Abstract:A comprehensive modeling framework for the thermoforming of polymer matrix woven laminate composite was developed. Two numerical indicators, the slip path length and traction magnitude, have been identified to be positively correlated to matrix smearing and wrinkling defects. The material model has been calibrated with picture-frame experimental results, and the prediction accuracy for intra-ply shear and thickness distribution was examined with measurements of the physically formed parts. Specifically, thickness prediction for most locations on the formed parts was accurate within an 11.6% error margin. However, at two points with significant intra-ply shear, the prediction errors increased to around 20%. Finally, a parametric study was conducted to determine the relationship between various process parameters and the quality of the formed part. For the trapezoidal part, orienting the laminate at 45 degrees to the mold axis reduces the likelihood of matrix smear and wrinkling defects. Although this laminate orientation yielded a greater spatial variation in part thickness, the thickness deviation is lower than that for the 0-degree orientation case. Two forming analyses were conducted with ramp rates of 25 mm/s and 80 mm/s to match the equipment's operational limits. It was observed that higher forming rates led to a greater likelihood of defects, as evidenced by a 15% and 10% increase in the formed part areas with longer slip paths and higher traction magnitudes, respectively. It was discovered that shallower molds benefit from faster ramp rates, while deeper molds require slower rates to manage extensive shearing, stretching and bending. Faster forming rates lead to smaller thickness increases at high intra-ply shear regions, indicating a shift from intra-ply shear to out-of-plane bending due to the visco-plastic effect of the molten laminate and can negatively impact part quality. Lastly, it was shown that a well-conceived strategy using darts could improve the part quality by reducing the magnitude of the defect indicators.

Thermoforming simulation of heat conductive plastic materials using the K-BKZ model

A Predictive Parameter for the Shape Memory Behavior of Thermoplastic Polymers

On the relevance of modeling viscoelastic bending behavior in finite element forming simulation of continuously fiber reinforced thermoplastics

Numerical Modelling of the Thermoforming Behaviour of Thermoplastic Honeycomb Composite Sandwich Laminates

A viscoelastic–viscoplastic modeling approach for amorphous polymers in vacuum forming simulation

Validation of a temperature-dependent elasto-viscoplastic material model for a talcum-filled polypropylene/polyethylene co-polymer using glove box flap component tests

Experimental and numerical investigations on thermoforming of thermoplastic prepregs of glass fiber reinforced nylon 6

An experimental validation study of a numerical modeling approach to predicting post-consolidation dimensions of thermoplastic composites

Temperature-Dependent modelling of tension, in-Plane shear, and bending behaviour in non-isothermal thermo-Stamping process simulation of unidirectional UHMWPE fibre reinforced thermoplastic TPU composites

A Novel Multi-Region, Multi-Phase, Multi-Component-Mixture Modeling Approach to Predicting the Thermodynamic Behaviour of Thermoplastic Composites during the Consolidation Process

Investigation of thermoforming processes of aerostructures: Simulation and microstructural analysis

Development and Application of a Cooling Rate Dependent PVT Model for Injection Molding Simulation of Semi Crystalline Thermoplastics

Validation of shape change predictions for stamp forming of carbon fiber thermoplastic composite laminates

A Modeling Framework for the Thermoforming of Carbon Fiber Reinforced Thermoplastic Composites

A method for validation of finite element forming simulation on basis of a pointwise comparison of distance and curvature

Effects of Thermoforming Parameters on Woven Carbon Fiber Thermoplastic Composites

Warpage of Injection-Molded Thermoplastics Parts: Numerical Simulation and Experimental Validation

Injection molding simulation of short fiber reinforced thermosets with anisotropic and non-Newtonian flow behavior

Multi-scale finite element simulation of the thermoforming of a woven fabric glass fiber/polyetherimide thermoplastic composite

Thermal Analysis of Cylindrical Molds Using Thermoplastic Composite During Robotic Fiber Placement

Experimental Verification of a Benchmark Forming Simulation