Abstract:The objective of the study is the geomechanical characterization of the rock mass rating RMR system and numerical modeling for mining underground excavation design of the Djebel El Ouahch tunnel, in Constantine (Algeria).The geological and geotechnical character- ization of the rock mass is important for the design of underground mining excavations. In this article, we present the results of the RMR characterization of the rock mass and the numerical modeling by the finite element method (FEM), under the conditions of the Djebel El Ouahch tunnel, Constantine (Algeria).The RMR system is a useful tool for characterization of the rock mass quality and establishing the appropriate support system. For poor rock (Class IV), the excavation should be top heading and bench 1.0 m – 1.5 m advance in top heading. Support should be installed concurrently with excavation, 10 m from face. Rock bolting should be systematic with 4 m – 5 m long, spaced 1.5 m – 1.5 m in the crown and walls with wire mesh, Shotcrete of 100 m -150 mm in the crown and 100 mm in sides. The steel sets should be light to medium ribs spaced 1.5 m only when required. The rock mass consists of generally poor rocks with average stand- up time of 10 hours for 2.5m span with mass cohesion ranges between 100 kPa – 200 kPa and rock mass friction angle ranges from 15° to 35°. The FEM project due to its precision calculates the safety factor and evaluates the principal deformations and displacements of the rocks mass .The originality of this work lies in the use of two different approaches , the RMR system and numerical method (FEM) for analyzing the quality and evaluation of the deformations and displace- ments of rock mass .This method has become a very common practice in underground mining excavation design.This study illustrates that the results obtained by RMR of the argillite rock mass in the case is 28.00 ,ranging from 21.0 to 40.0 classified as Class IV (Poor Rock), while the results of FEM reveal that in accordance with the poor quality of the rocks, large deformations and displacements were observed around the underground mining excavation, which can be at the origin of the ruptures. The value of the safety factor of the order of 0.95 to 1.24 shows the instability of the excavation, and the appearance of very considerable hazard zones in the argillite layer.

Rock Mass Classifications of Flysch Deposits for Analyses of Tunnel Behaviour and Support System-A Case Study of Design Evaluation of Tunnel 6 of Jakarta-Bandung High-Speed Railway

Application of RMR, Q, and Japanese Rock Mass Classification Systems for Design of Support Systems of the Narogong Weir Diversion Tunnel, West Java, Indonesia

Rock mass classification for design of excavation method and support system of tunnel 1 Sigli-Aceh toll road, Indonesia

Numerical evaluation of support design: A case study Jakarta – Bandung, Indonesia High-Speed Railway Tunnel 7

System Reliability Assessment for a Rock Tunnel with Multiple Failure Modes

Empirical Evaluation of Rock Mass Rating and Tunneling Quality Index System for Tunnel Support Design

Design of Rock Support in Low Overburden and Hard Rock Conditions with the use of Rock Mass Classification Systems and Numerical Analyses: a Study Based on the Construction of the Hestnes Railway Tunnel, Norway

Performance Evaluation of Tunnel Support System in Jointed Rock Mass by Numerical Simulation: A Case Study

Tunnel Support Validation Using Numerical Modelling: A Case Study from NW, Himalaya, India

Excavation method and support system in the diversion tunnel of Tiga Dihaji Dam, South Sumatera, Indonesia based on the rock mass quality

An Empirical Approach for Tunnel Support Design through Q and RMi Systems in Fractured Rock Mass

Empirical design for the excavation method and support system at tunnel no 2, Bintang Bano irrigation area, West Nusa Tenggara

Geomechanical characterization of rock mass rating and numerical modeling for underground mining excavation design

Optimisation of rock mass quality parameters for the initial geotechnical investigation of a vertical shaft: Gosowong Gold Mine Project Case Study - North Halmahera

Quantitative granitic weathering assessment for rock mass classification optimization of tunnel face using image analysis technique

An Improved Method for Estimating the Strength of Jointed Rock Mass Using Drilling Technology

Dissecting the Robustness of the Rock Mass Classification Methods Used in Jiaozhou Bay Subsea Tunnel

Tunnel support design in fault zone in hydropower project in the Nepal Himalaya: a case study

Study on Dynamic Classification of Rock Mass of Mountain Tunnel during Construction

Development of correlations between various engineering rockmass classification systems using railway tunnel data in Garhwal Himalaya, India

Geological Mapping and Stand-up Time Estimation based on Core Drilling Evaluation using Rock Mass Rating Method on The Main Spillway and Diversion Tunnel at Manikin Dam, Kupang Regency, Nusa Tenggara Timur