Abstract:Cr doped diamond-like carbon (DLC) coating was deposited on the carburized Ti6Al4V alloy (TA) by magnetron sputtering (MS). The physical and chemical characteristics of Cr doped DLC coating were obtained using scanning electron microscope, energy dispersive spectroscope, Raman spectrometer, X-ray photoelectron spectroscopy and Fourier transform infrared, and the mechanical property and adhesion force were analyzed by nanoindenter and scratch tester. The effects of carburizing treatment on the coefficient of friction (COF) and wear mechanism of Cr doped DLC coatings were investigated on a ball-on-disk tribometer. The results show that the adhesion force and mechanical property of Cr doped DLC coating deposited on the carburized TA are higher than those deposited on the original TA. The average coefficients of friction (COFs) of Cr doped DLC coatings deposited on the original and carburized TAs under the dry-friction condition are 0.157 and 0.143, respectively, showing that the carburizing treatment has the obvious effect of friction reduction for the Cr doped DLC coating. The wear mechanism of Cr doped DLC coating deposited on the carburized TA is combined action of abrasive wear and adhesive wear, which are contributed to the enhancement of mechanical property of Cr doped DLC coating by carburization treatment. Furthermore, the average COFs of Cr doped DLC coatings deposited on the original and carburized TAs under the oil-lubrication condition are 0.152 and 0.131, respectively, which are superior to those under the dry-fiction condition. The carburizing treatment promotes the formation of self-repairing carbonyl of Cr doped DLC coating, and the oil-wet characteristic of Cr doped DLC coating with the aromatic aldehyde of CO as the functional group plays the main role of friction reduction.

Tribological performance and corrosion behavior of aluminum alloy protected by Cr-doped diamond-like carbon thin film

Diamond-like Carbon Film on 20 CrNiMo Steel Prepared by Hollow-Cathode Glow Discharge

Tribological Behavior of Chromium Alloyed Layer Prepared on Surface of TiAl

Tribological Performance of Metal Doped Diamond-like Carbon Films Deposited on CoCrMo Alloy

Tribological and Corrosion Behaviors of Zr-doped Graphite-Like Carbon Nanostructured Coatings on Ti6Al4V Alloy

Improvement in Anti-Corrosion Property of Hydrogenated Diamond-Like Carbon Film by Modifying Crc Interlayer

Enhanced tribological and corrosion properties of DLC/CrN multilayer films deposited by HPPMS

Tribological Behavior of Diamond Like Carbon Film Sliding Against Cocrmo or Al2o3 in Air and Water Environment

Comparative study on microstructure, bio-tribological behavior and cytocompatibility of Cr-doped amorphous carbon films for Co-Cr-Mo artificial lumbar disc

Tribological Properties of Graded Diamond-Like Carbon Films on Ti Ion-Implanted Aluminum Substrate

Excellent Mechanical, Tribological and Anti-Corrosive Performance of Novel Ti-DLC Nanocomposite Thin Films Prepared Via Magnetron Sputtering Method

Improved tribological properties and corrosion protection of CrN coating by ultrathin composite oxide interlayer

Influence of Cr Contents and Nanograin Sizes on Microstructure, Mechanical and Sliding Tribological Behaviors of Hard Cr-Diamond-Like Carbon Films

Tribological Properties of Graded Metal-doped and Nanoscale Multilayered Modulation Diamond-like Carbon Films

Comparative study on mechanical and tribological properties of Cr–Al–N and Cr–Al–O coatings deposited by cathodic arc evaporation

Structure and Anticorrosion, Friction, and Wear Characteristics of Pure Diamond-Like Carbon (DLC), Cr-DLC, and Cr-H-DLC Films on AZ91D Mg Alloy

Effect of carburizing treatment on microstructural, mechanical and tribological performances of Cr doped DLC coating deposited on Ti6Al4V alloy

Study on Comparative Experiments of Performance of Conventional and Nanocrystalline Diamond Film

Tribological, Anti-Corrosive Properties and Biocompatibility of the Micro- and Nano-Crystalline Diamond Coated Ti6al4v

Tribo-mechanism of Amorphous Carbon Films under Corrosion Solution and Various Mechanical Loads

Enhancing tribological performance of graphene sheet-embedded carbon films on steel substrates via texture engineering and chromium doping