Asbestos cement products and their impact on soil contamination in relation to various sources of anthropogenic and natural asbestos pollution

Andrzej Obmiński

DOI: https://doi.org/10.1016/j.scitotenv.2022.157275

2022-11-20

Abstract:The results of a quantitative analysis of asbestos content in the ground with varying degrees of concentration of this mineral as a result of natural phenomena such as rock weathering, contamination by the manufacture of asbestos and cement products, and the many years of use of "eternit roofs" are presented. Preliminary thermal treatment, soil grinding and sieving were used for the determinations, followed by electrostatic separation in order to obtain the concentration of asbestos in a smaller volume. It was used for microscopic preparations for the identification and planimetry of asbestos. A polarizing optical microscope was used in the qualitative and quantitative analysis. The levels of re-emission of asbestos dust into the air as a result of the exploitation of contaminated soil were estimated. Polluted land in industrially areas, at a distance of up to 1200 m, contains 0.0003 % to 0.02 % asbestos. The content of 0.01 % asbestos does not require remediation in the absence of soil use. It may cause <500 fibres/m3. Removing the facade of asbestos-cement panels from the building at a distance of up to 10 m resulted in concentration <0.007 % of free asbestos in the ground, and for used roofs <0.001 % from above the distance of 3 m. This means that land in the vicinity of buildings with facade or roofing made of a-c products can be safely exploited. The direct discharge of rainwater from the gutter into the ground, however, contaminates it well above this value and those places should be treated as hazardous waste due to the presence of asbestos fibres in unbound form, containing <9,8 %. Ultimately, the size of the threat depends on many factors and can be comparable with the pollution of industrial production.