Abstract:The study examined building materials containing asbestos, which have been considered hazardous waste for several years. Samples were taken from various places in Poland. The chemical composition was examined using chemical analysis, the mineralogical phases were identified using X-ray diffraction, and the structure was identified using scanning electron microscopy, taking into account energy-dispersive spectroscopy. Thermal tests of the samples were performed using thermal analysis, thermogravimetric measurements and high-temperature microscopy. Additionally, changes that occurred in the microstructure were determined using mercury porosimetry and infrared spectroscopy. All the above research methods were used to characterise the properties of cement–asbestos materials, which were also subjected to isothermal thermal treatment at a temperature of 1100 °C for 4 h. The results proved that the material after thermal treatment undergoes significant structural changes. The thermal decomposition process of cement–asbestos involves dehydration, dehydroxylation and then recrystallisation to new stable crystalline phases but in the context of asbestos, we are dealing here with the so-called phenomenon of pseudomorphosis. Knowledge about the thermal properties of asbestos materials can provide us with data on how the material undergoes significant structural changes, thanks to which it will be possible to use neutralised cement–asbestos waste as possible safe materials.

What problem does this paper attempt to address?

The paper mainly discusses the thermal characteristics and phase transition process of asbestos-containing waste, aiming to find methods for handling and converting these hazardous wastes. The study focuses on cement asbestos materials widely used in the construction industry, which are considered harmful waste due to the presence of asbestos. Asbestos is a known carcinogen, making its handling and disposal an important environmental and health issue. In the paper, researchers collected samples of five types of cement asbestos roofing materials from different regions in Poland and conducted comprehensive characterization of the samples using methods such as chemical analysis, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). In particular, they focused on the behavior of these materials at high temperatures, such as isothermal heat treatment at 1100°C. The experimental results showed significant structural changes in the materials due to the heat treatment, including dehydration, dehydroxylation, and the formation of new stable crystalline phases. This phenomenon, known as pseudomorphosis, is particularly evident in asbestos, where the newly formed minerals retain the external morphology of the original asbestos fibers but have completely changed internal structures, causing the fibers to lose strength, become more brittle, and easily break into new spherical silicate particles. The study also found that during the thermal decomposition process, asbestos in asbestos cement waste transforms into other mineral phases such as wollastonite (Ca2SiO4) and monticellite (Ca3Mg(SiO4)2), and the presence of calcium carbonate promotes the formation of calcium silicates, accelerating the decomposition reaction. Furthermore, the infrared spectra of the materials after heat treatment showed the disappearance of characteristic peaks of asbestos and carbonate, further confirming the decomposition of asbestos minerals. In conclusion, the paper attempts to address how to safely transform and utilize asbestos-containing waste through thermal treatment methods to reduce its threat to the environment and human health, and explores the possibility of reusing the treated materials as potential safe materials. This not only helps alleviate the pressure of waste management but also aligns with the concepts of circular economy and sustainable development.

Characterisation of asbestos-containing wastes by thermal analysis

Thermal decomposition of different types of asbestos

Efficient Management of Asbestos Waste Through Utilization as Mineral Additives in Portland Cement Production

Modern Methods of Asbestos Waste Management as Innovative Solutions for Recycling and Sustainable Cement Production

Asbestos cement products and their impact on soil contamination in relation to various sources of anthropogenic and natural asbestos pollution

Crystal chemistry of the high temperature product of transformation of cement-asbestos

Thermal removal of binder from waste glass wool intended for recycling

Destructive Effects of Slag from Municipal Waste Incineration Plants on Cement Composites

Identification of asbestos fibres from soil sediments in the Pilsen region of the Czech Republic and the impact of these minerals on the health of the local population

Hazardous waste in the Anthropocene: The comparative methods for asbestos roofs detection to assess the environmental risk

High-Temperature Transformation of Asbestos Tailings by Carbothermal Reduction

Thermal Behavior of Ceramic Bodies Based on Fly Ash and Smectites

Preservation of geochemical markers during co-combustion of hard coal and various domestic waste materials

Impact of Calcium Oxide on Hygienization and Self-Heating Prevention of Biologically Contaminated Polymer Materials

Investigation of Spent Moulding Sand Using Thermal Treatment with Regard to the Possibility of Recovering Quartz Matrix

Thermal behavior of coal fly ash geopolymers: structural analysis supported by molecular dynamics and machine learning methods

Study on Phase Behavior and Mechanical Properties of High Temperature Resistant Materials Prepared from Waste Electric Porcelain

Thermal treatment of carbon-fibre-reinforced polymers (Part 2: Energy recovery and feedstock recycling)

Thermally-treated asbestos-cement wastes as supplementary precursor for geopolymeric binders: CO 2 emission and properties

Thermal treatment of waste from the meat industry in high scale rotary kiln

Thermal Studies of Fractionated Lignite and Brown Coal Fly Ashes