Abstract:The CoCrFeMnNi high‐entropy alloy powder, produced through gas atomization, is introduced into a graphite die measuring 40 mm in diameter. Spark plasma sintering (SPS) is engrossed at a vacuum pressure of 0.001 Pa on HP D 25/3 SPS apparatus. These laser parameters commonly encompass factors such as scanning speed, layer thickness, and laser power, which play pivotal roles in shaping the final product's quality and properties. High‐entropy alloys (HEAs) are gaining attention for their exceptional properties but achieving precision and surface quality in powder metallurgy (PM) can be challenging. This study investigates the mechanical properties of CoCrFeNiMn HEAs produced through the flake powder metallurgy (FPM) technique and laser powder bed fusion (LPBF) preservative industrial, which established outstanding antiwear properties. To assess the enhancement of mechanical behavior and wear resistance by incorporating boron nitride (BN) into CoCrFeNiMn composites is fabricated via FPM. By incorporating BN into the composites, the mechanical behavior is significantly enhanced, leading to improved resistance against wear. Furthermore, the study delivers comprehensions into the serration behavior microstructure and shear localization in a high‐strain‐rate‐deformed CoCrFeMnNi entropy‐high alloy produces through metallurgy in powder. The serration behavior of the CoCrFeMnNi HEA is discussed concerning strain rate and temperature. Accordingly, the study employs the LPBF technique to fabricate the CoCrFeMnNi alloy from the prepared flakes. Microstructural characterization using scanning electron microscopy and X‐ray diffraction techniques to explore phase distribution, grain size, and possible segregation in the CoCrFeMnNi alloy produced through FPM‐LPBF is performed. In this particular investigation, a gradient microstructure is achieved through fusion in a laser‐powder bed of CoCrFeMnNi HEA onto highly deformed equal‐atomic HEA sheets. The resulting combination of partially recrystallized regions, exhibiting elevated yield strength, and fully recrystallized regions, demonstrates enhanced strain hardenability and elongation, and yields superior mechanical properties. The results obtained from the FPM‐LPBF CoCrFeMnNi alloy will be compared with those of conventionally processed CoCrFeMnNi to highlight the advantages and improvements achieved through the proposed method. The study findings reveal that the fundamental understanding of HEAs' behavior under LPBF with FPM affords valuable insights into optimizing the processing parameters and achieving superior mechanical attributes.

Boronizing of CoCrFeMnNi High-Entropy Alloys Using Spark Plasma Sintering

Effect of Submicron SiC Particles on the Properties of Alcocrfeni High Entropy Alloy Coatings

Effect of Boronizing on the Microstructure and Mechanical Properties of CoCrFeNiMn High-Entropy Alloy

Mechanical properties of nanostructured CoCrFeNiMn high-entropy alloy (HEA) coating

Investigating the Effects of Boron Nitride on Mechanical Properties of CoCrFeNiMn Composites

Effect of Boron Coating on Rockwell-C Adhesion and Corrosion Resistance of High Entropy Alloys

Effects of Boron Content on Microstructure and Wear Properties of FeCoCrNiBx High-Entropy Alloy Coating by Laser Cladding

Promoting the sintering densification and mechanical properties of gas-atomized high-entropy alloy powder by adding boron

Preparation of CrCoFeNiMn High-Entropy Alloy Coatings Using Gas Atomization and Laser Cladding: An Investigation of Microstructure, Mechanical Properties, and Wear Resistance

Microstructure evolution and properties of Fe-Ni-Cr-Co-Mo-W high-entropy alloy coatings by plasma surface alloying technology

Investigation on the robust boronizing strategy for the surface strengthening of CoCrNi medium-entropy alloy

Structure and Properties of a High-Entropy AlCrFeCoNi Alloy after Treatment with an Electron–Ion Plasma

Non-Metallic Alloying Constituents to Develop a Wear-Resistant CrFeNi-BSiC High-Entropy Alloy for Surface Protective Coatings by Thermal Spraying and High-Speed Laser Metal Deposition

Microstructure and mechanical properties of CoCrFeNiTa high entropy alloy prepared by mechanical alloying and spark plasma sintering

Significant Improvement in Wear Resistance of CoCrFeNi High-Entropy Alloy via Boron Doping

Fabrication of High-Entropy Alloys Using a Combination of Detonation Spraying and Spark Plasma Sintering: A Case Study Using the Al-Fe-Co-Ni-Cu System

Microstructure and high-temperature oxidation resistance of in-situ Al 2 O 3 reinforced AlCrFeTiV high-entropy alloy with boron microalloying

A novel and sustainable method to develop non-equiatomic CoCrFeNiMox high entropy alloys via spark plasma sintering using commercial commodity powders and evaluation of its mechanical behaviour

Enhancing mechanical properties of the boron doped Al0.2Co1.5CrFeNi1.5Ti0.5 high entropy alloy via tuning composition and microstructure

Structure and properties of Fe40Mn20Cr20Ti10Al10 high-entropy alloy fabricated by mechanical alloying and spark plasma sintering

Superior hydrogen embrittlement resistance of CoCrNi-based medium-entropy alloy via coherent precipitation and grain boundary strengthening