Abstract:Municipal solid wastes incineration (MSWI) is a commonly accepted solution in Japan for waste management by municipalities. The main products after incineration are bottom ash (BA) and fly ash (FA). The fly ash is cargorized as hazardous waste owing to high contents of heavy metals and toxic organic compounds like dioxin. It is necessary to take some immobilization treatment before landfill disposal of fly ash. The major treatment method in Japan is organic treatments such as chelating treatment. In this process, the authors found secondary mineral formations on fly ash surfaces. Because chelate reagents for organic treatment can be decomposed within several years and cause high concentraions of organic carbon in landfill leachate, this research focuses on inorganic treatments for stable immobilize of toxic elements. In this study, MSWI fly ash sample was collected from a Japanese MSWI facility plant. Materials used in this research are chelate-treated MSWI fly ash, and three kinds of inorganic reagents. They are sodium carbonate (0.01mol/L), sodium phosphate (0.01mol/L) and sodium sulfate (0.01mol/L). In organic treatment, sodium solutions were mixed with fly ash at the solid to liquid (L/S) ratio of 1. Moistened samples were dried at room temperature about 20 °C for about 5 days. X-Ray Diffraction (XRD) method was used to detect major secodaiy minerals. Scanning Electron Microscope (SEM) was used to observe the surface morphology of fly ash particles and Energy Dispersive X-Ray analyzer (EDX) equipped with SEM was used to measure elemental distribtuions of fly ash particle surfaces. According to the experiment results of XRD, the main crystals were sylvite, halite, anhydrite, gypsum, calcite and quartz. There is no significant difference bteween raw and inorganic-treated MSWI fly ash. It suggests that inorganic treatment did not promote secondary mineral formations which were detecable by XRD. SEM-EDX analysis showed that raw, chelate-treated and inorganic-treated MSWI fly ash particles consist mainly of Na, K, Cl, Ca, Al, and Si. According to SEM observations, significant differences of surface morphology of fly ash after inorganic treatment were not found in spite of chelate-treated MSWI fly ash. Although inomgaic treatments were expected to promote the formations of calcite (CaCO3), gypsum (CaSO4·2H2O) and apatite (Ca5(PO4)3(OH)2), experimental conditions should be improved in particular water content, pH, and reaction time.

Development of a testing method for asbestos fibers in treated materials of asbestos containing wastes by transmission electron microscopy

Quantitative Analysis of Asbestos in Drinking Water and Its Migration in Mice Using Fourier-Transform Infrared Spectroscopy and Inductively Coupled Plasma Optical Emission Spectrometry

Transmission electron imaging and diffraction of asbestos fibers in a scanning electron microscope

On the threshold conditions for electron beam damage of asbestos amosite fibers in the transmission electron microscope (TEM)

Microwave-Assisted Hydrothermal Treatment with Soluble Phosphate Added for Heavy Metals Solidification in MSWI Fly Ash

On-site detection of asbestos at the surface of building materials wasted at disaster sites by staining

Heavy Liquid Separation Method for Enhancement of Trace Asbestos Detection

Increasing of the unit capacity of MF process at Miike Smelter

Methodological steps forward in toxicological in vitro screening of mineral wools in primary rat alveolar macrophages and normal rat mesothelial NRM2 cells

Quantifying asbestos fibers in post-disaster situations: Preventive strategies for damage control

Investigation of the Tendency of Carbon Fibers to Disintegrate into Respirable Fiber-Shaped Fragments

Development of a dissolution method for analyzing the elemental composition of fuel debris using sodium peroxide fusion technique

Characterisation of asbestos-containing wastes by thermal analysis

Development of an asymmetric composite PPS-based bag-filter material through membrane laminating and superfine fiber blending: Lab test, field application and development of numerical models

Preliminary Observations of Surface Morphology of Municipal Solid Waste Incineration Fly Ash Particles Treated by Sodium Carbonate, Sulfate, and Phosphate

Analysis of PCBs in Five Kinds of Fly Ash Using Microwave-Assisted Extraction

Sample preparation method for visualization of nanoparticulate captured on mixed cellulose ester filter media by enhanced darkfield microscopy and hyperspectral imaging

Systematization of a toxicity screening method based on a combination of chemical analysis and the delayed fluorescence algal growth inhibition test for use in emergency environmental surveys

Thermal synergistic treatment of municipal solid waste incineration (MSWI) fly ash and fluxing agent in specific situation: Melting characteristics, leaching characteristics of heavy metals

An Experimental Study on the Melting Solidification of Municipal Solid Waste Incineration Fly Ash

Experimental Study on Thermal Treatment of Dioxins in Fly Ash from Medical Waste Incinerator