Abstract:The objective of the study is the geomechanical characterization of the rock mass rating RMR system and numerical modeling for mining underground excavation design of the Djebel El Ouahch tunnel, in Constantine (Algeria).The geological and geotechnical character- ization of the rock mass is important for the design of underground mining excavations. In this article, we present the results of the RMR characterization of the rock mass and the numerical modeling by the finite element method (FEM), under the conditions of the Djebel El Ouahch tunnel, Constantine (Algeria).The RMR system is a useful tool for characterization of the rock mass quality and establishing the appropriate support system. For poor rock (Class IV), the excavation should be top heading and bench 1.0 m – 1.5 m advance in top heading. Support should be installed concurrently with excavation, 10 m from face. Rock bolting should be systematic with 4 m – 5 m long, spaced 1.5 m – 1.5 m in the crown and walls with wire mesh, Shotcrete of 100 m -150 mm in the crown and 100 mm in sides. The steel sets should be light to medium ribs spaced 1.5 m only when required. The rock mass consists of generally poor rocks with average stand- up time of 10 hours for 2.5m span with mass cohesion ranges between 100 kPa – 200 kPa and rock mass friction angle ranges from 15° to 35°. The FEM project due to its precision calculates the safety factor and evaluates the principal deformations and displacements of the rocks mass .The originality of this work lies in the use of two different approaches , the RMR system and numerical method (FEM) for analyzing the quality and evaluation of the deformations and displace- ments of rock mass .This method has become a very common practice in underground mining excavation design.This study illustrates that the results obtained by RMR of the argillite rock mass in the case is 28.00 ,ranging from 21.0 to 40.0 classified as Class IV (Poor Rock), while the results of FEM reveal that in accordance with the poor quality of the rocks, large deformations and displacements were observed around the underground mining excavation, which can be at the origin of the ruptures. The value of the safety factor of the order of 0.95 to 1.24 shows the instability of the excavation, and the appearance of very considerable hazard zones in the argillite layer.

Performance Evaluation of Tunnel Support System in Jointed Rock Mass by Numerical Simulation: A Case Study

System Reliability Assessment for a Rock Tunnel with Multiple Failure Modes

Empirical Evaluation of Rock Mass Rating and Tunneling Quality Index System for Tunnel Support Design

Numerical Analysis of Mechanical Response Characteristics of Jointed Tunnel Surrounding Rock under Dynamic Loading

Geomechanical characterization of rock mass rating and numerical modeling for underground mining excavation design

Tunnel Support Validation Using Numerical Modelling: A Case Study from NW, Himalaya, India

An Empirical Approach for Tunnel Support Design through Q and RMi Systems in Fractured Rock Mass

Numerical evaluation of support design: A case study Jakarta – Bandung, Indonesia High-Speed Railway Tunnel 7

Slope Stabilization of Twin-Tubes Tunnel Portal by Anchor Bolts Support System

A methodology for damage evaluation of underground tunnels subjected to static loading using numerical modeling

Investigation of Rock Mass Stability Around the Tunnels in an Underground Mine in USA Using Three-Dimensional Numerical Modeling

Analytical and Numerical Study of the Mechanics of Rockbolt Reinforcement around Tunnels in Rock Masses

Study on Discrete Fracture Network Model and Rock Mass Quality Evaluation of Tunnel Surrounding Rock

Designing Tunnel Support in Jointed Rock Masses Via the DEM

Twin earth pressure balance tunneling – Monitoring and numerical study of a soft soil urban case

Numerical Simulation of Rock Mass Structure Effect on Tunnel Smooth Blasting Quality: A Case Study

Numerical Modeling of Stand-Up Time of Tunnels Considering Time-Dependent Deformation of Jointed Rock Masses

Numerical Simulation of the Stability of Rock Mass around Large Underground Cavern

The study on bolt support reinforcement mechanism to jointed rock tunnels with numerical simulation

Stability Analysis of Tunnel Rock Mechanical Parameters Based on Multi-Source Sensor Data Fusion

Failure Performance of 3DP Physical Twin-Tunnel Model and Corresponding Safety Factor Evaluation