Abstract:This study investigates a circulating fluidised bed (CFB) incineration plant to examine the concentrations and fingerprints of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), and biphenyls (PCBs) at five locations downstream of the post-combustion zone. Sampling encompassed both flue gas and ash, spanning from the high-temperature superheater to the outlet of the baghouse filter, thus covering a wide range of flue gas temperatures. The analysis reveals a continuous increase in PCDD/F and PCB concentrations in the flue gas from the superheater to the inlet of the air pollution control system (APCS). The maximum concentrations observed were 75.8 ng/Nm 3 for PCDDs, 219 ng/Nm 3 for PCDFs, and 763 ng/Nm 3 for PCBs. These values represent 9.14, 11.5, and 6.37 times their respective concentrations at the outlet of the high-temperature superheater. Concurrently, the levels of PCDD/Fs and dioxin-like PCBs (dl-PCBs) in the ash steadily increased along the cooling path of the flue gas within the plant. Comparing dl-PCBs to the total amount of 209 PCB congeners, it was evident that dl-PCBs exhibited a trend more akin to that of PCDD/Fs. A robust linear correlation was observed between dl-PCBs and PCDD/Fs ( R 2 = 0.99, p < 0.001), surpassing that between PCBs and PCDD/Fs ( R 2 = 0.92, p < 0.01), suggesting that dl-PCBs share closer formation pathways with PCDD/Fs. Additionally, elemental composition analysis of fly ash samples aimed to explore potential links between fly ash characteristics and PCDD/F and PCB formation. The Cl/S ratio increased from 1.58 to 5.13 with decreasing flue gas temperature. Principal component analysis (PCA) was employed to visualise the concentrations of PCDD/Fs and PCBs in the flue gas alongside elemental contents in the fly ash. With the exception of PCBs in ash, all other PCDD/Fs and PCBs in fly ash exhibited positive correlations with both carbon (C) and chlorine (Cl). Furthermore, a positive relationship between C/Cl and PCDD/Fs-PCBs in fly ash implies that fly ash serves as the primary reaction surface for dioxin generation during low-temperature heterogeneous catalytic reactions.

Analysis of PCBs in Five Kinds of Fly Ash Using Microwave-Assisted Extraction

Effect of Moisture Content on Microwave-Assisted Extraction of PCBs and Chlorobenzenes

The Degradation of PCDD/Fs in Fly Ash Using Dielectric Barrier Discharge in a Lab-Scale Reactor

Characterization of Dioxins and Heavy Metals in Chelated Fly Ash

Mechanical Treatment of MSWI fly Ash: A Way Forward to Inhibit PCB Reformation

Mechanochemical Treatment of Fly Ash and De Novo Testing of Milled Fly Ash

Degradation of Dioxins in Chelated Municipal Solid Waste Incineration Fly Ash by Low-Temperature Pyrolysis

Characteristic of polychlorinated dibenzo-p-dioxins and dibenzofurans in fly ash from incinerators in china.

Inventory of PCDD/Fs and Fly Ash Characteristics during the e-Waste and Municipal Solid Waste Co-Incineration Process

Improving Microwave-Assisted Hydrothermal Degradation of PCDD/Fs in Fly Ash with Added Na2HPO4 and Water-Washing Pretreatment.

Experimental Study on Low Temperature Thermal Treatment of Polychlorinated Dibenzo-P-dioxins and Dibenzofurans (pcdd/fs) in Fly Ash

Degradation of PCDD/Fs in MSWI Fly Ash Using a Microwave-Assisted Hydrothermal Process

Distribution of PCDD/Fs and PCBs at different locations in a circulating fluidised bed municipal solid waste incinerator

De novo formation of dioxins from milled model fly ash

A study on the chemical and mineralogical characterization of MSWI fly ash using a sequential extraction procedure

Hydrothermal Decomposition of Polychlorinated Divenzo-p-dioxins and Dibenzofurans in Fly Ash of Medical Waste Incinerator

Behavior of PCDD/Fs, PCBs, CBzs and PAHs During Thermal Treatment of Various Fly Ash from Steel Industry

EXPERIMENTAL STUDY ON LOW TEMPERATURE THERMAL TREATMENT OF PCDD/Fs IN FLY ASH

Characterising boiler ash from a circulating fluidised bed municipal solid waste incinerator and distribution of PCDD/F and PCB

Mechanochemical Degradation of Ocdd/Ocdf in Fly Ash from Medical Waste Incinerators

Effect of Feed Forms on the Results of Melting of Fly Ash by a DC Plasma Arc Furnace