Abstract:As micropower devices, microfluidic fuel cells (MFCs) have gained much attention due to their simple configurations and high power densities. MFCs exploit the parallel laminar flowing of two electrolytes in a microchannel with a characteristic length from 1 to 1000 μm to separate the anolyte and catholyte, without the proton exchange membranes in the traditional fuel cells. These membrane-less configurations can avoid a series of technical problems related to the membranes. To achieve an MFC with high power density and low cost, we constructed the direct formate MFCs with two catalyst-free oxidants containing FeCl and NaSO solutions, respectively, and compared the performance of the two MFCs. Due to NaSO being an oxidant with some distinctive advantages, including its high theoretical potential, high solubility of itself and its reduction product, and environmental friendliness, the NaSO-based MFC showed a higher open-circuit voltage (>2.0 V) and better performance. Then, we studied the effects of oxidant concentrations, flow rates, and fuel concentrations on the performance of the NaSO-based MFC. The results showed the optimum performance of the NaSO-based MFC with the peak power density of 214.95 mW cm and the limiting current density of 700.13 mA cm under the conditions of 1.5 M HCOONa, 2 M NaSO, and 300 μL min at an anolyte/catholyte flow ratio of 2:1. The performance was also the highest among the direct formate MFCs reported up to now. Moreover, the NaSO-based MFC could stably discharge for about 4 h under a constant voltage. All of the results demonstrated that NaSO was a suitable oxidant and that the NaSO-based MFC could realize the goals of high power density and low cost for the actual application of MFCs.

Potassium Permanganate as an Oxidant for a Microfluidic Direct Formate Fuel Cell

High Power Density Direct Formate Microfluidic Fuel Cells with the Different Catalyst-Free Oxidants.

A microbial fuel cell using permanganate as the cathodic electron acceptor

A Study of the Direct Dimethyl Ether Fuel Cell Using Alkaline Anolyte

Effect of cathode electron acceptors on simultaneous anaerobic sulfide and nitrate removal in microbial fuel cell

High-performance direct methanol alkaline fuel cells using potassium hydroxide-impregnated polyvinyl alcohol/carbon nano-tube electrolytes

An alkaline direct methanol fuel cell with a polymer fiber membrane and MnO2-catalyzed cathode

A Paper‐based Self‐pumping Microfluidic Fuel Cell Stack with a Novel Vertical Structure

Comparing Study on Electricity Generation from Different Cathodic Electron Acceptors in Microbial Fuel Cell

Oxygen Reduction Reaction with Manganese Oxide Nanospheres in Microbial Fuel Cells

Assessing the Performance of Continuous-Flow Microbial Fuel Cells and Membrane Electrode Assembly with Electrodeposited Mn Oxide Catalyst

A breakthrough in the performance and fuel utilization of methanol microfluidic fuel cell via viscous co-flow electrolyte

A liquid-electrolyte-free anion-exchange membrane direct formate-peroxide fuel cell

Nano-structured Manganese Oxide As a Cathodic Catalyst for Enhanced Oxygen Reduction in a Microbial Fuel Cell Fed with a Synthetic Wastewater.

Dual Oxidation by Hybrid Electrode: Efficiency Enhancement of Direct Hypophosphite Fuel Cell

Hydroxide Self-Feeding High-Temperature Alkaline Direct Formate Fuel Cells

Effect of cathode gas flow patterns on performance of micro direct methanol fuel cell

Direct methanol biocatalytic fuel cell--considerations of restraints on electron transfer

Enhanced performance of a direct methanol alkaline fuel cell (DMAFC) using a polyvinyl alcohol/fumed silica/KOH electrolyte

Design, Fabrication and Testing of an Air-Breathing Micro Direct Methanol Fuel Cell with Compound Anode Flow Field

An Air-Breathing Micro Direct Methanol Fuel Cell with 3D KOH-Etched Cathode Structure