances in the Atomic Force Microscopy for Critical Dimension Metrology

A method for measuring and correcting errors in the thickness of semiconductor thin films based on reflection spectroscopy fitting technology

Surface Roughness Analysis of Cu Films Deposited on Si Substrates: A Molecular Dynamic Analysis