Abstract:<p>Waste minimization is a major approach whereby many industries decrease environmental pollution and promote cleaner production. To achieve sustainable development, a novel idea is proposed herein to recycle magnesium slag (MS) and high-calcium fly ash (FA) into cementitious materials which are then mixed with aeolian sand (AS) to produce a type of paste backfill (MFPB) material that can be used in the mining industry. The rheological and mechanical properties of backfill materials with different FA contents were investigated. The results reveal that: (1) fresh MFPB mortars with different proportions conformed to the Herschel–Bulkley model. The yield stress initially decreased, and then increased with rising FA content. When the FA content was less than 20 wt%, the rheology of the MFPB surpassed that of the pure MS mortar, and an FA content of 10 wt%, yielded the best rheological properties of the fresh MFPB mortar. The mini-slump value, which was between 108 mm (MS-FA0) and 141 mm (MS-FA10), first increased and then decreased with increasing FA content. (2) The unconfined compressive strength (UCS) increased with extended curing times and FA contents, as well as the early-age strength development, which accelerated with increasing FA content. The UCS at 28 d escalated from 2.607 MPa (MS-FA0) to 7.491 MPa (MS-FA40). (3) The microstructure of the MFPB samples was discovered to agree with the UCS results. X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) were conducted to investigate the hydration products of the MFPB samples. The hydration mechanism of the MS and FA mixture was discussed, and the former was less reactive when used individually, although its reactivity increased with the addition of high-calcium FA. CaO dissolution in the MS and FA led to the generation of Ca(OH)<sub>2</sub>, which was a prerequisite for the successive pozzolanic reaction between the MS and FA. This study investigated the feasibility of the co-disposal of MS and FA, which could significantly promote a cleaner mineral production, and mining industry, when used together with backfill technology.</p>

Fly Ash/Blast Furnace Slag-Based Geopolymer as a Potential Binder for Mine Backfilling: Effect of Binder Type and Activator Concentration

Setting and Hardening Behaviour of Alkali-Activated Landfilled Fly Ash–Slag Binder at Room Temperature

Properties and Cementation Mechanism of Geopolymer Backfill Paste Incorporating Diverse Industrial Solid Wastes

Performance Optimization and Characterization of Soda Residue-Fly Ash Geopolymer Paste for Goaf Backfill: Beta-Hemihydrate Gypsum Alternative to Sodium Silicate

Preparation and curing method of red mud-calcium carbide slag synergistically activated fly ash-ground granulated blast furnace slag based eco-friendly geopolymer

Feasibility of using fly ash–slag-based binder for mine backfilling and its associated leaching risks

Preparation of fly ash-granulated blast furnace slag-carbide slag binder and application in total tailings paste backfill

Mechanical behavior and microstructure evolution of slag-fly ash based geopolymer stabilized sand

The Impact of Fly Ash on the Properties of Cementitious Materials Based on Slag-Steel Slag-Gypsum Solid Waste

Alkali-activated binder based on red mud with class F fly ash and ground granulated blast-furnace slag under ambient temperature

Hydration and Hardening Properties of High Fly-Ash Content Gel Material for Cemented Paste Backfill Utilization

Low-carbon wet-ground fly ash geopolymer activated by single calcium carbide slag

A novel binder prepared from municipal solid waste incineration fly ash and phosphogypsum

The Use of Recycled Aggregate Sludge for the Preparation of GGBFS and Fly Ash Based Geopolymer

Co-disposal of magnesium slag and high-calcium fly ash as cementitious materials in backfill

Experimental study on full-volume fly ash geopolymer mortars: Sintered fly ash versus sand as fine aggregates

Properties and environmental impact of building foundation pit backfilling materials containing iron and steel solid waste

Solidification of (Pb–Zn) mine tailings by fly ash-based geopolymer I: influence of alkali reagents ratio and curing condition on compressive strength

In-Depth Insight into the Effects of Steel Slag and Calcium Hydroxide on the Properties of a Fly Ash-Red Mud Geopolymer

Preparation of backfill materials by solidifying municipal solid waste incineration fly ash with slag-based cementitious materials

Preparation and Properties of Expansive Backfill Material Based on Municipal Solid Waste Incineration Fly Ash and Coal Gangue