Abstract:Porous activated carbon with a ultrahigh specific surface area (3164 m2 g−1) and large pore volume (1.88 cm3 g−1) was prepared from waste litchi shells with channel-like macropores via a KOH activation method. The macroporous structure of litchi shells is believed to be conducive to distribute the activation agent, which enables sufficient activation. The as-prepared activated carbon was developed as a conducting framework for lithium–sulfur battery cathode materials. The resulting activated carbon/sulfur composite cathode possesses a high specific capacity, good rate capability, and long-term cycling performance. At 200 mA g−1 current density, the initial discharge capacity of the activated carbon/sulfur composite cathode with 60 wt% sulfur content is 1105 mA h g−1. At a current density of 800 mA g−1, the activated carbon/sulfur composite cathode shows 51% capacity retention over 800 cycles with a fade rate of 0.06% per cycle. The coulombic efficiency of the cell remains at approximately 95%. By adding LiNO3 in the electrolyte, the activated carbon/sulfur composite electrode tested at 800 mA g−1 shows a high coulombic efficiency (>99%). The activated carbon/sulfur composites exhibited similar capacity value and cycling trends with an increase in sulfur content from 60% to 68%. The good electrochemical performance can be attributed to the excellent structural parameters of the activated carbon. The ultrahigh specific surface area and large pore volume not only enhances the sulfur content but also ensures dispersion of elemental sulfur in the conducting framework, thereby improving sulfur utilization. The small nanopores of the activated carbon can effectively inhibit the diffusion of polysulfides during the charge/discharge process.

Preparation of activated carbon derived from biomass and its application in lithium–sulfur batteries

Biomass-Derived Activated Carbon for Rechargeable Lithium-Sulfur Batteries

Activated Carbon with Ultrahigh Specific Surface Area Synthesized from Natural Plant Material for Lithium–sulfur Batteries

Pistachio Shell-Derived Carbon Activated with Phosphoric Acid: A More Efficient Procedure to Improve the Performance of Li-S Batteries

Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery

In Situ Synthesis of Li2S‐Loaded Amphiphilic Porous Carbon and Modification of the Li2S Electrode for Long‐Life Li2S Batteries

High Sulfur Loading in Activated Bamboo-Derived Porous Carbon As a Superior Cathode for Rechargeable Li–S Batteries

Cellulose Substance Derived Nanofibrous Activated Carbon As a Sulfur Host for Lithium-Sulfur Batteries

Green biomass-derived hierarchically porous non-activated carbon from carob waste for high-performance lithium-sulfur batteries

Biomass-Derived Porous Carbon with Micropores and Small Mesopores for High-Performance Lithium-Sulfur Batteries

Optimized Assembly of Micro-/Meso-/Macroporous Carbon for Li–S Batteries

Diffusional Features of a Lithium-Sulfur Battery Exploiting Highly Microporous Activated Carbon

Microporous Bamboo Biochar for Lithium-Sulfur Batteries

Biomass-derived high value-added porous carbon as the interlayer material for advanced lithium–sulfur batteries

Activated Carbon-Decorated Spherical Silicon Nanocrystal Composites Synchronously-Derived from Rice Husks for Anodic Source of Lithium-Ion Battery

Biomass Waste Inspired Highly Porous Carbon for High Performance Lithium/Sulfur Batteries

Porous Carbon Nanofiber Paper As an Effective Interlayer for High-Performance Lithium-Sulfur Batteries

Edge-functionalized Acetylene Black Anchoring Sulfur for High-Performance Li–S Batteries

Porous Coconut Shell Carbon Offering High Retention and Deep Lithiation of Sulfur for Lithium-Sulfur Batteries

A Simple Pyrolysis of Bio-Wastes to Prepare N, and P Co-Doped Porous Carbon for Lithium-Sulfur Batteries

Almond Shell as a Microporous Carbon Source for Sustainable Cathodes in Lithium⁻Sulfur Batteries