Abstract:This work improves the tribological behavior via innovative surface designs for slipper pairs in seawater axial piston pumps. 316L stainless steel and carbon fiber/polyether ether ketone (CF/PEEK) were selected as friction pair matching materials due to their good corrosion resistance, self-lubrication, and wear resistance. One type of smooth surface and five different types of pit nonsmooth surfaces were created on CF/PEEK specimens. Rotational sliding tests were performed on a friction and wear tester at a load of 200 N at five different sliding speeds (0.79, 1.18, 1.57, 1.96, and 2.36 m/s) under seawater lubrication. The experimental results indicate that the friction process of the smooth surface friction pair is mainly based on abrasive wear and adhesive wear. The friction coefficient range is 0.05–0.08, the specimen contact temperature is 38–75 °C, and the wear rates of 316L and CF/PEEK are 2.3 × 10−5 to 1.2 × 10−4 mm3/(MPa·m) and 5.6 × 10−4 to 7.6 × 10−3 mm3/(MPa·m), respectively. Pits on the specimen surface produce a hydrodynamic effect and store wear debris. The friction process of the nonsmooth surface friction pair is mainly controlled by a ploughing mechanism with only a slight amount of adhesive wear. The friction coefficient range is decreased to 0.03–0.07, the specimen contact temperature is decreased to 28–54 °C, and the wear rates of 316L and CF/PEEK are decreased to 1.2 × 10−5 to 9.1 × 10−5 mm3/(MPa·m) and 2.6 × 10−3 to 7.1 × 10−3 mm3/(MPa·m), respectively. The geometrical arrangement of the elliptical and tri-prism pits increases the convergence gap range and produces a higher bearing capacity. As the sliding speed increases, the friction coefficient first decreases and subsequently slightly increases, the specimen contact temperature increases, and the wear rate decreases.

Tribocorrosion Behavior of Several Corrosion-resistant Alloys Sliding Against CF-PEEK: Application for Hydraulic Valve in Seawater

Tribological behavior of modified polyetheretherketone composites in sliding against stainless steel under water lubrication

Tribological behavior of various ceramic materials sliding against CF/PTFE/graphite-filled PEEK under seawater lubrication

Tribocorrosion properties of AISI 1045 and AISI 2205 steels in seawater: Synergistic interactions of wear and corrosion

Comparative Investigation on the Tribocorrosion Resistance of Ti6Al4V and 60NiTi Alloys in Simulated Seawater Environment

Tribological Behaviors of Carbon Fiber–Reinforced PEEK Sliding on Ion-Nitrided 2Cr13 Steel Lubricated with Tap Water

Friction and Wear Behavior of Paired Pairs of Ceramics and Metal in High-Pressure Pump of Seawater Desalination

Tribological Properties of Friction Pair between 316L Stainless Steel and CF/PEEK with Nonsmooth Surface under Seawater Lubrication

The Difference in Tribological Characteristics between CFRPEEK and Stainless Steel under Water Lubrication in Friction Testing Machine and Axial Piston Pump

Tribocorrosion Behavior of GCr15 Steel in Water–glycol Fire-Resistant Hydraulic Fluids (HFC) Containing Seawater

Surface tribological and electrochemical properties of TiAlSiN coating in seawater

Influence of bionic non-smooth surface texture on tribological characteristics of carbon-fiber-reinforced polyetheretherketone under seawater lubrication

Effect of Micro-Textured Surfaces and Sliding Speed on the Lubrication Mechanism and Friction-Wear Characteristics of CF/PEEK Rubbing against 316L Stainless Steel under Seawater Lubrication

Excellent tribocorrosion resistance in artificial seawater of high entropy alloy FeCrNiCoAl coating prepared by HVOF

A comparative analysis of different surface tribological and electrochemical properties of TiAlN, TiAlSiN, and CrAlN thin film coatings in seawater

Tribocorrosive Aspects of Tungsten Carbide, Silicon Nitride, and Martensitic Steel under Fretting-like Conditions

Reliability assessment of PEEK/17-4PH stainless steel tribopair under seawater lubrication

Evaluation of pitting susceptibility and tribocorrosion behaviors of AISI 304 stainless steel in marine environments

Material Analysis and Molecular Dynamics Simulation for Cavitation Erosion and Corrosion Suppression in Water Hydraulic Valves

COMPARATIVE STUDY ON CORROSION BEHAVIOR OF 316 STAINLESS STEEL AND Ti6Al4V ALLOY IN SIMULATED SEAWATER

Dual-Function Hybrid Coatings Based on Polytetrafluoroethylene and Cu2O for Anti-Biocorrosion and Anti-Wear Applications