Abstract:The paper is concerned with the evaluation of laser-treated cementitious surfaces. It is part of a bigger investigation into the laser cleaning procedure and its impact on the change of the Nano particles of cementitious composites and concrete member structures. Because of the wide range of absorptivity of highly developed surfaces of concrete members and cementitious materials, their reactions to laser irradiation varied significantly. Even while laser could effectively remove the particles from the surface of concrete members, there are usually some residual surface modifications related with mortar removing, fracture development, and glazing (melted mortar). In this study, a large amount of thermal stress is created with low power densities (300 W/cm 2 ) and large spot sizes (50 mm) that promote structural concrete member cracking. By raise of power density, the cement matrix material melts make the thermal ablation mode ineffective. This procedure is also heavily influenced by the beam diameter to aggregate size rate. As a result, due to stable size of aggregate, the procedure is not scalable. In this study, the findings of ablation experiments on cement and concrete member specimens performed with a Yb-fiber laser with a power of 1 kW and a focused beam width of 800 m have been delivered through fiber optic beam delivery. In order to know the influence of substrate composition on ablation ratio and processes, the laser–surface interaction was examined on type I Portland cement with varying amounts of sand or fine silica. The primary objective is to maximize the material removal rate (MRR) and aspect proportion of alumina, stainless steel, and chromium (Cr). The goal of this study is to use an adaptive neural fuzzy inference system (ANFIS) to categorize the multiple input variables for MRR and ratios based on process variables. Scanning speed, annealing temperature, laser power, and laser frequency are all input parameters. The prediction might be crucial in determining the ideal circumstances for micro and Nano architectures of concrete members created by laser ablation. According to the data, annealing power has the greatest impact on aspect ratio, whereas micro structure width has the most effect on MRR. Analysis revealed that contaminants of alumina, stainless steel, and chromium (Cr) were highly segregated into distinct areas of the aerosol's particle size distribution.

Detoxification and scattering suppression of asbestos-containing material using a laser beam

Investigation of aerosol generation through laser cleaning of various surfaces and optimization of mist & spray scavenging

Solid tumor conical scattering laser therapeutical system

Traceless Mitigation of Laser Damage Precursors on a Fused Silica Surface by Combining Reactive Ion Beam Etching with Dynamic Chemical Etching

Quantitative Analysis of Asbestos in Drinking Water and Its Migration in Mice Using Fourier-Transform Infrared Spectroscopy and Inductively Coupled Plasma Optical Emission Spectrometry

An Efficient Laser Decontamination Process Based on Non-Radioactive Specimens of Nuclear Power Materials

Monte Carlo/molecular Dynamics Simulation on Melting and Evaporating Processes of Material Due to Laser Irradiation

On-site detection of asbestos at the surface of building materials wasted at disaster sites by staining

Development of a testing method for asbestos fibers in treated materials of asbestos containing wastes by transmission electron microscopy

Safety Verification of Femtosecond Laser Cutting of Tungsten Alloys During the Dismantling of Decommissioned Energetic Materials

Activities on the Laser Fusion Reactor Koyo-F in Japan

Sustainable management of hazardous asbestos-containing materials: Containment, stabilization and inertization.

Study on the Fast Elimination of Smoke Particle Based on Electro-Acoustic Coupling Agglomeration Technology

Quantifying asbestos fibers in post-disaster situations: Preventive strategies for damage control

Laser Mass Spectrometry: Rapid Analysis of Polychlorinated Biphenyls in Exhaust Gas of Disposal Plants

Lasers for Lithotripsy

Mitigation of Contamination and Health Risk: Asbestos Management and Regulatory Practices

Analysis of nano-particle release from the surface of structural concrete members by laser ablation using soft computing

Development of an automated asbestos counting software based on fluorescence microscopy

A State-of-the-Art Review of Radioactive Decontamination Technologies: Facing the Upcoming Wave of Decommissioning and Dismantling of Nuclear Facilities

Application of Non-Thermal Plasmas on Toxic Removal of Dioxin-Contained Fly Ash