Abstract:Short-carbon-fiber-reinforced polyetherimide (SCF/PEI) composites have good mechanical properties and are expected to have wide applications including components serving under water lubrication conditions. However, no work has been reported on the tribological behaviors of SCF/PEI composites under water lubrication conditions. This work attempts to explore the practicality of the SCF/PEI composite from a tribological point of view under water lubrication conditions. SCFs are coated by polydopamine (PDA) to enhance the interfacial interaction between fibers and matrix. The tribological performances of SCF/PEI composite are systematically investigated by sliding wear tests under tap and sea water lubrication conditions. Experimental results show that the SCF/PEI composite has a better friction performance in water lubrications than that under dry sliding because of the separation effects formed by a water molecule film and a transfer film. However, no remarkable differences of wear resistance are found between water lubrication and dry contact conditions, and the magnitude of specific wear rate under these conditions is around 1×10-6 mm3/N·m. It is found that contact surface hardness of the SCF/PEI composite is reduced after a sliding test in water due to the plasticization phenomenon, especially sea water can accelerate the diffusion of water molecules into matrix, making the specific wear rate in sea water is ten times of that in tap water for highly-loaded conditions. Meanwhile, the abrasive wear is observed to be the dominated wear mode in boundary lubrication regime, and the adhesion wear occurs around the transition position from the boundary to mixed lubrication regime. It is also found that pressure has a significant effect on the temperature rise within the contact surface than the speed does. Finally, the tribological performance of the SCF/PEI composite under water is exhibited to be better than that of most of polymers and composites reported previously.

Influence of bionic non-smooth surface texture on tribological characteristics of carbon-fiber-reinforced polyetheretherketone under seawater lubrication

Tribological Properties of Friction Pair between 316L Stainless Steel and CF/PEEK with Nonsmooth Surface under Seawater Lubrication

Tribological behavior of modified polyetheretherketone composites in sliding against stainless steel under water lubrication

Effect of Micro-Textured Surfaces and Sliding Speed on the Lubrication Mechanism and Friction-Wear Characteristics of CF/PEEK Rubbing against 316L Stainless Steel under Seawater Lubrication

Friction and Wear of Self-Mated SiC and Si 3 N 4 in Green Water-Based Lubricant

Tribological behavior of various ceramic materials sliding against CF/PTFE/graphite-filled PEEK under seawater lubrication

Tribocorrosion Behavior of Several Corrosion-resistant Alloys Sliding Against CF-PEEK: Application for Hydraulic Valve in Seawater

The Difference in Tribological Characteristics between CFRPEEK and Stainless Steel under Water Lubrication in Friction Testing Machine and Axial Piston Pump

Influence of Friction Properties Between Non‐Smooth Surface GFER and 316L Stainless Steel Under Seawater Lubrication and Simulation Research

Coupled effect of filler and countersurface roughness on the tribological performance of the PEEK-PTFE-steel hybrid wear system

Analysis on anti‐wear mechanism of bionic non‐smooth surface based on discrete phase model

Tribological Properties of Carbon Fiber-Reinforced PEEK Against 304 Stainless Steel with Reticulate Surface Texture.

Tribological Behavior and Lubricating Mechanism of Si3N4 in Artificial Seawater

Tribological Behaviors of Carbon Fiber–Reinforced PEEK Sliding on Ion-Nitrided 2Cr13 Steel Lubricated with Tap Water

Simulation Study on Bearing Lubrication Mechanism and Friction Characteristics of the Biomimetic Non-Smooth Surface of a Cross-Scale, Second-Order Compound Microstructure

Numerical simulation on hydrodynamic lubrication performance of bionic multi-scale composite textures inspired by surface patterns of Subcrenata and Clam shells

Tribological behavior of short carbon fiber reinforced polyetherimide composite under water lubrication conditions

Friction and Wear Behavior of Paired Pairs of Ceramics and Metal in High-Pressure Pump of Seawater Desalination

Effect of bionic shield texture on friction behavior of Silicon Carbide under water lubrication condition

EFFECT OF MICRO-TEXTURES AND CrAlSiN COATINGS ON THE FRICTION AND WEAR PROPERTIES OF 316L STAINLESS STEELS IN SEAWATER

Influence of Variable-Depth Groove Texture on the Friction and Wear Performance of GCr15–SiC Friction Pairs Under Water Lubrication